Question about Printers & Copiers

1 Answer

Sharp AR-5132 copier won't copy, no error message

I've got a sort of odd problem, and was wondering if anyone had run into anything like this. I've got a Sharp AR-5132 copier and it won't start copying. No error message, the LCD says "Ready to copy", it'll respond to keypresses on the keypad, but it just doesn't do anything when I press Start. I've got it to try and start a few times by pressing Start when it's doing its initial power on tests, but then it gives my a paper feed error. I've been racking my brain over this but I just can't think of anything. Thanks--Richard

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 82 Answers

Okay start by loading a piece of paper on the glass and choosing maual feed and placing a sheet of paper in the manual feed tray and press the start key and see what happens. also on some of the sharp copiers there has been a problem with the print button itself, so i don't know if that may be the case.

Thank You,

Mikey
ps let me know how you make out.

Posted on Apr 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix over heat error message?


www.sharpusa.com/CustomerSupport/ProductDownloads.aspx

Jun 11, 2015 | Sharp Copier Toner AR-5132 5125 AR-532NT1

2 Answers

Sharp Ar-5132 U6 code after moved the copier


U6 code indidcates a laser problem. It may have been shaken or bumped a little too much in the move.

Jul 28, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Error U3 on a Sharp AR-5132 Copier


The problem is on the mirror section on the scanner unit. It might be the motor, sensor, scanner wire or just need lubricating. I think you better call your local tech.

Apr 07, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Sharp AR-5132 blank copy


see comments, loose blade by roller, push in, fixed

Dec 24, 2008 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

AR-5132 Error code E7 13


CCD calibration error. Make sure the optics are clean in the machine in the scanner and free of dust.

Nov 03, 2008 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

Sharp Copier AR-5132


Generally F codes have to do with the finisher(used to be called a sorter). with the machine off, diconnect the finisher cord from the copier and power back on. This should allow you to test the copier. I'm not sure on this model how exactly the finisher cord comes out. but it should be self explanitory when you see it.

Oct 29, 2008 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Sharp AR-5132 has a U5 error code


Check and clean all the Sensor on the ADF!

Jul 07, 2008 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Ar-5132 sharp copier


H3-XX codes involve the fusing unit temperature being too low or too high.

Try resetting the error.

[C] – [INTERRUPT] – [0] – [INTERRUPT]
Type in 1 4
Hit [PRINT]
Turn power off then on if it doesn't do it automatically.
If error doesn't reset then you have other trouble
I hope you ran the developer setup and reset all of the parts counters for the items you replaced. Not setting the developer reference can cause a host of problems.
Sim 25-02 adjusts developer.
Sim 42 clears DV counter

Jun 05, 2008 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...