Question about Samsung NeXus 25 MP3 Player

4 Answers

Screen reads FACTORY DIAG MODE

I'M TRYING TO CONNECT TO XM AND I GET A MESSAGE ON SCREEN FACTORY DIAG MODE

Posted by on

  • Gary G Jul 26, 2015

    Worked perfect. Thanks for the fix.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I had the "Factory Diag Mode" and was dismayed that I could not find a solution in any of my online searches. But I finally got it to work with only a minor side-effect, so I thought I'd share.

I originally tried the following from the "Live XM" mode:
Go settings, setup, restore defaults, restore setting only.

That didn't seem do anything for me. Then I tried the same thing from the "My Music" mode.
That fixed it!!!
The only thing that I noticed that I lost was my channel favorites (hardly a worry at all). All of my saved songs and playlists are still there!!!

Hopefully this will help a poor soul in need

Posted on Aug 23, 2008

  • Tracy Nov 10, 2012

    Thank you!!! I tried to do it from live xm mode too, and it failed, but this worked. Thank you, thank you! I was all ready to buy a new radio. :)

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Go settings, setup, restore defaults, restore setting only. Then let it sit connected to the antenna. Mine came back after a few minutes.

Posted on Apr 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thank You Thank You MrXindeed!!!! I did exactly what you said about going to music and resorting settings. All fixed!!!
-A

Posted on Oct 02, 2009

That worked... thanks for posting this!!! you saved me 80 bucks

Posted on Oct 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Factory xm no sound


You have to make sure that your plan wiith XM hasn't expired and also find out from XM if your software from them is current in your radio.

May 31, 2014 | 2008 Cadillac Escalade Esv

Tip

SERVICE MODE AND POWER FL PANEL CIRCUIT


1. Main Functions
• Diag
Performs unit test of devices installed on the board.
• Display Error Log
Error log is displayed. Displayed contents can also be saved in an USB memory device.
• Factory Initialize
Restores the unit to its factory settings.
• Network
Checks the wired network connection.
• Version Up Not used.
• System Information
Displays the system information of the unit.
Displays information such as the software version, drive information, etc.
• EMC Test Mode Not used.
• Drive
Write drive OP data and check drive.
2. Menu Tree
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1] Moves to Diag screen
[2] Moves to Log screen
[3] Moves to Factory Initialize screen
[4] Moves to Network screen
[5] Moves to Version Up (DISC version update) screen (Not used)
[6] Moves to System Information screen
[7] Moves to EMC test mode screen (Not used)
[8] Moves to Drive screen
[9] Moves to HDD mode (Not used)
[UP]/[DOWN] Moves the cursor [ ENTER] Moves to the screen of the item selected with the cursor.
FOR MORE CHECK THE LINK ...
Electronics Equipment Repair Center

on Feb 14, 2015 | Sony Televison & Video

1 Answer

Xm radio not working


no year, stated., so no real help.
get it serviced.
or check all fuses and connections to it, then get it serviced
the magic xm is busted.

Apr 07, 2014 | Suzuki SX4 Cars & Trucks

2 Answers

When my receiver is plugged into my boom box, I get a display reading "check cradle for power"


It's not receiving enough power from the boombox so the voltage drops too low for the receiver to function properly. Check the cradle connector for bent or pressed pins and the power source of the box for proper functioning: measure the voltage it delivers and the status of its components, especially the filtering capacitors.

Jul 04, 2011 | Delphi Roady XT XM Radio Receiver

1 Answer

Cant get xm weather on garmin 740s


To receive XM weather or audio, the GPSMAP 740s requires a GXM 40 Smart Antenna with XM subscription.

The GXM 40 Smart Antenna (010-00730-00) is used to receive weather and audio service from XM satellite radio. For details on XM services please visit our XM webpage.

Once a GXM 40 Smart Antenna has been connected to the GPSMAP 640, the device can display the subscription information for the antenna.

