Question about Daewoo DW500M Top Load Washer

3 Answers

Error code h6

Machine stops after 15mins on any program

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

H6 on a daewoo is a heating element problem. Run it on cold to double check! There are generic youtube videos to show u where to locate the heating element. Check the wiring as this can work loose.

Posted on Jul 19, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 871 Answers

Hi dougie

you try to use any program for your daewoo top load washer and after 15 mins, everything stops? am i right?

does this happen even with a little load of laundry?

the manual asks if you followed the correct amount of laundry into the washer. if an error appears, this usually happens.

check for the fuse just for checking purposes.
check if the sensor is still operational. you can try to check if the sensor is still operational by doing some light laundry.

post back

post back

Posted on Apr 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

Hi friend

hi think ur proggremed chip has been damged so u have to chage it or a timer ckt has a probelm so chenge it

Posted on Apr 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codes sandstrom S814WMB12


on the screen is symbol OE WHATS THATS MEANE?

Jan 03, 2014 | Washing Machines

1 Answer

Fault code h6


Hi my washing machine ( a swan sw3010b ) keep draining the water and after a while it shows a foult IE. Can someone helps please

Nov 14, 2011 | Washing Machines

1 Answer

Daikin error code H6 Outdoor Compressor motor position detection sensor error


sir
daikin inverter air conditioner we are replace the indoor pcb then next it gone out door pcb,next we are replaced outdoor pcb also then compressor not working oftre last we are replaced compressor then it will be giving H6 ERROR CODE please give me suggestion

Feb 16, 2011 | Heating & Cooling

1 Answer

My dwdf1251s washing machine keeps sticking on a program and gives the code h5 and h6 please can you advise me


More likely than not your main function timer is failing and needs to be replaced. Thanks, Dana

Jan 17, 2010 | Washing Machines

2 Answers

Bosch Washing MAchine - E2 error message


Hi.

E2 means uneven balance.

The error code gets reset using the following procedure:

Ensure that the machine door is closed. Turn the dial in the OFF position.
Hold down Start/Pause button and turn the dial anti clockwise at the same time until its position is pointing at the Express (15mins) program.
Hold down Start/Pause button until the e2 message starts flashing (or keep holding for about one minute)
Release the button.
Turn the dial again to the OFF position.
The machine is reset. Select any program.

If the message comes back after selecting program, then there is still a balancing problem. Remove and redistribute load, check floor and ensure machine is at level.

Jan 31, 2009 | Bosch WFMC 3200 Front Load Washer

2 Answers

Washing machine error code h6


hi,
seems a spade connector had dislodged itself from the back of the machine reattached and all works seems it was a heat problem.
Hope this helps
please give me a FixYa rating if the solution works.
Thanks

Jan 04, 2009 | Washing Machines

1 Answer

H6-00 IS SHOWING UP


Dear sir; H6-00error code on this machine , it means "fuser oil empty" you just add the fuser oil in it should be OK, if still have problem please let me know, otherwise be generouse give a rating.

Dec 22, 2008 | Sharp AR-C160 Color Copier

1 Answer

DWD1210S/1210W


H6 is an error code with the heater - you will need to get a professional to look at it.
We have one of the machines and it has been trouble since day one. We will not be getting another.

Aug 17, 2008 | Washing Machines

4 Answers

Washing machine fault


im having the problem now with my daewoo that every time i put a wash on its giving me a H6 message error

Nov 09, 2007 | Washing Machines

Not finding what you are looking for?
Daewoo DW500M Top Load Washer Logo

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Washing Machines Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

dweatherby

Level 2 Expert

230 Answers

Paul Bade

Level 3 Expert

1398 Answers

Are you a Daewoo Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...