Question about Ricoh Aficio 450 Copier

3 Answers

The copier is a Ricoh Afcio 350


Do you have a solution to a Ricoh Afcio 350 error code 326-00 problem. If so can you e-mail it to Morgan2645@aol.com

Thank - You,

Morgan

Posted by on

  • 1 more comment 
  • chris_pontia Jan 22, 2009

    Spinal,

    I continue to get this error also. If I power off the machine, the error code comes back on. What would be the long term fix? Is it expensive?

    Thanks

  • Anonymous Jan 29, 2009

    Hi,

    Any help please? I got the same functional error SC360-00 for my Aficio 350e. Tried the power on/off but the error came back.

    Brando


  • bggsing May 11, 2010

    Hi help needed from experts out there,

    My Aficio 350e's laser unit is defective and have tried replacing it with a 450 laser uinit. Before replacement it does not copy. After replacement it seems to be working now (copying) but my problem is that the width of the copy is reduced by 50%. The length is ok. Is the laser unit of the 450 compatible with my 350e machine?

    pls help,

    Brando


×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 162 Answers

The laser unit of 450 is not compatible with 350, It is going to copy but the copy will be deformed.

Posted on Sep 22, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 86 Answers

SC 326: Laser synchronization detector board cannot receive the laser beam.
Replace the laser sync detector, Part No. A2935310.
Or try the following solution;
Open the front cover and remove the brown inner cover - 2 screws.
The black unit after the inner cover is the laser unit. There are 2 screws securing the laser unit - loosen them.
Tighten the right securing screw while jacking up the right side of the laser unit with a screwdriver.
Tighten the left securing screw and put the inner cover back on.
If SC 326 is still indicated after the above procedure, replace the laser sync detector or the whole laser unit.

Good luck and please rate me, thanks.

Posted on Jan 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ricoh Expert
  • 287 Answers

Hello Morgan,
Your copier has two lasers that are used to write the image of the document you wish to reproduce. The second laser is used for higher definition(DPI) for example a high quality print job. A single laser is for your run of the mill copy stuff. E- 326 means there was error regarding the function of the second laser. Theoretically, the simple function of making a copy should still be available to you once you have reset the error code. You can do this by powering off the copier using the switch located at your left knee, or if in doubt, unplug the copier for a moment. Here are the nuts and bolts of the problem. There is obviously a problem with the laser unit unless it was a fluke.

Posted on Apr 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ricoh mpc 350 error school 972 what is the resion Ricoh mpc 3001 error code sc 972 how I can fixed it


If you wish to get some details about printer repair and service; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

May 31, 2016 | Ricoh Printers & Copiers

1 Answer

Error code sc200 on a ricoh afcio mp c1500


Turn Machine off then on.

If it doesnt work press on keypad [*107 Clear] then press System SP. then turn Off the On.

Mar 29, 2014 | Ricoh Aficio 1035 Copier

1 Answer

Error code sc200 on a ricoh afcio mp c1500


Contact Service Center if it's still in Warranty, otherwise Contact any Hardware Engineer.

Mar 29, 2014 | Ricoh Printers & Copiers

1 Answer

Error code sc200 on a ricoh afcio mp c1500


The 7,010.43 error code indicates the printer is having difficulty tilting the printhead forward from the parked position to the print position. There are several printer systems involved in tilting the printhead so troubleshooting the error can be challenging. The printer does not directly sense the printhead's tilting position. Instead it applies drive current to the process drive motor, and monitors the motion of the motor's rotation encoder for "following error". For a particular drive voltage the encoder should rotate at a particular rate as the printhead (driven thru the process drive, the DM camshaft, and the head tilt gear train) tilts forward. If the printer does not see the expected encoder readings it assumes a tilt failure.

for more hrlp visit CBR Tech Solutions

Mar 30, 2012 | Ricoh Aficio Printers & Copiers

1 Answer

I have a used Ricoh Afcio 350 copier. How do I get the current copy count.


Press the {User Tools/Counter} key.

The User Tools Main Menu appears.

Enter {2} with the Number keys.

(is this what you are looking?)

Feb 03, 2011 | Ricoh Aficio 450 Copier

1 Answer

Ricoh 6513 Error Code Sc.387 Error Code Sc.457 Error Code Sc.350


1. Set SP3-125-003 to a value of
2 to enable Job End & Non-use
3 Self Check Mode.

fore more hrlp visit https://cbrtechsolutions.net

Jan 21, 2011 | Ricoh 6513 Copier

2 Answers

Problem with the Ricoh mp c2800 Ricoh error code sc 672,


If the model ia a MPC 2800 it a controller board issue maybe the operation panel. -carl

Nov 15, 2010 | Ricoh Aficio 1035 Copier

3 Answers

Error code 350 error code 990 error code 540


Error code 990 indicates software problems yuo can check in SP7-403 for information.
Error code 540 will proberly indicate some heating trouble in the fix, you have to reset the machine with service code SP5-810.
Code 350 will disappear if you restart the copier.

Oct 09, 2009 | Ricoh Aficio 1035 Copier

3 Answers

Error code sc 101.... sc 350


SC101 Scan Lamp Error
SC350 ID sensor pattern test error

Your scanner should be checked by a technician to determine what is causing the error. There isn't any calibration or troubleshooting that can be done unless you have scanner parts.

Aug 21, 2008 | Printers & Copiers

Not finding what you are looking for?
Ricoh Aficio 450 Copier Logo

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts

quennie732

Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...