Question about BenQ T705 17" LCD Monitor

1 Answer

Dead screen my monitor turned off by itself and not showing anything,

Posted by on

  • Anonymous Jul 05, 2008

    same problame

×

1 Answer

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a red dot on the screen. I tink its a dead pixel? Can this be repaired?


Hi!
There are 2 ways you can try to fix dead pixel: Try online tool like http://www.jscreenfix.com/basic.php
OR
Try this quick guide to fix dead pixels
  1. Turn off your monitor.
  2. Get yourself a damp cloth, so that you won't scratch the screen.
  3. Apply pressure to the area where the stuck pixel is. Try not to put pressure anywhere else, as this may trigger the creation of more stuck pixels.
  4. While applying pressure, turn on your computer and screen.
  5. Remove pressure and the stuck pixel should be gone.
If none of these works, than you can't do anything with it.
Hope it helps

Jul 12, 2011 | HP w1907 LCD Monitor

2 Answers

Monitor keeps turning on and off? it wont even show the screen for more than a second or two and then switch to black again.


your LCD inverter is almost dead. the monitor itself actually remains on, but just goes to black each time the LCD inverter cuts out, since this is what supplies white light to the screen.

In case you wanted The FP5315 Users Guide, or 3 other HP documents for the HP FP5315 LCD Flat Panel Monitor:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&lang=en&product=324205&

Jan 05, 2011 | HP Compaq FP5315 15" LCD Monitor

1 Answer

What does it mean by dead cells?


I assume this is related to your LCD monitor.
I think you mean dead pixels. The LCD monitor has tiny pixel elements, one for each red, blue, green color and each one of these colored pixels are turnes on by a transistor. When a transistor fails then the colored pixel it controls does not light up. This is a dead pixel and it shows up as a tiny black dot.
If the screen displays a blue screen, a dead blue pixel will appear as a tiny black dot in the blue screen.
You normally would not notice a few dead pixels unless they are grouped together.

Sep 20, 2010 | Hanns.G Corporation HW191D 19" LCD Monitor

2 Answers

Monitor goes blank after 3 seconds -Samsung SyncMaster 920NW


Could be a power issue. If it doesn't show anything at all then that may be the case. It may also be the display itself. It would be a costly repair so you might be better off finding a new monitor.

Sep 16, 2009 | Samsung SyncMaster 920NW Monitor

2 Answers

My monitor shows "auto detection mode


make sure the video card is securly placed in the pci-e slot

Aug 19, 2009 | Dell E228WFP LCD Monitor

1 Answer

My monitor doesnt show anything on the screen


This could be due to bad solder connections, or it could be that parts have failed. In either case, there's nothing that you'll be able to do to fix this yourself unless you have some electronic soldering and TV service skills. LCD monitors have become so cheap today that it is completely ridiculous to pay a shop to repair the monitor (if you can find one that will even try). Just replace it.

Apr 08, 2009 | HP Compaq FS7600 17" CRT Monitor

2 Answers

Monitor problem


Hi...there,
It's turns blue to power safe mode (yellow) it's prevent futher damaged to your monitor. It's seems you got a busted backlight inverter. Need to replaced a new one...Since you only got it for a few months, send it back to Acer for a replacement of a new backlight inverter... Have a nice day!

Oct 17, 2008 | Acer AL1916W 19" LCD Monitor

1 Answer

When it's turned on, the light on my monitor blinks but the screen doesn't display anything. Why might this be happening, and how can I fix it? Monitor will go on for a split second, then screen will go...


they normally turn off like this when they aren't receiving a video signal from the pc (same as when you turn off the pc). make sure that it is connected properly, and that the video output is activated. try disconnecting from the other monitor while its on and connect the problem monitor...if it still isn't working then there may be a problem with the cable or the monitor itself. Try another VGA or DVI cable. Hope this helps

Mar 29, 2008 | Computer Monitors

1 Answer

Proview PRO576 error message "mode not supported" and will show nothing else


Okay, we got a fix by having another monitor hooked up to our computer and going in to display and changing the display settings to a lower setting. The screen resolution - turn it to lower - I guess somehow - the setting was too high for our monitor. Don't know how it changed itself though. Anyway, change it to a lower resolution then re-hook up your monitor and see if it works. The reslution can be pushed back up until you notice the problem again.

Mar 05, 2008 | Proview PRO576 15 in. Flat Panel LCD...

Not finding what you are looking for?
BenQ T705 17" LCD Monitor Logo

Related Topics:

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computer Monitors Experts

Tony

Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a BenQ Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...