Question about Digital Cameras

1 Answer

Camera problem My screen is jammed on my Panasonic LUMIX digital camera, DMC-FX01 and I can't scroll through past photos or take new ones. I look forward to your advice

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Lumix DMC-TZ1 and my camera is having simular problems. The camera turns on but the buttons don't work. I can not zoom or take pictures. I can turn the auto stabilizing on and can change photo modes by turning the nob. But the menu button, nav buttons are not doing anything. The screen goes on and everything. I have tried removing the battery and nothing happens.

Posted on Jun 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic DMC FX01 with new battery still won't turn on?


If your panasonic camera uses a panasonic battery and you try to use a different brand equivalent battery, some panasonics will not work. Could that be your problem?

Nov 11, 2011 | Panasonic Lumix DMC-FX01 Digital Camera

1 Answer

Camera is locked open. battery is fully charged. camera is a panasonic lumix DMC-FX01


believe it or not, take your camera and wack it into your open hand, with the screen side. Remove first all rings on your hand or you might loose your screen. If this does not work your camera for all practical purposes is toast, too expensive to get repaired. Sell it on ebay with: "screen not craked" and buy a replacement: 230505313571. I also love this camera and they often come up on ebay for <$50.

Jun 03, 2010 | Panasonic Lumix DMC-FX01 Digital Camera

1 Answer

Mr COX


try checking with uninstalling the cd software,, .. and make sure you were installing right drivers.. updated ones

Nov 10, 2009 | Panasonic Lumix DMC-FX01 Digital Camera

1 Answer

Lost Lumix simple viewer C D for Panasonic Camera DMC FX01


If you are looking for drivers in that CD, click Panasonic Support and check drivers list of DMC-FX01 at bottom of page.
and if you need Software CD, please contact nearest Panasonic service center.

May 15, 2009 | Panasonic Lumix DMC-FX01 Digital Camera

1 Answer

The lcd of my Panasonic Lumix DMC-FX01 became grey when i was taking photos. There is no problem with the photos though. The camera works without any problem. The problem is that the lcd is grey and i...


pls try to reset the camera to factory settings

performa a software reset via the menu's using the settings on the 'play' setting on the dial

if it doesnt help then

u can buy screen here and get it fixed or u can fix it is a jack mechanism inside the camera no soldering work it is not that much technical inside these devices all things are with jacks and flex cables and grips so u can do it see the link below for replacement screen from ebay and u go repair it if u go to a repair shop or panasonic they will charge u 200 $ for a 200 $ camera so dont attempt it PLS RATE ME FIXYA for help and one thing more u can check the flex cable and the connector of lcd to board may be it has some condesation and re seating might help bcoz ur LCD is not damaged as u told me no impact not broken so it might be a faulty flex cable

http://cgi.ebay.com/PANASONIC-LUMIX-DMC-FX01-FX1-LCD-DISPLAY-REPLACEMENT_W0QQitemZ220371657188QQcmdZViewItemQQimsxZ20090304?IMSfp=TL090304123003r38786

pls dont forget to rate me FIXYA

Mar 20, 2009 | Panasonic Lumix DMC-FX01 Digital Camera

1 Answer

Panasonic lumix dmc-fx01


If the dark spot is not focused, it could be on the sensor. Otherwise, check the lens for any dust particles. If you can't find any dust, take the camera to an authorized service center.

Aug 20, 2008 | Panasonic Lumix DMC-FX01 Digital Camera

1 Answer

No Installation CD


Apparently there is a letter after your camera model number. I don't know if thats going to help find the driver for the camera since drivers that are available are very few for digital cameras on their website. There are a few options. You could purchase a new disk from the service center if there available or you could get a memory card reader for your camera. If you need some photo software, Adobe and Kodak has some available for free to download from their website.

Jun 26, 2008 | Panasonic Lumix DMC-FX01 Digital Camera

1 Answer

I broke the lcd of the camera


There is a guy in South Carolina who has lots of used parts for all the Panasonic Cameras at reasonable prices. I bought the LCD for mine and it works like new. I think his email is gerald.ray@aa-ark.com

Nov 22, 2007 | Panasonic Lumix DMC-FX01 Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Cameras Experts

kakima

Level 3 Expert

96333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...