Question about DVD & Blu-Ray Players

Open Question

Need code numbers to progame my dish remote to vcr whs1958@yahoo.com keith roop 309 bayshore dr. easrlake ohio 44095 thanks

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: i need a remote code

have the same problem. I have Chunghop Universal remote RM88E but unable to find code for ORBIT DVD player

Posted on Nov 12, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: need a code for a magnavox dvd/vcr com for a jumbo universal remo

7-1-1 and 0-7-1-1 are the Magnavox universals.

Posted on Feb 15, 2009

  • 814 Answers

SOURCE: code for ch-dvd 300 ???

you can try these codes and if they do not wok check the websites also listed. They might be able to help you. I hope this helps you with your problem.
Search results for Philips Codes For Cyberhome Dvd RC Forums: Cyber home DVR player codesPhilips Pronto Professional TSU9600 vs TSU9800 ... sale at half-price, these iclude the 15-133, 15-134, and 15-135. each has 5 Cyber Home dvd codes ... http://www.remotecentral.com/cgi-bin/mboard/rc-one4all/threa... Philips PMDVD6Philips PMDVD6 Universal Digital DVD (6 Devices) ... CYBERHOME: 0940, 0100, 0595: CYTRON: 0246, 0440 ... DVD-Recorders + RW. Where codes are shown like this [###] each one ... http://www.remotecodelist.com/remotes/philips/philips_pmdvd6...

Posted on May 18, 2009

  • 1 Answer

SOURCE: Need code for Emerson TV,DVD,VCR Combo

called comcast

Posted on May 28, 2009

  • 86 Answers

SOURCE: need code,so my dish remote will work with magnavox vcr/dvd

Such a code may or may not exist. If none of the codes listed in your owners manual work (you didn't list a model number so I can't give you specifics)you have 3 options. 1) Contact DishNetwork and see if they have additional codes not listed in the manual. 2) Contact Magnavox and see if the have additional codes to try. 3) Purchase a 3rd party remote that works with both devices.

Posted on Jun 03, 2009

SOURCE: i need remote control codes for a Sylvania VCR/DVD

hi! i have here a couple of codes for your sylvania DVD/VCR just try them, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1145, 3095. hope this helps!!!! goodluck!!!

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me the 3 digit nunber to make my dvd/vcr compatable with dish network tv?


We would be happy to help you with getting your DISH Networkremote to control your Sanyo DVD/VCR combo unit. Pressand hold the VCR/DVD button located on the top of your remote until all mode buttonback lights come on, then release. Use the number buttons to enter thecodes for your Sanyo DVD/VCR combo unit; here some of the codes we currently have: 549, 583, and 608. Press the pound (#) button. To check that the codeworks try several different functions on the remote to make sure it willproperly operate the TV. Keep in mind that some codes may not be compatiblewith your equipment. If this is the case, try the other codes listed for thatdevice until you find one that is compatible with your equipment.
If you were not able to get your DISH remote to work with it with the codes provided, try a power scan. Pressand hold the VCR/DVD button located on the top of your remote until all mode buttonback lights come on, then release. Press and release the power button. Press the Up button once a second while pointing the VCR/DVD combo unit. If the code for the equipment comes up, it will power off. Press the pound (#) button.
We hope this help and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 04, 2011 | Sanyo DVW-6000 DVD Player/VCR

1 Answer

I have a vcr dvd combo and i want the code for my dish network remote so i can use one remote please


We would be happy to help you with that. Here is a list ofcodes that should address your DISH Network remote to your Emerson DVD/VCR combo unit: 588, 505, 506, 518, 534, 536.

