Question about Televison & Video
If you do not have a code for method one or two you can try a automatic scan. This will scan for every possible
code that the device will have.
1 – Turn on the device you want the remote to control. If you are using a VHS or DVD player please make
sure that it is playing a dvd/video before you start.
2 – Press and hold the DEVICE key you wish to program for 3 seconds. The LED will light up upon
Key press and will go off ater3 seconds ,now release the button.
3 – Press and release the PLAY button and the code search will begin. The LED flashes every one second
when a code has been successfully sent.
4 – When your device turns off, press and release the pause button on your URC, the LED will
remain on once pressed.
5 –In order to now turn your device back on press the CH – button on your URC, if it does not respond
then continually press the CH – button in 2 second intervals until your device switches back on.
6 – Once your URC is successfully controlling the device, press and release the EXIT button on your
URC, the LED will flash quickly four times and then go off.
Hope this helps.
Posted on Apr 06, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 13, 2016 | Sanyo 42 in. LCD TV
Oct 12, 2012 | GPS
Jun 14, 2011 | One For All URC-3605 Remote Control
May 23, 2010 | One For All URC-3021 Remote Control
Sep 29, 2009 | One For All URC-5705 Remote Control
Jun 28, 2009 | Universal Remote Control
Dec 04, 2008 | Televison & Video
119 people viewed this question
Usually answered in minutes!