Question about 2wire HomePortal 1000HG DSL Modem and 802.11g Router1000-901101-000-IN (1000901101000IN)

2 Answers

Hg1000 home portal

Dear Sirs,

I have a hg1000 home portal and I am about to back up everything and reinstall windows. Please tell me the software connection address. I forgot it.

Thankyou, Arthur

Posted by on

  • wmhisaw Nov 10, 2008

    don't have the install cd or key code, verizon is my dsl provider

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 53 Answers

Do you mean the modem's ip address?
http://gateway.2wire.net
http://homeportal
http://homeportal/setup
http://192.168.1.254 (software version 3.7.x and higher)
http://172.16.0.1 (software version 3.5.x or earlier)

hope this is the one you're looking for...?

Posted on Apr 28, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Open Internet Explorer and in the address bar type “homeportal”. The homeportal will take you to the correct address.

Walta

Posted on Nov 07, 2008

  • Walta Nov 07, 2008

    PS the model number is 1000 HG not HG1000

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not find software to install


Hi there,
connect the Port 1 to your computer's LAN port.. Access the router by opening a web browser like firefox and enter on the address :

http://192.168.1.1

This is the default web address to access the router's portal.

hope this helps,

ps. your LAN settings should be set to automatic.

Dec 19, 2010 | Linksys Wireless-G Broadband Router

1 Answer

Every time I run the DSL-504 ADSL2 Ethernet Router CD disc to setup my internet connection, always get the dslultility.exe message say "modam not deteched....." but everything is...


To release and renew IP address, go to Start > Run. Type in CMD and press Enter. At the prompt, type in ipconfig and press Enter. This will display the adapter information such as IP address, Subnet mask, and default gateway.

To view additional information such as Mac address, DNS servers, etc, type in ipconfig /all.

To release IP address, type ipconfig /release.

To renew IP address, type ipconfig /renew.

If you are not able to get an IP address try setting one statically:

Windows 2000

Step 1 Right-click on My Network Places and select Properties.

Step 2 Right-click on the Local Area Connection which represents your network card and select Properties.

Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Enter your IP information for your network.

If connecting to a router, make sure the default gateway and a DNS server is the IP address of the router (192.168.0.1).

Windows XP

Step 4 Click on Start > Control Panel > Network and Internet Connections > Network connections.

Step 5 See Step 2 for Windows 2000 and continue from there.

Nov 06, 2010 | D-Link Computers & Internet

1 Answer

I have recently got a Belkin Router and got it all set up. I took it to my work to get some programs set upand when I returned home the Internet would not connect. I have since taken it back to work to see...


If you set up the router in your office it will not work at your home if you have different ISP. Basically, you need to reconfigure the router for it to work with your ISP at home. You may run the installation disc that came with the router to do the configuration.

Feb 24, 2010 | Belkin (F5D7231-4) Wireless Router

3 Answers

I can't access my netgear Modem I need web address


Hi

Do you mean you need the IP address on which you can access the router portal settings?

Try to enter 192.168.1.0, if you cannot still access into the router try to reset the router. You can find a small hole at the back of the router you may use a small pin like paper clip, press the button for 5 seconds.

Let me know here again.

Thanks

Feb 06, 2010 | NetGear DG834G Router

1 Answer

Ip configuration


Does your friend and yours IP settings the same?To clarify you would have 2 types of connection from your ISP.The 1st type of connection is that the authentication happens in the modem through the PPPOE UN/PW and the IP configurations are done in the modem and as such wont require to configure the IP settings when the windows is reinstalled.However the 2nd type of DSL service is that the IP settings are done in the windows and does not require any PPPOE username and password to authenticate.You would have to verify with your ISP which type of service you have and if you require any change order to make it the same way your friend has.

Please let me know any clarification you would require for this issue.

Apr 14, 2009 | Gateway Wireless-B Router (wbr-100)

1 Answer

2wire homeportal 1000hw cannot find wireless address


Windows 7 (Beta) and Windows Vista 64 Bit. Step 1. Do not allow the autostartup to run the installation application. You must right click on the CD ROM and select the "OPEN" option. Locate the driver on the install CD. Since my DVD ROM drive is my "D:" drive I located the driver at D:\USB_VISTA32364\BACKUP_2WIRE_VISTA_USB_Installer.exe . Before you click on this you want to right click on this and select Properties. In the properties tab click on the middle tab marked "Compatibility". Make sure you select the checkmark box to: Run this program in compatibility mode for: and use the pull down menu to select Windows XP SP2. This is how I was able to get my 2wire utility to work on Windows 7 (beta) 64 Bit.

Feb 07, 2009 | 2wire HomePortal 1000HW DSL Modem and...

1 Answer

Lost internet connection via cable modem-router-tower


Alright, start with the basic Gateway IP. http://192.168.0.1 That is what i use to access my router's (yeah, we run just a few more computers than normal people) Anyways, If that doesnt work, then the router has been changed beyond a normal spectrum of Ip configurations. Next step is to recontact Linksys and Let them know directly that the IP Address for accessing the router is not working. Meaning you have no Access to the router at all. Almost all routers use the same base access router ip setup. Its rare to find different unless you are like a few people, who find they need to run at least 2 or more routers on the same internet connection because of too many computers.

Otherwise, follow this link:
http://lifehacker.com/software/feature/special-how-to-access-a-home-server-behind-a-routerfirewall-127276.php

Oct 29, 2008 | Linksys Wireless-G Broadband Router

2 Answers

DWA 552 and 2WIRE HP1000


you dont have router protected (is not yours anymore).to gain control again, you can rest config. but you need your router manual nerby, to help you config. a previous internet provider config. and so on. to reset router config, you press a reset button on the back, until the lights is off/red. then config the router on the router website( writen on botton with default user and passw.(user: admin passw: admin or password) the wan config, Wlan,...
(Use a wpa2/wep encrption level on Wlan config.)

Note: change all router passw every 30 days, or less if necessary.

Jul 24, 2008 | 2wire HomePortal 100W (1000-400026-000)...

2 Answers

Home portal not yet activated


Hi,

XP is an very good OS which will connect with 2wire without any problem.

If your computer is not able to detect modem, pls follow these steps.

* Check for damage of ethernet cable
* Try to reset the modem by using a paper clip punching into the reset button
* Even if your modem is not detected, force the IP and Default gateway

Take care

Feb 26, 2008 | 2wire HomePortal 100W (1000-400026-000)...

1 Answer

Cannot access Internet thru router


Power off the following items: Power off the router wait for five minutes. You may have to reset the router. You shouuld have a reset button on the router some where. After resetting the router make sure you set your security settings. Have you tried uninstalling your firewall software and then reinstalling? I have worked on alot of machines that had problems with AOL and I like cable or dsl better. 1. Left click on start and choose the run option. 2. Type the folllowing text CMD and choose ok or enter key. 3. Now you should have a dos menu. 4. Type the following command line ipconfig/flushdns 5. Close everything out and trying connecting to the internet now. Good luck.

Aug 18, 2007 | NetGear DG834G Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

noti13

Level 1 Expert

15 Answers

William Dehn
William Dehn

Level 3 Expert

318 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...