Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

CLOTHES STILL SOAKED AFTER SPIN CYCLE

When The spin cycle starts it sounds like the motor is getting bogged down and it wont spin fast at all.

Posted by on

  • Anonymous Apr 06, 2008

    i have a maytag top load washer mav2755 it spins all the water out of the tub but the clothes still have water in them it is only 3 years old

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This is my experience repairing the maytag washer Atlantis mav series 9750 aww, I had to replace the spin bearing since it was making a jet engine noise when it was spinning out the water. its not an easy job for my 1st time taking this machine apart, you literally take it all apart to get to this bearing, but now I can show how to do it with pictures making it easier for you to do it. even if you have to replace something other than the spin bearing, this how to tutorial will show you how to get to most of the parts in this machine, parts are not that expensive, 50-80for bearing kit, here is my site on how to do it http://maytagwasherrepair.googlepages.com/index.html

Posted on Apr 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Doesn't dry clothes in spin cycle- spins but not enough


so it is the spin cycle that does not work that is the drum does not turn. Have you tried other levels such as delicate wash and see if spin works. LASTLY, disconnect power and reconnect.

Mar 03, 2014 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Soaking wet clothes after spin cycle


Check and choose a longer spin cycle and see if the fault changes. If so the SPIN cycle is too less or there is less action or speed in the cycle, check the motor speed, check the capacitor to the motor, the spindle friction - if so reset the spindle and drive.

Jan 17, 2013 | Washing Machines

1 Answer

Even after doing the spin only cycle, my clothes


Is drum spinning on spin, check belt tension if not. if this is ok then it could be problem with motor brushes, or if it is induction motor it could be a capasitor

Feb 08, 2010 | Washing Machines

1 Answer

Clothes are clean but soaked. Very slow spin


Clean out the drain pump AND connecting hoses.

Aug 30, 2009 | GE Washing Machines

2 Answers

Washer will fill fill with water but doesn't start wash cycle


it will fill but won,t spin, will throw out water as if it washed, then it take water to rinse but won,t spin ,then will throw out water as if it did , but clothes are soaked

Feb 21, 2009 | Roper RAS8445KQ Top Load Washer

2 Answers

Clothes still wet at end of spin cycle


i would check your belt.the added stress of a full tub longer with water may have done it in.part#wh1x2026 God bless,tom

Jan 10, 2009 | GE WBSR3140DW Top Load Washer

1 Answer

Kenmore spin cycle issues


Does it agitate and spin at the same time? the motor has a pump on one side and gear case on the other. if the gear case is seizing then the pump is lagging because the motor is loaded from a seizing gearcase and the gear case needs to be replaced.

Aug 24, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...