Question about E-Machines eMachines Desktop PC

1 Answer

Help my e machine is not responding?

Posted by on

  • Dwayne Stewart May 11, 2010

    Have you tried to restart the computer? If so, how long before it freezes?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Contributor
  • 59 Answers

Provide more details please, what model/specs, what operating system I know its most likely windows but is it XP or vista or something older. is it a reoccurring problem where it stops responding or it just wont turn on at all or it lights up and doesn't do anything else, is it a single device thats not working, are there any error messages when the issue occurs or can you use the mouse and just one program is not working, try pressing caps-lock or num lock on the keyboard when it happens does the light on the keyboard change they should go on and off as you press the button, this usually means the pc is still functioning, just currently under a heavy workload for some reason, could be a virus do you have restore disks to try on it. the more details you provide about the problem, like what you are doing when you have the problem, when it started any changes before it started etc. could help determine the problem and the more details you give the people trying to help you the faster they can help you and the better they can help, Good luck.

Posted on Apr 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Lg washer cycles button not responding

One simple thing you can try is to unplug the electrical cord from the wall for at least a minute then plug it back in and try the machine. This worked for me recently on an LG front loader that I was asked to look at. The machine wouldn't respond until I reset it then it worked fine.

May 01, 2014 | LG Washing Machines

1 Answer

At&t 1717 after power failure get beeps and flashing "E2" code. 1717 no longer responds to any command.

Please check the manual, or download it here. At page 7 of the manual, theyl mention you need to call a service-number for help, concerning E-codes.

Oct 10, 2012 | AT&T 1717 Digital Answering Machine

1 Answer

My bernina E65 will not work,Help

since the machine has been sitting up for close to 2 years it needs to be serviced also.
when a machine sit up the grease & oil can become yuckie & machine will not respond good & sometime not respond at all.
it's also possible that the machine can have a loose or broken part

Mar 19, 2012 | Bernina Sewing Machines

2 Answers

The machine works OK when I press a 1-cup button, but has no response to pressing a 2-cup button.

When did this start happening? Are you a diyer? any good at disassembling things? The only thing i can think of is to take apart and clean, and clean contacts sir/maam. Short of that, you need to take to small appliance repair person. Thank you.

FixYa Support

Aug 29, 2011 | DeLonghi Esclusivo Magnifica ESAM3300...

1 Answer

Can't get my unit to respond with power switch on

With it stuck on "hello" it means there is likely a blown capacitor in your machine. I had the same problem. Replaced the faulty capacitor ($0.40 for the part and some quality time with a soldering iron) and my machine works perfectly again. Hope this helps.

Jan 16, 2010 | RCA DRC8335

1 Answer

My scanner is nor responding to the installation,what can be wrong?

try the scanner on another machine, if it responds on another machine then that means you have an operating system problem on the original machine. If the scanner doesn't respond on the other computer as well then that means the scanner is bad and would need to be replaced.

Jan 01, 2010 | Visioneer OneTouch 5800 Flatbed Scanner

1 Answer

Pfaff creative 7514 has power but will not respond

Reset it take out the batteries, unplug it and wait a few days and then put back in the batteries and see if that helps.

Aug 25, 2008 | PfaFF Creative 7570

3 Answers

CL on display panel - washing machine will not respond

CL stands for child lock to take it off press and hold TEMP and TIME DELAY at the same time and this should remove it

Dec 11, 2007 | Washing Machines

2 Answers

The Laptop Wont Even Start

Acer has the tendancy to blow it's regulator circuit, it makes a fast tik-tik-tik sound, if so, send in for repairs, nothing you can do to fix it. JJ

Sep 11, 2007 | Acer TravelMate 2355LCi Notebook

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides