Where can I find a SG3 SG4 USER GUIDE?

I've located the download page for the CaddieSync desktop application for your SkyCaddie SG4 GPS. Simply visit this link: http://www.skygolf.com/skygolf/Membership/Owners.aspx and you should find the download. You'll need to select the Mac option and then choose SG4 for the model. Remember: don't connect your device to the computer until after you have the software installed.

Me to and can't find the problem after 5 hours of research.44alter

Click Here!! To be forwarded to the SkyGolf website fore more information and your download!!



If this was helpful please rate with a 4 thumbs up!! Thanks for using fixya.com!!

here ya go
http://www.retrevo.com/support/SkyGolf-SG4-GPS-manual/id/4539ci967/t/2/

plug in your connection cable to the back of the skycaddie with the cord going down towards the battery, not up. This should fix the USB recognition issue.

Contacted SkyGolf directly and they were very helpful. It was a simple software reset accomplished in two steps:

On the TOOLS pulldown menu, select RELOAD, then select RELOAD LAST APPLICATION, which in my case was the latest firmware update (ver 2.2). They (SkyGolf Tech Support) also accesses your computer remotely via a HS Internet Connection and can do the entire process for you.

It then reset the last update program, which had stalled (causing the lock-up) and then all I had to do was reinstall the latest update, disconnect the Skycaddie and do a GPS RESET outside where it can capture the satellites, then do another SYNC to get it back where it was before the problem began.

I was very thankful that it did not require sending the unit in for repair or replacement.

Additionally, the newest firmware update adds SCORING capabilities to the SG4, which I think is cool.

Turn your power cable/connection cable over. You are connecting it wrong. When connecting it to the back of the SkyCaddie, make sure the cord it going down towards the battery, not up. That will fix your issue.

This may sound crazy but I had the cable connected incorrectly (I was getting a message that my Sky Caddie SG4 was unrecognized). When connected the cable correctly (to the back of the SG4) the cable wire should be pointing down.

Thats all it took to fix this issue for me.

Firewalls don't just present themselves through Windows. Do you have an extending firewall software like Norton, McAfee? If so, you will need to also configure/add the SkyCaddie Desktop program to those. Also, is the internet connection from the computer you are using on a router or nodem? Is it located in a business who has security on the network. If it is the latter, there is little you can do about that. If it is the first, then you will need to reconfigure router settings to allow also for the software. These items are different for every computer so the techs there will not know how to personally reconfigure routers and networks, but they can assist you with Norton, McAfee,etc.