Question about Compaq TFT450 14" LCD Monitor

1 Answer

Connection how can i connect power and comunication compaq tft450 monitor to my hp pcmobile 5200 or other pc runs windows vista or xp right now i dont have any cables please for help chris

Posted by on

  • patkurl Jan 23, 2009

    im gettin error n a blue screen with all technical problems written all over my screen..help please

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 119 Answers

Your HP notebook PC probably has a VGA (aka HD-15) connector. Check page 16 of this PDF to make sure - connector #2 is the VGA connector.

Your Compaq monitor also has a VGA HD-15 connector, so it should plug directly into your laptop's port after unplugging it from the other PC.

You will still need to plug the Compaq monitor's power cable into a wall outlet for power.

If you are going to share this monitor between your notebook and the other PC, you may want to consider purchasing a Keyboard-Video-Mouse switch (known as a "KVM switch") - there are many different models - you will need one with VGA, and whether you need USB or PS/2 keyboard/mouse connections depends on what your other PC's keyboard and mouse are.

Posted on Apr 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hp compaq presario cq50 cannot connect to the internet via modem, this issue began when i installed windows 7


Were you running windows xp and then upgraded or replaced your operating system with Windows seven? If so, then your right - your problem did begin with windows seven.
There is an ethernet adapter driver in Windows xp that is not available in Windows seven. I would suggest going to Hp's website and click on support and then chat services and give them the info on your pc and ask for a link to download the driver you need to connect to the internet. they can assist you with this for free.

Oct 14, 2011 | HP Compaq Presario CQ50-103NR Notebook PC

2 Answers

How to install a exterior monitor on a presario F700


1plug in monitor 2.right click desktop go to properties (on XP) or screen resolution (on 7 or vista) you should see two boxes labeled one and 2 double click 2 that's you monitor...on xp in the properties window go to settings tab to find that option, if it does not show up reset your computer with external monitor plugged in and repeat process if necessary if that doesn't work you need to update driver for your graphics card/chip

Apr 09, 2011 | HP Compaq Presario F500 F700 and G6000...

1 Answer

I have it connects to my compaq hp presario f700 laptop and there are faint lines moving in the background of my display. SO i connected it to my Compaq presario CQ60 Laptop and the lines were gone. How do...


you need to adjust the screen refresh rate.

right click on the desktop, then select "properties" then the "settings" tab for XP or "personalize" then "display settings" for vista/7. next, select "advanced" for xp or "advanced properties" for vista/7". finally, select the "monitor" tab and try other refresh rates until you find the one that eliminates the lines.

if this does not fix it, then you may need a new monitor cable.

Nov 07, 2010 | Computers & Internet

2 Answers

Can I run Windows 7 64-bit Home Premium on my HP Compaq Presario SR2170NX PC Desktop


This computer came with Vista Basic. You can upgrade Vista Basic to Windows 7 Premium but it depends on your hardware. Go here: http://windows.microsoft.com/en-US/windows/downloads/upgrade-advisor Run the upgrade advisor and follow their advice.

May 05, 2010 | HP Compaq Presario SR2170NX (RK549AA#ABA)...

1 Answer

Cpu powers on. Monitor goes to Windows XP and


Dear, This is due loose connection of power cable
(which connect from CPU TO MONITOR). Just check your power, m sure ur problem would be fix out.

Feb 01, 2010 | Generic Memory Compaq Presario SR1215CL by...

1 Answer

I can't install XP after deleting Vista into my laptop, error 'harddrive was not found' please help with solution. (HP compaq presario c700 cto)


hi there you need to formate you notebook and then
load window xp

if you dont come right email me on info@jvcomp.co.za

Dec 14, 2009 | HP Compaq Presario C700T

1 Answer

Connect tv to computer


Be sure to enable the second screen through the windows display settings. Right click on the desktop background and select personalize (VIsta) or Properties (XP). Click on the settings menu (lower down on Vista, a tab on the right for XP) and look at the monitor setup. After you are connected via cable to the TV, go there, click on the second screen and select "enable this monitor", "extend desktop onto this monitor" or something of the like. Oftentimes it will not do it if you are not already physically plugged in so ensure that you do that first.

Aug 26, 2009 | HP Pavilion Elite M9150F Desktop PC

1 Answer

What connection cables?


You need a standard Male To Male Vga Cable for this monitor.

Mar 16, 2009 | Compaq TFT450 14" LCD Monitor

1 Answer

Power connection pinout


Here is a pin connection specification for the ac power supply (dual voltage adaptor)
>socket/plug for a Compaq TFT450 LCD Monitor that she
>supplied (edited for further clarity).
>
>The pins of the male connector (a PS2 mouse type connector) should be connected like this:
>
>
>
> 1 2
>
> 3 I 4
>
> 5 ^ 6
>
>
>
> GND GND
>
> 5V I 12V
>
> 5V ^ 12V
>
>
>
>For clarification - the male will be the end of your cable, and not the socket on the monitor.
>The I is the central polarising bar of the connector, and the ^ is the notch.

Jun 16, 2008 | Compaq TFT450 14" LCD Monitor

3 Answers

Windows Vista problem


You need to download the driver, go to the web site and find the download
http://www.norcent.net/main/support_product.asp

Nov 26, 2007 | Microsoft Windows XP Professional With...

Not finding what you are looking for?
Compaq TFT450 14" LCD Monitor Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...