Need new band and case for dive wk1320. where to b...

You can take any leather band but the wide must be 22mm. I´ve a diving band from casio watches since 4 Jears. It´s still ok.

mcdevito75 here, Best Bet, you may need a special tool to remove and replace the SPRING BARS (PINS) that hold the band onto the watch, then you may even need new spring Bars, (pins) to re-attach the band to rthe watch. BEST BET, look for a small watch repair shop in your area to change the band.

mcdevito75 here, Ebay is a great place for your watch band, but you should know the watch band size in MM, or you can look for a small watch repair shop in your area.

Hi,

If your watch is older than 4 years you can't buy links unless you get real lucky and find a watchmaker that happens to have some on hand.

Swatch sold Tag Heuer about 4 years ago to Louis Vitton. LVMH did not purchase the parts for watches made prior to the sale of the company. So all those parts are no longer available.

If your watch is less than 4 years old you can contact Tag Heuer directly for the links.

Hope this helps,

Ken
www.yellowstonewatch.com

Invicta Service Center:

http://www.invictawatch.com/support_files/service_center/ServiceCenter.htm

Try parsecent.com they can get the part or a substitute part, the keeper is not sold separately tho, you would have to buy a complete band...good luck :)

that part is called a Keeper and not easily available ...the company that manufactures the bands does not sell it separately so you would have to buy the complete band to get it...or you could try to find somewhere that would sell you a clean used one...good luck

You do noy need an exact Anne Klein band as all watch bands are made to specific measurements.
You have to measure the width of the band (the end attached to the watch) and buy any type of band you like, just make sure it is exactly the same width as the previous band. In case if you have the Anne Klein clasp or buckle, you have to measure the other end of the band as well and by any band you like, but in this case you need to match both ends of the band. Clasp or buckle are easily refitted to the new band and nobody knows that this is not an original one.
Do not forget to rate, please.

You have two options and for both you need to find yewellery repair shop.
Option1) Some jewellers sell NOS (New Old Stock) gold watch bands. If your vallet is thick enough for this option- shop around and buy one.
Same jewellery repair shop will be able replace the old band with the new one, even if the band is soldered to watch case.
Option2) In the same shop ask if they can built up (lengthen) the clasp. In this case you will spend less money, but you will loose on looks.
Note: As mostly all gold watch bands are maschine made, it is allmost impossible to repair or lengthen them in a good looking way. Anyway- consult the jeweller first and see what he says. He may have some NOS witch is exactly matching your old watch band pattern.
Good luck.