From the Home Page in Boating mode:

  1. Select Configure
  2. Select System
  3. Select System Information
  4. Choose Weather Subscription

From the Home Page in Driving mode:

  1. Select Tools
  2. Select XM Services
  3. Select XM Radio
  4. Set the channel selector to channel 0
  5. Select Radio ID

The subscription information will now be displayed on the screen.

Mar 26, 2011 | Garmin Gxm 51 Weather And Audio Xm...

1 Answer

Need to know how to reset the oki c5400n to factory defaults


Procedure:
  1. Power ON printer while holding both the "+" and "-" buttons until “OKIUSER” message apear in LCD.
  2. Press ""+ or "–" button until “ENGINE DIAG MODE” is displayed
  3. Press "ENTER", will be displayed "DIAGNOSTIC MODE XX.XX.XX S-MODE"
  4. Press "+" or "–" button until “NV-RAM INITIAL” is displayed
  5. Press "ENTER" again
  6. Appear "TABLE 1" message
  7. Press "ENTER" until "EXECUTING RESET" message appears. "NV-RAM INITIAL" message will BLINK... IT resets TONER, DRUM, FUSER and BELT...
  8. Power OFF printer, wait 10 sec, and power ON again

To access Service Mode in C9300:
  • Power ON printer with 0, 1, 6, 7 at same time...

Nov 09, 2009 | OKI C5400 Laser Printer

1 Answer

Reset drum life on oki c5500n


try this:

1) Power on printer while holding both the + & - buttons simultaneously; release when "Okiuser" is displayed.
2) Press + or - until "Engine Diag" Mode is displayed; press Enter and Diagnostic Mode xx.xx.xx will be displayed
3) Press and hold both Enter & On-line simultaneously until Eng Diag Level3 is displayed

4) Press + or - until Local Parameter Set is displayed; release and press Enter

5) Press + or - until it displays Factory Mode; if it displays Factory Mode Twice with an asterisk next to one then it is in Factory Mode; Press Enter, Press + or - until it displays Factory Mode & Shipping Mode on the display; then press and hold On-line & Cancel simultaneously; when it stops blinking an asterisk should be displayed next to Shipping Mode, which becomes the default mode.

6) Power printer off then on to complete the procedure.

Oct 12, 2009 | OKI C5500n Printer

1 Answer

OKI image drum issue


Try this:

1) Power on printer while holding both the + & - buttons simultaneously; release when "Okiuser" is displayed.
2) Press + or - until "Engine Diag" Mode is displayed; press Enter and Diagnostic Mode xx.xx.xx will be displayed

3) Press and hold both Enter & On-line simultaneously until Eng Diag Level3 is displayed

4) Press + or - until Local Parameter Set is displayed; release and press Enter

5) Press + or - until it displays Factory Mode; if it displays Factory Mode Twice with an asterisk next to one then it is in Factory Mode; Press Enter, Press + or - until it displays Factory Mode & Shipping Mode on the display; then press and hold On-line & Cancel simultaneously; when it stops blinking an asterisk should be displayed next to Shipping Mode, which becomes the default mode.

6) Power printer off then on to complete the procedure.

Jul 22, 2009 | OKI C5200n Laser Printer

6 Answers

My delphi xm is frozen


My radio was stuck on "scanning media" and the regular reset (volume up and Mode) did not work.
Nothing that I did, fixed it...
I called Delphi and they said...
(1) Put radio in it's cradle, press Volume UP/Mode buttons for 3 seconds until it resets.
(2)Then when the "scanning media" message appears press up arrow, down arrow, up arrow.

My delphi screen unlocked. I LOST everything that I had recorded, but that was fine with me.

I had to update the firmware and everything is working fine.

Losing all my recorded songs was much better than having to send in my radio!

Hopefully this will work for you!
Delphi was extremely helpful and very nice so don't be afraid to call them if this doesn't work!

Jul 10, 2008 | Delphi SKYFi3 XM Radio Receiver

Not finding what you are looking for?
Samsung NeXus 25 MP3 Player Logo

Related Topics:

956 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...