Press and hold the DVD/VCR button located on the top of the remote until allthe mode buttons at the top of the remote light up, then release. Use thenumber buttons to enter one of the codes for your Emerson DVD/VCR combo unit, thenpress the pound (#) button. If the code entered is valid for the remote, themode light flashes three times. .To check that the code works try several different functions on the remote tomake sure it will properly operate your Emerson component. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment. We hope this helps and thank you forbeing a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 20, 2011 | Emerson EWD2203 DVD Player/VCR

1 Answer

Looking for a code to use on my Dish Network (Universal) remote in order to operate my Emerson Model EWD2202 Combo VCR/DVD player


Hi my nameis Mike Houston of DISH Network and I was going over your post and see whereyou want the codes to program the DISH remote to the Emerson DVD/VCR. We do nothave the three digit codes to enter however we do have what we call a PowerScan and it will allow programming the remote to the Emerson player, I willsend a link to help with these steps. http://www.dishnetwork.com/SupportSection/power-scan-instructions

Oct 31, 2010 | Emerson EWD2202 DVD Player/VCR

1 Answer

Need code for Sony BDP-S350 for a Dish Network 622 remote


We would be happy to help you with that. Here is a list of codes that should address your DISH Network remote to your Sony Blu-ray player: 629, 671, 868, 617, 501, and 768.

Press and hold the DVD/VCR button located on the top of the remote until all the mode buttons at the top of the remote light up, then release. Use the number buttons to enter one of the codes for your Sony Blu-ray player, then press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. Phillip Chang
DISH Network Customer Service Representative

Aug 01, 2010 | Sony BDP-S350 Blu-Ray Player

1 Answer

Panasonic dmr-e55 need code to work with our dish. codes listed in dish network book won't work?? HELP


We would be happy to help you with that. Here is a list of codes that should address your DISH Network remote to your Panasonic DVD Recorder: 627, 614, 777, 633, 554, and 628.

Press and hold the DVD/VCR button located on the top of the remote until all the mode buttons at the top of the remote light up, then release. Use the number buttons to enter one of the codes for your Panasonic DVD Recorder, then press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. To check that the code works try several different functions on the remote to make sure it will properly operate your Panasonic DVD Recorder. Keep in mind that some codes may not be compatible with your equipment. If this is the case, please try the other codes listed for that device until you find one that is compatible with your equipment. We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 22, 2010 | Panasonic DMR-E55 DVD Recorder

1 Answer

Need code,so my dish remote will work with magnavox vcr/dvd


Such a code may or may not exist. If none of the codes listed in your owners manual work (you didn't list a model number so I can't give you specifics)you have 3 options. 1) Contact DishNetwork and see if they have additional codes not listed in the manual. 2) Contact Magnavox and see if the have additional codes to try. 3) Purchase a 3rd party remote that works with both devices.

Jun 03, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

I need the codes to ste the remote control; dish for a Panasonic TVCR Combination TV Ser


i need the code to program a panasonic tv/vcr combo using a dish remote control.

Aug 30, 2008 | Panasonic DMRES30V DVD Recorder/VCR Combo

1 Answer

Dish Pro record code for Mag combo


ZNREL, I've done this with Dish Pro before. Setup the Dish remote to control the Mag combo in the VCR position. Press the SAT button and select the guide. Go to the program in the guide and select it. The "record this program" routine should pop up, set it up. Here's the key, make sure the Dish remote has the VCR button selected and that the remote is placed where it can "see" the Mag combo. At the set time, the Dish remote will change the DishPro to the proper channel and then issue s "record" command via infrared to the Mag combo to start recording. DishNet has all of the device codes to their remotes downloadable from their site.

Mar 05, 2008 | Philips Magnavox DVD/VCR Dual Player

3 Answers

Dish network


With the dish remote and do a code search as described in the remote manual and see if you can find it that way. If you go through the entire code search and none of them turn off the VCR/DVD combo, then there is nothing you can do, as those codes in the remote are all stored in the remote and they cannot be programed in. If you do not have a remote manual to set up the remote, to do a code search, simply go to the dishnetwork web site and search for it.

Sep 27, 2006 | Emerson EWD2004

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96396 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...