Question about Rangemaster 110 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range

5 Answers

Rangemaster 110 the clock is stuck on auto and is not letting letting the ovens ignite, can I bypass the clock?

Posted by on

  • 4 more comments 
  • Anonymous Apr 18, 2008

    Leisure quoted me £95 to disconnect the clock!! Mine is stuck on auto too.

  • Anonymous Apr 19, 2008

    so is mine! and I have people coming to dinner!!!!

  • Anonymous Apr 19, 2008

    my clock is stuck on auto - and trembling - cant activate the oven

  • FAYSWEENEY Jun 01, 2008

    Have the same problem, clock is flashing and oven will not ignite

  • awms Nov 06, 2008

    I have an all electric Rangemaster 110 and the time has just packed up. similar symptems to the other reports. The display dims when the buttons are pressed, flahses randomly and occciasionaly works after pressing the rest button- although this last a few second or an hour or so. I would like to replace the timer and it looks like they can be ordered from a number of suppliers. However I cannot work out how to get access to the timer to either replace it or check its part number. The only bit of the cooker that appears to be able to be unscrewed is the back panel. Is this the way in? Any advice or guides on how to change the timer gratefully received.

  • Anonymous Mar 12, 2014

    How do you change oven bulb on a rangemaster 110

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Hope this helps with your dual fuel version 3 weeks on and working perfectly! Rangemaster 110. Ovens not lighting due to faulty auto/clock. FIXED! Our clock /timer kept flashing and would not reset
Someone, somewhere on the internet had the solution to my problem but I can't find the link again to thank them! If you don't mind losing the clock/timer auto function this is for you and it's free! Just takes a bit of time.
Basically you need to lift/open up the LH &RH hobs to get at the wires behind the clock. You should see 2 blue(neutral) wires coming directly from the back of the clock. Pull them out and connect together - should be easy to click them together. Then the ovens will light - but you will lose the auto/clock/timer functions. We only used the timer so not a big issue. We didn't take the control panel off but we did take ages to unscrew the hobs etc Probably took us about 2 hours going back to instruction manual we found on internet and trying to work it out but I think we've saved a lot in not replacing the unit with the usual call out charges. We made sure electrical supply was switched off and just took our time. Really chuffed!
Comment by tinling, posted on Nov 06, 2008 http://www.rangemaster.co.uk/Siteimages/Site_311/BigMedia/RM110Gas_04_06.pdf

This should allow you to see the instruction manual for the 110. There was another one somewhere showing a diagram of how to link the 2 blue wires at the back of the clock but I can't find it again! By the way our cooker is 10 years old so maybe different from newer models. We didn't have to take of the front control panel we accessed everything by lifting up the hobs to get behind the clock/timer.

Hope this helps! Ovens still working just got to go and buy a wee timer.

Posted on Nov 24, 2008

  • UncleBrian Oct 17, 2010

    thanks fore that, we dont use the timer so disconecting it will be no hardship and the link to the instrution manual was also a great help.
    ttfn

  • Rob Hastings
    Rob Hastings Oct 28, 2013

    Solution works like a treat. Thank you tinling

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have an Aga Rangemaster 110 which was stuck on flashing 0.00 / auto too. The solution was to press the 2 left hand buttons simultaneously and then the "+" button to set the clock.

Posted on Mar 29, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It's very simple. When your clock is flashing between 0.00 and Auto, you need to press griller and oven buttons simultaniously once. The 0.00 should have stopped flashing. You then need to press the "-" button. If that doesn't work, press the griller/oven buttons simultaniously again so that the 0.00 stops flashing, but then press the button directly on the right, (the button that looks like a hand) instead.
Hope this helps.

Posted on Mar 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Clock stuck on auto and cooker will n ot ignite

Posted on Nov 23, 2008

  • bear Aug 14, 2013

    'Tinling'...THANK YOU for posting your solution to 'fixing' this model!!...my ovens have not worked for two years because as a single moher of 4 I couldnt afford a 'call out'....Today, my daughter and I had a go at the simple task and now have TWO WORKING ovens MINUS a clock / timer I didnt use anyway!!!!!

