Question about Projection Televisions

4 Answers

Have a euro vox satellite box,is not working says its searching for codes

Posted by on

  • 11 more comments 
  • tanyapants Apr 08, 2008

    have a eurovox code is not working.. says its updating code!

  • technobar Apr 09, 2008

    just says cde updating

  • Anonymous Apr 09, 2008

    just says please wait code being updated

  • karamabbas Apr 09, 2008

    Hi



    Since last night my box says please wait, code being updated and it's just stuck on this.



    This has happened in the past but within a couple of minutes the box started working again. This time nothing is happening. Can some suggest something please.



    I have tried scanning the channels, turning off and then on but no joy.

  • bricee Apr 09, 2008

    My problem is the same can anybody give a fix

  • LDM2008 Apr 09, 2008

    I also have a problem with my eurovox, only getting a few free view channels all others saying please wait updating code.. Please someone help us im missing the good channels. CAN ANYBODY HELP????

  • Denise Gunshorn
    Denise Gunshorn Apr 09, 2008

    same problem with me< i have tried updating the box, still it says please wait updating codes..I have been told the cable company have the codes for these boxes and sent a signal down the line!!!! but i was under the impression this could not be done so who knows..I just know my old man will not be happy when he cant watch the footy tonight...can any one help

  • scotty1boy Apr 09, 2008

    Hi

    Having exact same problem in Lanarkshire and tried same as others.

    somebody out there must know a fix.

  • sr3101 Apr 09, 2008

    Same problem is dundee. No man utd v roma in this house. Anybody any ideas yet?

  • ting tong Apr 09, 2008

    same problem manchester area.power scaned channels.turned it off and on unplugged it.still same (nothing) but if youve got the box there still on apparently

  • Anonymous Apr 15, 2008

    my box is not updating it is 2007 euro vox red type

  • shaun yan Apr 18, 2008

    got to put the codes in every day is there one were they just roll

  • carrollkate Mar 16, 2009

    need codes for 16th march

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Go on afterdawn.com all the codes are on there

Posted on Apr 10, 2008

×

Hey peeps i had the same problem in bradford, jus got my box flashed and voila! everythings working again and i dont have to manually update the codes everyday either.

Posted on Jul 05, 2008

Hej pliz code for thebox aj nad pliz

Posted on May 27, 2008

Hey same issue in west sussex, called a mate in london too and he has the same problem...please wait updating codes, any ideas? just missed the footy damn!!

Posted on Apr 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost my remote, now i cant turn tv on


  • Keep in mind, there is a power button front of set also. But, if you want to use a remote, go to remote central.com and they should be able to get you the factory remote.
  • If you are using cable box or satellite box, you should be able to use that remote for powering on the set.
  • In the back of the cable box or satellite box there will be codes to enter in the remote for that set to work with the remote. Give that a try and let me know how things turn out.... Good luck and let me know if you have any more questions or need more in depth knowledge for this repair... Have a great day...HDTV GURU JAY

Apr 06, 2011 | Mitsubishi VS-60609 60" Rear Projection...

1 Answer

Need codes for euro vox for 16th march


try downloading from http://thepiratebay.org/torrent/4543392/eurovox_max_v_codes
new codes for eurovox max v. code valid after code roll 29/11/08

its a free torrant site easy to use.

Mar 16, 2009 | Apex Digital Projection Televisions

1 Answer

Need code to program remote to work with Direct TV brand box.


I have the codes you need to set direct handunit for your TV.11145-10145-11960-11904-11445-11345-11045-10797-10583-10577-10413-10409-10279-10227-10173-10151-10097-10095-10056 10038-10032-10016-10105 Switch slide mode to TV make sure tv is on now press and hol MUTE&Select together untill it flashes green now enter code then press power if set turns off that will be your code if not repeat steps untill TV powers OFF.

Jan 10, 2009 | Hitachi 51UWX20B 51" Rear Projection...

1 Answer

HDMI interface issues


If you swapped directv receivers and the problem followed to a different tv then there is something wrong with the directv receiver. Need to run satellite setup again on this receiver to fix. repeat satellite setup is accessible through the setup submenu by pressing menu from the directv remote. look under satellite submenu once in setup

Dec 23, 2008 | JVC HD-52Z575 52" Rear Projection...

2 Answers

Need codes for the euro vox maxv on ntl north east


HOW TO ENTER KEYS ON A EUROVOX RECEIVER:
PRESS MENU - THEN PRESS THE YELLOW TEXT BUTTON (BOTTOM RIGHT).
THE PROVIDER FOR YOUR AREA IS EITHER EX C&W UK (5C 01), PURE NTL UK (54 01) OR TELEWEST UK (5A 01) THE PROVIDER ID NEEDS TO BE CHANGED:
E.G. IF YOU ARE IN EX C&W UK CHANGE THE VALUE FROM "00 00" TO "5C 01"
E.G. IF YOU ARE IN PURE NTL UK CHANGE THE VALUE FROM "00 00" TO "54 01"
E.G. IF YOU ARE IN TELEWEST UK CHANGE THE VALUE FROM "00 00" TO "5A 01"


ENTER THE KEYS FOR YOUR AREA AS SHOWN IN THE KEYMASTER SOFTWARE & PRESS THE OK BUTTON TO SAVE. THIS WILL BRING THE CHANNELS BACK TEMPORARILY WHILST A NEW SOFTWARE IS BEING RELEASED.

IF YOU ARE UNSURE WHAT AREA YOU ARE IN, JUST ENTER ALL 3 SETS OF KEYS ONE BY ONE. THIS IS A GOOD LEARNING EXPERIENCE FOR YOU ALL.

BEST WISHES - WE WILL CONTACT YOU AGAIN WHEN WE HAVE SOFTWARE UPDATES AVAILABLE



LATEST KEYS ALL AREAS
=====================

EX C&W KEYS -- KEYROLL 28/11/2008
-----------

PROVIDER CODE: 5C 01

KEY 00 = 85 AF 58 1A 36 96 B6 C9

KEY 01 = 2A E0 72 B0 9E 07 9B 5D



TELEWEST KEYS -- KEYROLL 28/11/2008
-------------

PROVIDER CODE: 5A 01

KEY 00 = 04 4D 6F 7D D5 C9 F7 9B

KEY 01 = D2 EA 29 B7 B5 52 E9 AD


PURE NTL KEYS (UK) -- KEYROLL 28/11/2008
------------------

PROVIDER CODE: 54 01

KEY 00 = 31 6F CB 3F 2E 45 5A 04

KEY 01 = EA B7 BF B2 D5 AA 46 AB

Nov 29, 2008 | Projection Televisions

5 Answers

I am trying to find a universal remote code to control the new Zenith digital tv tuner converter box. The model # is DTT900. It is for a person with low vision who cannot see the buttons on the remote...


Hi,

Pls post back with the brand and model of the universal (replacement) Remote Control or what remote control you would want to use with the Zenith DTT900 Digital-to-Analog Converter Box.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Oct 23, 2008 | Projection Televisions

1 Answer

I have an RCA universal remote and I need a code for a Bell ExpressVu satellite in order to use the remote for both my TV and Satellite.


004 was the only code I could find for Bell but i do not think it will work. Therefore, i recommend the following:
Programming a Device using Code Search:


  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Jun 26, 2008 | Projection Televisions

1 Answer

Have a olevia t v lost channle #3 went threw set up and channle search also tried to add channle #3. tunner channle only will pick up channles 26 32 44 56 60


You could try bypassing the tuner and use the rca inputs if you have satellite or cable box that works this way. Hope this helps

Mar 16, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...