Problem for Craftsman 20 hp 42 in. Deck Lawn Tractor - ca model wheel alignment: both wheels point outwards

SearsPartsDirect will let you download one

check for binding pulleys and alignment of the pulleys

there is a clip behind the plastic cover but most of the time the wheel is stuck to the axle in that case i just change the tire on the mower

Did you forget to reinsert the key or did it slide out while putting the wheel on. A quick way to check is if you remove the center cap and have someone put it in gear and try to go while you are watching the axle. If the axle is turning and the wheel is not then the key is missing.

i have a 16.5 hp with a 42 deck for some reason one blade cuts alot lower then the other is there a way to adjust thanks

it sounds like your drive belt is too loose check it out and possibly look into replacing it, it sounds like its slipping

the bushings or bearings are bad.replace each wheel then you will be fine...good luck

You need a new magneto:)

Is the transaxle pulley turning? If so have you removed the rear wheel recently and possibly lost the square key that fits on the axle?check those two items first.If ok it probably has a broken gear or shift key in transaxle.

check the rear wheels,has you fixed a flat and not put a key back in or not fitted the wheel correctly.
Some hydro ?? cut out levers only have a spring to pull it back and get stuck.