Question about Creative Labs ZEN Vision:M Digital Media Player

1 Answer

My computer is detecting but not showing the icon

When i on my computer it is detecting but it is not showing any icon on my computer

Posted by on

  • sandy846 Apr 05, 2008

    detcting but no icon on my computer

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

Unplug, restart computer, try one more time. If that fails,
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Posted on May 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i update my Archos 504?


How to install firmware ..?(update)

Step 1. Download the firmware to your computer-->click HERE to download the update file When you download the update file, your browser may warn you that the file 'could be harmful'. This is normal because browsers are not familiar with files that have a .AOS extension and suspect that they could be malicious. These files are not harmful to your computer.

Step 2. Turn on your ARCHOS device and connect it to your computer with the USB cable

Step 3. On the ARCHOS, choose to connect and wait a few seconds for your device to be detected by the computer

Step 4. Copy and paste the downloaded firmware (.AOS file) to the ARCHOS device.
  • Case 1: logo_firm_hdd.jpg Your ARCHOS is detected by your computer as a Hard Drive (E: for example) in Windows® Explorer. Paste the update file directly onto the ARCHOS hard drive icon.
  • Case 2: logo_firm_g4.jpg Your ARCHOS device is detected as a 'Mobile Device' in Windows® Explorer (not as a hard drive) and you see just two folders Data and Media when you open it. Paste the update file into the folder called Data.
  • Case 3: logo_firm_g4.jpg Your ARCHOS device is detected as a 'Mobile Device' in Windows® Explorer (not as a hard drive) and you see Internal Hard Drive when you open it. Open this Internal Hard Drive icon and you will see the various ARCHOS folders inside (Video, Music, etc.). Paste the update file into this area but be careful not to paste it into any of the folders there.
Step 5. Disconnect the Device
Unplug the USB cable (for 'Mobile Device' connections) or use the "safe disconnect" green arrow icon (for Hard drive connection) in the system tray before unplugging the USB cable.

Step 6. On your ARCHOS device, click on "Update Firmware"
Click on the "tab" button to show the settings screen. Select the "System" icon and then click on the "Update Firmware" button. For the ARCHOS 104, 202, & 204, go to the settings and open the icon "System" where you can find the Update Firmware button.

Dec 31, 2010 | Archos 504 500870 Digital Media Player

1 Answer

I need to download music and there is no file for


Hello,

Using XP, the player should be detected through the USB port of the computer as a removable disk [also called MSC device].
note:
Before disconnecting the player, always go through the icon "Safely remove hardware" in the right corner below of the computer screen, to keep the player free from data loss or data faillure.

----------
First prepare the player before connection / check normal working of the player:
0. Player NOT connected to the computer
1. Switch the player ON using the >| button
2. Check the HOLD icon in the display: padlock should be OFF
3. When the padlock shows up, unlock the player: slide the HOLD switch to the left: padlock should not show in the display now.
4. Switch the player OFF, holding the >| for about 3 seconds.

When the player should not behave normal, perform a RESET.
0. Disconnect the player if connected to a computer.
1. Remove the battery from the player and leave it out for 10 seconds.
2. Replace the battery.
3. Power ON the player with the >| button and see if the player works normally.
4. Switch OFF the player, holding the >| button for 3 seconds.
----------

How to check the detection of the MSC device on your computer:
0. Player Normal Functioning, NOT connected, NOT locked and switched OFF.
1. Explore 'My Computer': click start in the left corner below of the computer screen and select 'My Computer'.
2. Connect the MP300 to a USB port; detection may take some time.
3. Look on the computer screen if a new removable disk shows up in the explorer overview, coming up with a new drive letter.
4. Now you should be able to put music onto the player, showing up as a removable disk with the new drive letter: use 'copy and paste' or 'drag and drop' method for music transfers.
note:
Before disconnecting the player, always go through the icon "Safely remove hardware" in the right corner below of the computer screen, to keep the player free from data loss or data faillure.

When no new drive letter shows up, try another USB port.
Connect directly to the computer, not through a hub.
If you need more help, tell me at what point connecting or transferring fails in this thread.