×

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Thanks for this folks. Re the first answer yes it's an absolute nightmare to get to the timer wiring as intimated. Took two of us to get the oven far enough out from the wall to get into the screws at the back to allow the hobs to come off. On our oven there was a protective cover over the timer so still couldn't get at the wires ! Had to then remove all the gas burner handles (they just pull off) and then unscrew the front panel - there's lots of screws underneath holding it as well. Once that was off there were the two blue wires - tadaa - only on my cooker they were both linked together already and went straight into the timer onto a spade connector. Removed them from the spade connector and that was it!! OK the clock is now blank but everything working again. Replace everything in reverse order and you are back in business. Takes a while but worth it.

Posted on Dec 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a leisure rangemaster 110 dual fuel cooker. The auto timer has gone wrong. How can I bypass this timer


at the back of the timer/clock there are 4 wires live and neutral to power the timer/clock and 2 others they may be red or orange. safely connect these other 2 together and you are good to go. if you need a new clock email me info@topoftherangeltd.co.uk

Feb 12, 2010 | Rangemaster 110 (Dual Fuel) Dual Fuel...

4 Answers

How do i bypass the clock on my rangemaster 110 cooker


Have had trouble with our timer on our Rangemaster 110 so ordered a new timer only to be credited as it is no longer available. Dont realy want to buy a new cooker this side of christmas, any way of bypasing the timer ?

Nov 11, 2009 | Rangemaster 110 (Gas) Kitchen Range

2 Answers

Both ovens on my leisure rangemaster 100 will not come on


phone rangemaster they can advise how to change the spark in egnition and supply bit. 08707 895 107

Jan 23, 2009 | Rangemaster 110 (Gas) Kitchen Range

1 Answer

Rangemaster 110


i used the solution above worked great as i never used the clock anway . but instead of removing the whole hob i simply un screwed the front panel 5 scews. pulled the front panel out about an inch and used a pair of long nose pliers to remove the blue wires cliped them together. then just screwed the panel back took about 5 mins.

Nov 01, 2008 | Rangemaster 110 (Gas) Kitchen Range

1 Answer

Oven will not ignite


Rangemaster 110. Ovens not lighting due to faulty auto/clock. FIXED!
Someone, somewhere on the internet had the solution to my problem but I can't find the link again to thank them! If you don't mind losing the clock/timer auto function this is for you and it's free! Just takes a bit of time.
Basically you need to lift/open up the LH &RH hobs to get at the wires behind the clock. You should see 2 blue(neutral) wires coming directly from the back of the clock. Pull them out and connect together - should be easy to click them together. Then the ovens will light - but you will lose the auto/clock/timer functions. We only used the timer so not a big issue. We didn't take the control panel off but we did take ages to unscrew the hobs etc Probably took us about 2 hours going back to instruction manual we found on internet and trying to work it out but I think we've saved a lot in not replacing the unit with the usual call out charges. We made sure electrical supply was switched off and just took our time. Really chuffed!
Comment by tinling, posted on Nov 06, 2008 http://www.rangemaster.co.uk/Siteimages/Site_311/BigMedia/RM110Gas_04_06.pdf

This should allow you to see the instruction manual for the 110. There was another one somewhere showing a diagram of how to link the 2 blue wires at the back of the clock but I can't find it again! By the way our cooker is 10 years old so maybe different from newer models. We didn't have to take of the front control panel we accessed everything by lifting up the hobs to get behind the clock/timer.

Hope this helps! Ovens still working just got to go and buy a wee timer.

Jul 11, 2008 | Rangemaster 110 (Dual Fuel) Dual Fuel...

1 Answer

Cooker stuck on auto


Comes on like this when switched on, hold down the left 2 buttons on the clock controls then whilst still holding them pres the right hand button

or manuals available here...
http://www.rangemaster.co.uk/index_Rangemaster_Manuals.htm

Sep 18, 2007 | Rangemaster Classic 110 (Dual Fuel) Dual...

3 Answers

Problem with clock and Auto setting


hi, we've sorted it now, we just pressed the buttons very hard....

Apr 05, 2007 | Rangemaster 110 (Gas) Kitchen Range

Not finding what you are looking for?
Rangemaster 110 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range Logo

10,269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rangemaster Kitchen Ranges Experts

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

paulcarew

Level 3 Expert

2047 Answers

Are you a Rangemaster Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...