Question about Radio Communications

Open Question

Ford radio locked and cant unlock it back to put the code in

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Scanner I purchased from Radio shack and My niece played with it and locked every channel out and I cant get anything on it it doesnt say what kind it is but the code on the back of it is c101153...


It's impossible to give you a definite answer without knowing the make and model of your scanner, but if your display is showing a key or a lock, look for a key that has a symbol that looks like a key or a lock. With the scanner ON, press and hold that key until the display symbol clears. I hope this helps.

Bill B.
Listening in since the 60's

Dec 19, 2010 | Uniden BC60XLT-1 Handheld Scanner

1 Answer

Why cant i put in 160 to 161 into my scanner


Your radio has been made with certain frequencies not available due to FCC rules the MHz Outdoor Intrusion Detectors 160 - 176 Railroad 160 to 161
are likely reserved for the above services and may not be available to be scanned by your radio and there is nothing you can do about it as all radios are controlled by the FCC rules. It is possible that the manual for your radio will give you the information to unlock the frequencies if they have been previously locked out. These are the only 2 things that I can think of as to why you cannot scan those frequencies.

Charles a Ham Radio Operator.

Oct 27, 2010 | Uniden BC895XLT Base Scanner

1 Answer

I cant reprogram my channels back in ,think its locked


Here is a link to get the full manual... it should allow you to remove the lo on the channels... www.uniden.com/pdf/BC60XLTom.pdf

Jun 05, 2009 | Uniden BC60XLT Handheld Scanner

1 Answer

L/O is on all channels cant program with L/O on it


push manual then hold down lock 0ut button for several seconds this should unlock all

Feb 14, 2009 | Uniden BC60XLT Handheld Scanner

1 Answer

Wtf


hold down the light key/ lock key on the bottom left hand coner and it will unlock the unit

Jan 04, 2009 | Radio Shack Pro-82 Scanner

1 Answer

All channels locked after using win 96 on my pro-96 scanners


hello my name is kathy and i just had the same problem with mine.I know if you don"t use it very often and shut it off a lot you will loose the program. I first stoped turning it off at all and would just turn the sound all the way down. I went to each one and unlocked them, I had lost over half and the other was locked. I put them back in unlocked the ones the were locked, stoped turning it off 2 years ago and have not had a problem since. I hope you will let me know if this helped. k.ditterline@yahoo.com

Nov 28, 2008 | Radio Shack Pro-2096 Base Scanner

1 Answer

Lock out


press manual then scroll though the stored frequencies press the unlock button when you find the number you want, hold down till you get a beep sound. key icon should be displayed and will show that it has unlocked. then resume scanning

Nov 23, 2008 | Radio Shack Pro-95 Handheld Scanner

1 Answer

Cant find reset button inside scanner


There is a lock/light key at bottom left hand corner of buttons hold that down until it beeps and the buttons should be unlocked

Jul 27, 2008 | Radio Shack Pro-82 Scanner

1 Answer

All channels locked out pro-2055


I hope this will help. It shows locking and unlocking ids while scanning and while in a bank.


Locking/Unlocking IDs Contents You can lock out IDs you don't want to hear such as telemetry, MDT's, dog catcher, etc. To Lock out an ID while scanning, quickly press L/OUT while the ID is displayed. To Lock or Unlock an ID manually: 1. In Manual mode select any channel of the bank you want to lock or unlock an ID in by entering the bank number and channel number (Ex: 001) then press MAN to advance to the channel. 2. Press PGM then TRUNK to put the scanner in program and trunk modes. You will see the bank number (0-9), list number (0-4), and the list status (ON or OFF) on the 1st line, the ID# in the list (0-29) on the 2nd line, the ID on the 3rd line, and bank tag on the 4th line (if programmed). 3. Press TRUNK (each time) to select the ID list (0-4). 4. Select the ID# (0-29) by pressing up.jpg or dn.jpg (or press and hold; faster) then press L/OUT to lock or unlock the ID. An L will appear to the right of the ID# if the ID is locked out. 5. Press MAN to exit programming. To Unlock IDs in a bank: 1. In Manual mode select any channel of the bank you want to view the locked out IDs in by entering the bank number and channel number (Ex: 001) then press MAN to advance to the channel. 2. Press PGM then TRUNK to put the scanner in program and trunk modes. You will see the ID list. 3. Press FUNC then L/OUT (each time) to view the locked IDs. Press L/OUT to unlock the ID. The next locked out ID will appear. 4. Press MAN to exit programming. Note: You cannot unlock all IDs at one time.

Nov 18, 2007 | Radio Shack Pro-2055 Base Scanner

3 Answers

Locked out!


press and hols down the "LOCK" for three seconds

Aug 16, 2007 | Radio Shack Pro-82 Scanner

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1640 Answers

Brad Brown

Level 3 Expert

13732 Answers

Mike Charette

Level 3 Expert

1769 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...