There's also a software program called Coby Media Manager that can be used for detection or transfers. Coby Media Manager is based on MTP connection mode.
Need help for this ? Write your comment in this thread.

May 28, 2010 | Coby MP300 MP3 Player

1 Answer

Kingston 8 gb pen drive is not being detected. Other pen drives are being detected. show solvation.


Kingston pen drive not detected?
have you tried on another computer? most likely you unplugged it without stopping it first from the icon on the right corner that causes the 5 volts on the USB port to short it out and either erase the information or just ruins it.
plug it to another pc and see if it works that at least will tell you if it is the pc or the flash drive

Apr 27, 2010 | Pen Drive IVO MP3 Player

2 Answers

My 2gb pendrive not working it is not detected


Trouble:
You may have faced a problem when you insert your pen drive and it gets detected very easily but it doesn’t show up as a drive icon in My Computer. The Computer detects the pen drive but data on pen drive is not visible as the pen drive is not visible in My Computer (Explorer).
This problem occurs mainly when windows XP fails to allocate a drive letter to your portable drive(pen drive). It occurs mostly with new pen drives connected to your computer for the first time. If you face such problem then it may not be the pen drive’s fault, rather it may be windows trouble.

If Problem Fix:
Fix:
You can fix this issue by following some simple steps given below.
1. Click Start, click Run, type compmgmt.msc, and then click OK.
2. In the console tree, click Disk Management. The Disk Management window will appear.
3. On this disk management window, you can see some drives including the portable drive. Right click on your portable drive and click change drive letter and paths.
4. Now a assign a new drive letter which is not being used by any of your drives in My Computer.
5. After assigning the new drive letter your portable drive will show up in my computer with other drives

Jan 29, 2010 | Transcend T.sonic 612 MP3 Player

1 Answer

Every time I hook it up to my computer it says installing device, even though I already have the software on my computer and my computer doesn't detect the device


run the wizrd intallation your comp should all ready have 'wizard' the reason its doing this is because you removed/unplugged the device with out safetly removing it from the computer the icon should show up on the right bottom of the computer just for further ref

Dec 21, 2009 | Microsoft Zune JS8-00001 Digital Media...

1 Answer

Sir my pendrive is detected but the icon is not showing in my com


computer should have malware virus try to scan the pc and then connect it

Sep 15, 2009 | Transcend T.sonic 850 MP3 Player

1 Answer

PLAYER NOT DETECTED BY COMPUTER N HANGS WITH A WHITE DISPLAY


go to site enter mp850 then serial no then download firmware.
i will research the steps to restore so it will be recognized on computer and email it to you http://www.transcendusa.com/Support/FAQ/index.asp

May 31, 2009 | Transcend T.sonic 850 Digital Media Player

4 Answers

Sansa Clip does not show up on computer


I had the same problem all you've got to do is first turn on the sansa clip.Then go to settings. After that scroll down to USB mode (second from bottom) then it woul probably say auto detect. Scroll down to MSC then hit enter. If that doesn't work try MTP mode.

Jul 11, 2008 | SanDisk Sansa Clip MP3 Player

2 Answers

Computer wont react to MP3


usb doesnt have any drivers
drivers are for the devices which are connected if the comptuer is not responding to the device there might me various issue
first the
check if any other device wd usb port is working or not
then check the auto play optin
check weather the device is detected in device manger or not
then decide wt is wqrong if any other device is being detected by the compter ther will be trouble wd teh mp3 other wise computer

Jan 31, 2008 | Coby MP-C582 MP3 Player

2 Answers

Sansa clip; Does not appear on icons


unplug Sansa MP3 player from your PC, go to menu ->settings, scroll down to USB-Mode, change mode from MTP to MSC, re-connect, yout PC will connect, detect new usb devive, disk drive.... and your sansa icon will be displayed at computer folder.
Good Luck

Dec 25, 2007 | SanDisk Sansa Clip MP3 Player

Not finding what you are looking for?
Creative Labs ZEN Vision:M Digital Media Player Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...