Question about RCA RT2500 System

1 Answer

DSP settings not being saved.

I had a problem with the buzzing and changed the capacitors and that fixed the problem. Now my DSP seetings aren't being saved when I turn off the receiver.

I.e I set the DSP to club, turn off the receiver and the DSP is off and the prologic is on. Before I changed the capacitors I could have the DSP set to whatever and when I turned the receiver on it was still set.

Posted by on

  • Flux690 Apr 07, 2008

    No, I'm turning it off with the remote or the power button on the unit. The remote is the original remote.



    I suspect it has a writable eprom that got burnt out but the fact that the only thing not staying set is the DSP settings leads me to think it's not that. It doesn't matter if I set the DSP to club, theater, arena, etc. When I turn it off and then back on it's always reset to the prologic setting. Plus all the other settings are being saved. Like the bass and treble settings, speaker volumens and settings. The digital.analog audio setting. These are all staying the way I set them.



    I'm not an electronics person, but I know enough that if someone tells me what to replace I can replace it.

  • Graeme Ross
    Graeme Ross May 11, 2010

    Hi there Flux690, are you turning it off at the wall?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi, happy to talk to you about it... give me a yell

Posted on Apr 10, 2008

  • Graeme Ross
    Graeme Ross Apr 14, 2008

    Does it have a super cap for mem backup. These caps fail frequently. 5 volt, often 0.05 Farad in capacity, they are recognized by their shape, about 4-5mm think and diam of 5 cent piece. Check the voltage across this cap after being turned off. Replace it with one out of another junked unit to keep the cost down.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Onkyo sr600 memory problem


I had the same problem with my TX-SR601 receiver.
Solution: I changed the capacitor C766 (100uF/6,3V) on the "DSP and main microprocessor" or "U1" board. This capacitor is responsible to keep the settings in the memory. It is directly next to the SRAM ICs (Q705-706) (type: CY7C1019BV/CV33-15VCT).
Now the receiver works properly again.

Mar 04, 2012 | Onkyo TX-SR601 Receiver

1 Answer

Mms/wap


Hi,
MMS seetting required for using MMS serviece(GPRS seetting and MMS setting is different).
To get the MMS setting please call your service provider.
They will send you the MMS setting.After you receive please save the settings to your
phone.
Then you can start send and receive MMS without ant problem.

Good Luck.
Thanks for using FixYa.

Feb 24, 2011 | Nokia 2720 Fold Cell Phone

1 Answer

Cannot recieved mms


Hi,
MMS seetting required for using MMS serviece(GPRS seetting and MMS setting is different).
To get the MMS setting please call your service provider.
They will send you the MMS setting.After you receive please save the settings to your
phone.
Then you can start send and receive MMS without ant problem.

Good Luck.
Thanks for using FixYa.

Feb 14, 2011 | Motorola Mobility SLVR L7 Cellular Phone

1 Answer

Cant open my mms !


Hi,
MMS seetting required for using MMS serviece(GPRS seetting and MMS setting is different).
To get the MMS setting please call your service provider.
They will send you the MMS setting.After you receive please save the settings to your
phone.
Then you can start send and receive MMS without ant problem.

Good Luck.
Thanks for using FixYa.

Feb 09, 2011 | LG GD330 Cell Phone

1 Answer

I cant recieve or send mms


Hi,
MMS seetting required for using MMS serviece(GPRS seetting and MMS setting is different).
To get the MMS setting please call your service provider.
They will send you the MMS setting.After you receive please save the settings to your
phone.
Then you can start send and receive MMS without ant problem.

Good Luck.
Thanks for using FixYa.

Feb 05, 2011 | Samsung B3410 Cell Phone

2 Answers

Carlsbro dsp marlin amp is buzzing loud constantly even without anything plugged in, can anyone help?


Hi,

If it's buzzing even when the volume is down, there must be a problem in the power supply.
Then you have to look if there's a diode or capacitor not correct.

Kind regards,
Gerard

Feb 07, 2010 | Audio Players & Recorders

1 Answer

Samsung Alias 2 camera from Verizon displays "Camera DSP error" when attempting to save photograph


I changed the memory settings to save pictures on the phone memory. I was then able to save the picture taken. I then turned the phone off removed the memory card and put it back in. I turned the phone on and changed themeory settings back to saving the picture on the card. I took a picture and was able to save it. The pictures were viewable on the camera.

Dec 27, 2009 | Samsung Alias 2 SCH-U750 Cell Phone

2 Answers

My TV is buzzing nonstop. What will fix this??


is it buzzing when turned off or just on and is it buzzing durning bright scenes or just buzzing bright scene change buz is an If problem . in todays set , the best thing to do is change out the signal board sometimes
it could be a transfomer laminate buzz in the case your best bet would be to hire a tv tech to take a listen

Nov 20, 2009 | Akai PTH5498 54" Rear Projection...

1 Answer

Audio thump on changing any parameter


My bet is a faulty electrolytic capacitor! Don't know which. but would look around the circuit of those stages.

May 30, 2009 | Yamaha DSP-AX1 10-Channel Amplifier

2 Answers

NAD T751 constant buzz


It is a known problem with this model. The source of the buzz is the Dsp power supply. On the DSP board itself there is a 2200my\f/16v capacitor that is defective . Usually the capacitor will turn brown and swells due to overheating. Replace it with a higher temp rating capacitor with the same capacitance and voltage specifications.

Sep 26, 2008 | NAD T751 Receiver

Not finding what you are looking for?
RCA RT2500 System Logo

Related Topics:

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...