Question about Kenwood KDC-MP332 CD Player

Open Question

Kenwood KDC-MP332 No Aux Menu?

I'm having trouble with my AUX input for my 80 gig iPod video. The CD player states that it is ipod ready, I hooked the Ipod into the AUX cable but an AUX menu isn't showing up. I tried to look at other similar kenwood player and some users needed to turn the AUX on, but I didn't find it within the menu.

Posted by on

  • Anonymous Jan 14, 2009

    hey there. did you find it out? i have the same problem and dont get it. i dont have my instruction paper anymore cause once i fixed it. but i forgot how. please help

  • Anonymous Apr 12, 2009

    Did you ever find out how to hook up an Ipod to this unit? I have an Ipod Toutch and I cant see in the instructions how to hook it up?

    Thanks

×

5 Suggested Answers

JeffOC
  • 30 Answers

SOURCE: aux in kenwood kdc 135

Read in the back of the manual in troubleshooting. It's the first FAQ there.

Posted on May 14, 2008

tech48
  • 624 Answers

SOURCE: aux location

There is a RCA cable that comes off the back of the radio and also another cable for 3.5mm (mini-stereo jack) that also comes off the back of the radio. The RCA jacks can be used for "AUX" or "Sub-woofer" and the 3.5mm jack is just for "AUX". Your ipod can use the audio output jack or the headphone jack and plug that into the 3.5 mm jack on the back of the radio. You will need a "3.5mm male" to "3.5mm male" stereo cord that can be purchased at Radio Shack or Best Buy. Then you select "AUX" on the display with the source button to listen to it. You may need to go into the menu and activate the "AUX" input. Check your owners manual for details.

Posted on Aug 13, 2008

  • 1 Answer

SOURCE: turn aux on on kenwood kdc-mp205

In order to access the AUX option the stereo needs to be in Standby mode. To do this just hit the SRC or source button until you reach the Standby option. Now hit the menu button and scroll up or down until you reach the AUX on/off option and just turn it on. Hope you find this helpful.

Posted on Oct 28, 2008

partyd
  • 141 Answers

SOURCE: I have my Kenwood CA-C2AX audio cable plugged into

you have to go into the radio menu and turn off the cd changer port, keep scrolling auntil you find the aux input turn it on
and the audio input will woork
good luck

Posted on Apr 01, 2010

  • 1 Answer

SOURCE: Kenwood Kdc-mp425 will not switch to Aux.

Apparently, this auxiliary input only works for a Kenwood CD changer or a sirius radio connection. At least that is my conclusion after finding the same problem. Let me know if you figured anything out on this.

Posted on Sep 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

How do I hook up my ipod to my pioneer vsx d409 ?


The best way is to use a 3,5mm stereo jack to 2 RCA cable like this:
technical114_34.jpg
You can easily find one like this at your local audio/electronics shop or buy one on line. You have to connect the RCA at any free stereo input at the back of your Pioneer (like aux or cd). Take a look at this picture:
technical114_35.jpg
After this you can use the 3.5mm stereo jack for connecting not only your ipod but every mp3 player or other device has an earphone jack. Just plug the 3.5mm jack at the earphone jack and rise the volume at the portable device up to the middle of the volume range and set your Pioneer input selector at the stereo input that you connect the 2 RCA before (aux or cd)

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Mar 13, 2011 | Pioneer VSX-D409

1 Answer

HOW DO I HOOK UP AN IPOD TO A CD MIX2 , i hooked it into the aux on the back, i didnt get no sound evevrything was hooked up ,


You would need a Stereo jack to RCA cable. Input into Aux channel in rear, make sure your switch on faceplate is set to Aux. You may also need to turn up volume on the ipod.

Dec 07, 2009 | Nu Mark Numark CD-Mix-2 Dual CD...

2 Answers

How do i hook up a ipod to the cd player


Go here:
http://www.crutchfield.com/S-j3EX2WZGpxL/p_113MP232/Kenwood-KDC-MP232.html?tab=features_and_specs
You can download the manual and specifications.

Oct 06, 2009 | Kenwood KDC-MP232 CD Player

1 Answer

Jensen vw9312 wont play ipod video


This unit does not have iPod video capabilities only audio, If you want to view video from your iPod you can get a universal cable that would charge it and also give you a audio and video output, this cable needs to be powered and grounded and hooked up to one of the radio audio video inputs. This link will take you to it. http://cgi.ebay.com/ALPINE-JVC-PIONEER-SONY-Aux-Input-Cable-for-IPOD-VIDEO_W0QQitemZ370164615429QQcmdZViewItemQQptZOther_MP3_Player_Accessories?hash=item562f87c905&_trksid=p3286.c0.m14&_trkparms=66:3|65:15|39:1|240:1318|301:1|293:1|294:100

May 15, 2009 | Jensen's VM9312 Car DVD Player

1 Answer

Pionner cd-iu200v plays video from Iphone, no picture on avh4100


Check the initial settings menu (you will probably have to reset the system to get it to reappear) and set the aux 1 to IPOD. This will let the ipod video play via the aux 1 just like it is supposed to. This solution is buried in the manual but is really hard to pull together.

May 11, 2009 | Pioneer AVH-5700DVD DVD AV HEADUNIT...

1 Answer

IPOD ADAPTOR


you have to buy the ipod connection kit to pioneer, but if your deck have RCA input at the back..all you need is Y cable 2 (RCA male - 35mm jack)

RCA will be connected to DECK, 35 mm jack to your ipod.

to use your ipod...change the input setting on your deck to AUX (auxillary) most deck have this for CD Changer connection

Good Luck

Mar 13, 2009 | Pioneer DEH-P6700MP CD Player

1 Answer

Jensen VM 9311 iPod Classic


The new ipod will not work with anything other than 2008 alpine products. Apple embedded a chip in the actual cable that tells the ipod that it's ok to pay. What you need is an authentic apple video cable that can only be purchased at the apple store...then hook the inputs up to the video input on the radio.

Mar 28, 2008 | Jensen's VM9312 Car DVD Player

1 Answer

Hooking up ipod


THe easiest way to hook an iPod or any other personal audio player to almost any audio receiver is to pick up a cable having a stereo miniplug (like the plug on your earbuds) on one end, and two RCA plugs on the other end. You should be able to get this cable from almost any electronics or discount store for under $10. The miniplug goes in the iPod's earphone jack, and the RCA plugs connect to an unused input on your receiver. Inputs marked "AUX" or "CD" are a good choice, or even a "TAPE" input. Set the iPod to about 3/4ths volume and adjust the receivers controls for desired volume.

Feb 14, 2008 | Denon AVR-485 Receiver

1 Answer

Ipod hookup


I believe that you are lucky since the "P" in the model number of the deck indicates and extra input source on the rear of your deck. This is used right now by your changer. You need to replace the changer with the Ipod and you are done. Stereo mini to dual rca's and you are done.

Sep 26, 2007 | Pioneer DEH-P5200 CD Player

Not finding what you are looking for?
Kenwood KDC-MP332 CD Player Logo

Related Topics:

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6992 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...