Question about Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Washer make a loud squeak when the spinning stops

Hi I have a Maytag Atlantis Washer MAV7200 AWW and it makes a loud squeak when the spinning stops.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Its the brake, just as long as it stops, dont worry about it, made a web page that has pics on how to replace the spin bearing on the maytag atlantis washer, after searching the net on how to, finding the manual, not explanatory, i decided to make this a simple 1 page web site, with lots of pictures, i hope this can help someone else in doing this job. since it would cost too much money for a repairman to do the job, better to buy a new one instead, i tackled the job. since it basically takes apart the whole machine, it might help others even if they dont have the spin bearing problem but other parts to replace,
http://www.geocities.com/maytagrepairwasher/

Posted on Apr 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Washer makes loud grinding noise during agitation and does not agitate - it is a maytag atlantis.... fix or replace?


I suspect the thrust bearing kit is bad. This comes with great instructions and is easily replaced. I would recommend changing this before replacing the machine. You are not out much if it does not work, but I am confident you will get it going by replacing this! This is a VERY common problem with these washers and the new kit has been redesigned.

Kelly

Mar 21, 2011 | Maytag Atlantis MAV9750A Top Load Washer

1 Answer

Make loud noise during spin cycle


Washer may be out of balance, Move closes around in washer and restart

Oct 24, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Atlantis MAV7200 doesnt drain at end of rinse goes to OFF


It sounds like it may be the lid switch. It may be as simple as adjusting or tightening. But ultimately it may need replacement.. Hope this helps

Apr 04, 2009 | Maytag Atlantis MAV7000

1 Answer

Maytag SAV 3652 AWW Washer: During spin cycle, burning smell occurred while making unusual noise. (For months, major squeaking during agitation).


Bad water pump. Replace water pump.tip machine back,Look under machine, remove belt, turn pump by hand, if not spinning freely replace pump.

Mar 23, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Re Your solution for my washer


its the spin brake making noise at the end of spin. once it gets humid out it will start all over again. its very comm. with this unit.

Apr 08, 2008 | Washing Machines

1 Answer

Washer make a loud squeak when the spinning stops


This is a very com. prob. with this unit. its is expensive to fix and will come right back when humid out best thing to do is just put up with it.

Apr 06, 2008 | Washing Machines

1 Answer

Dead mav6000


this is my experience repairing the maytag washer Atlantis mav series 9750 aww, I had to replace the spin bearing since it was making a jet engine noise when it was spinning out the water. its not an easy job for my 1st time taking this machine apart, you literally take it all apart to get to this bearing, but now I can show how to do it with pictures making it easier for you to do it. even if you have to replace something other than the spin bearing, this how to tutorial will show you how to get to most of the parts in this machine, parts are not that expensive, 50-80for bearing kit, here is my site on how to do it http://maytagwasherrepair.googlepages.com/index.html

Mar 09, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag MAV7200 Washer......needs seal and bearing kit


I HAD TO REPLACE THE SPIN BEARING ON MY MAYTAG ATLANTIS WASHER MAV9750,
it was making a loud noise during sin cycle, like a bad bearing would
make, jet engine kind of noise, i did replace the bearing and made a web
site with pictures on how to do it, since it almost takes all the parts
out, it will show you how to get to most of the parts in the machine, and
i also included links for downloading the repair manual, and parts at
appliance parts pros web site
http://maytagwasherrepair.googlepages.com/index.html

Feb 06, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Atlantis MAV7600 AWW


Normal brake sound in dry locations. Do you live in Arizona?

Feb 08, 2007 | Maytag LAT3600A Top Load Washer

2 Answers

Loud noise during spin cycle


this is my experience repairing the maytag washer Atlantis mav series 9750 aww, I had to replace the spin bearing since it was making a jet engine noise when it was spinning out the water. its not an easy job for my 1st time taking this machine apart, you literally take it all apart to get to this bearing, but now I can show how to do it with pictures making it easier for you to do it. even if you have to replace something other than the spin bearing, this how to tutorial will show you how to get to most of the parts in this machine
tutorial located here tutorial located here https://sites.google.com/site/maytagwasherrepair/maytag-washer-repair

Jan 02, 2007 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?
Maytag Atlantis MAV6451 Top Load Washer Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...