Question about Televison & Video

1 Answer

Remote was hit, shut set off, and can't get it back on. Sounds like timer is on.

T.V. remote was hit by toy. The set shut off and won,t come back on. Sounds like timer is on, but I can't figure out how to unlock the timer.

Posted by on

  • BUZZOBER Jan 04, 2009

    MY TV DOES NOT TURN ON.. WHEN I PRESS THE ON BUTTON IT WILL ONLY BLINK AND SHUT OFF AND IF IT WILL TURN ON NO PICTURE IS COMING OUT BU I CAN HEAR THE VOLUME... HELP! THANK A MILLION.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 119 Answers

First try turning the TV on from the Power button the set itself (assuming it has one).

If not, unplug the TV from the wall, wait a half hour, then plug it back in. It should come back on.

Also check that none of the buttons on the remote are stuck down, and that the batteries in the remote are OK. The toy might've stuck a repeating button down (like volume) which may have then drained the remote's batteries.

Posted on Apr 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a non responsive tv set?


Do the ballast first. That should get the picture back. The main board controls everything else.

Oct 08, 2016 | Televison & Video

1 Answer

GE VG4020 constantly say's timer is set and won't record .


You can try the makers website for the book, they might have a free pdf of it. You will struggle without a remote though. Enter the model number into Google and see if you can find a remote for the model. If they are too expensive for the original, then get a good quality universal. But i would always recommend the original remote over universals.

Feb 03, 2013 | Televison & Video

1 Answer

Picked up Scientific Train G-Scale train at a sale. Looks like new. Put new batteries in, plugged tender to locomotive, tuned the bell and pushed the only other moveabel part on top. Won't go and...


yes you need a remote for the sounds.

Dear Customer,First of all, we would like to take this opportunity tothank you for choosing Scientific Toys products.We will supply a new remote controller with the postagecost of US$10.00 in U.S. If you are interested to have a replacement, pleaseadvise your full mailing address in detail by return email.Upon receipt of your confirmation, we will advise thepayment method. Please do not hesitate to contact us at service@scientific.com.hk if youneed further assistance.Best regards, Customer ServiceScientific Toys, Ltd.

Jun 01, 2011 | Scientific Toys North Pole Express Xmas...

1 Answer

My tv turns off after about 10 mins and sometimes a few hours for know reason


Ok not sure if this is your problem, BUT, I have done this before! If you hit the SLEEP button on your TV's Remote control you may be setting the SLEEP TIMER on your TV. It is made so you can watch a show and fall asleep on your couch and the TV will shut off after a specified time. On mine it is anywhere from 30 minutes to 3 HOURS! My remote says the word SLEEP over the timer button. not sure on yours
Hope that solves the problem, just hit the button until the word "OFF" shows on your screen.

Feb 27, 2011 | Televison & Video

1 Answer

I have a Viper 5301 LE 2 way remote starter system installed in a manual transmission. When I set my starter everything seems to be functioning normally. Once I get out of the car and hit the lock button...


It sounds like the turbo timer mode is active. In this procedure, the MTS remote starter is active, it's just that once set (after locking the vehicle) the vehicle will run the preset time(1,3,5 or 10 minutes) before shutting down. The MTS remote starter feature should still operate with the turbo timer mode.

Feb 08, 2011 | 5301 LE 2 Way Car Remote Starter System

1 Answer

How do you set on and off mode on air conditioning


Use the remote to enter the timer to switch off - OFF timer setting and the On timing after setting the clock on the remote
Once this is presetted the unit will continue to work shut of in the thermostat settings and fully cuts off power in the set off time.
later the set will come back in the set on time and work till the thermostat setting is reached.

Aug 29, 2010 | LG Heat cool Window Air Conditioner

1 Answer

Tv just goes blank shoots off then i have to turn it back o n


Using the menu/options button, check whether there is a sleep timer. You may have accidentally set it, and it will shut off the tv at either a particular time, or after a period of time has elapsed.

Jun 30, 2009 | RCA Universal Remote Control

1 Answer

VCR not timer recording, VCR will not turn on with timer


If no menu, unplug, and let it set a few minutes. Replug and the on-screen menu should appear. Reset the set-up (date, etc). I had the same experience as one of the other posters with JVC customer service telling me the menu button on the remote was malfunctioning, and I should purchase a new remote from them.
After you input your programming, be sure to hit the Timer button on your remote. If you want to change tapes or playback, you will need to hit the Timer button again (take it off Timer) for access to your VCR. Be sure to reset it to Timer afterwards, or you will not be able to record.

Feb 17, 2009 | JVC HR-A592U S-VHS VCR

1 Answer

Av-32d302 tv


The set is shutting down because a problem has been detected. Replacing the remote will not help. Count the flashes and call a JVC servicer to get an idea about what the specific problem may be.

Dan

Jul 29, 2008 | JVC AV-32D302 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...