An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: 0000 code doesnt work for me
If your using a Motorola cell phone than the 0000 should work. If your cell phone is from a different Mfg, it will not function with 0000. You can try 9999 but that's a guess. List your phone model No# here.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Depending on the phone... try and
remove the currentbluetooth device. Close the
headset. Go to the phone and choose discover, or search. Open theheadsetand press
and hold the big button. It should then turn purple and should be recognized.
Also make sure thebatteryon the
headset is charged before doing this.
If this doesntwork: Start the search on
the phone, Keep the boom of the mic closed when you press and hold the button
on the h700. the light should turn purple. After this, open the boom
If it asks for a passkey, it will be 0000, four zeros. This is the default passkey for the Moto H700.
yeah hedenram is right. my problem was that i was trying to pair something WITHOUT the headset in pairing mode. just switching it on doesnt put the headset in pairing mode and it will reject the 0000 passkey even if this is correct. it is vital when you turn on you hold the power button til it flashes red/green and then it will be in pairing mode and accept the 0000. the only way i found this was in the instruction booklet which i thought i had chucked away
1.Ensure the headset is turned off (indicator light not blinking and headset boom is closed) 2.Press and hold the Call button. After about 4 or 5 seconds, the indicator ight becomes steadily lit in magenta 3.Release the Call button and immediately open the headset boom. The indicator light remains lit in magenta.
If the indicator light is flashing in blue or not steadily lit when opening the headset boom, repeat steps 1 through 3
set up your phone to search for BT devices, press and hold the phone button on your Skywing or H700, once the purple light comes on open the boom. Your phone should see the device. When prompted for a passcode enter 4 zeros, if that doesn't work, try 5 zeros, if still no luck try 1234 and 12345