Question about Audio Players & Recorders

2 Answers

Mp3 player works when its plugged into the computer but when its not it doesn't come on and there a new battery in there

Posted by on

  • Monzea May 02, 2008

    I am having the same problem, but mine doesn't work when I unplug it from the charger. What should I do

×

2 Answers

House music

Posted on Apr 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 35 Answers

Hello Jarvis.. Looks like the charging port of the player is damaged. You will have to get it replaced. It works when connected to computer coz the USB uses different pins to power up the player..

Posted on Apr 04, 2008

6 Suggested Answers

  • 70 Answers

SOURCE: rca mp3 player wont connect to computer

you can easily download the software by visiting the samsung website - www.samsung.co.uk and going to their support/download page.

The most common faults with this player are

1. The touchpad fails

2. The USB part of the device fails.

These are hardware faults and cannot be rectified other than replacing 1. the touchpad and with 2. the whole unit.

Makje sure you have loaded the software correctly first of all and have restarted your computer.

If you cannot see the player in windows explorer then most likely it is the usb hardware problem.

Posted on Dec 22, 2007

SOURCE: Innovage Shift 3 mp3 player

Just a suggestion do you have the switch on the side turned "on" when you plug it in thats the only time it will charge the battery

Posted on Jan 14, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: RCA H125A decrypt error!

Get the latest firmware upgrade from RCA's website

Posted on Jul 06, 2008

  • 1 Answer

SOURCE: my computer wont reconize my mp3 player

Down load the firmware on Sansa's website. I have a Sansa 250R and it wouldn't work with the new replacement usb (Griffin) cord I bought at Best Buy. So I bought a Sansa Fuze and the cord that came with it worked on the E250R. Huh? Yeah, go figure...and oh, that replacement Griffin usb cord I bought worked fine with the new Fuze. I came real close to buying a new battery for the E250R but instead invested that money in the Fuze.

Posted on Dec 19, 2008

  • 13 Answers

SOURCE: computer wont recognize sansa clip mp3 player

Reformat clip with disk utility after looking at it like an external disk. Do this by turning it off. Puting it in lock mode. Hold down middle button as you plug it in.

I am mad at my Clip as it did the same thing.

Screen shot here:
Sansa clip not recognized.

Posted on Dec 26, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost my charger to my mp3, where can I get a new one that doesn't cost much?


You can charge the MP3 player by connecting the USB cable to the MP3 player and then plug it into the USB port of your computer.

Jul 14, 2012 | Coby MP620 MP3 Player

1 Answer

My mp3 isn't turning on even thought it is fully charged but plays music when plugged into USB


There is a Problem with the Mp3 Battery its not Charging get it Replaced!

Dec 29, 2011 | Audio Players & Recorders

1 Answer

How do i transfer music to my zenex mp4 player? it's brand new but the cd (driver software) it came with doesn't work.


Hi lcharlingen3...
Downloading Music to your MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Please take time to rate me thumbs up.

Sep 18, 2011 | Audio Players & Recorders

1 Answer

What can i do when water is inside my mp3 player, then i lost it for a month. when i found it , i immidiaetly plugged it into my computer, it started working. i let it charge. when i took it out, it...


Good morning, afternoon, evening or night; whatever time of day you are viewing this post. Thank you for choosing FixYa to assist you with your problem. Your MP3 Player has been exposed to water, then it gets lost, you find it and immediately plug it into your computer for it to charge and start working again, then it shuts off after you unplug it from the PC. I don't know if you know this or ever read it in user manuals, but they tell you not to expose your electronic device to liquid substances. This can cause product failure as well as harm to yourself or others. I'm surprised it's still working when you plugged it into the computer. I had a flash drive that went through the same experience as your MP3 player: got lost and was exposed to rainwater, then was found later and started to work again once it was plugged into the computer. Later on though, the computer failed to recognize it and it eventually stopped working. I'm thinking the situation with your MP3 player is that the battery or a driver controlling battery functioning, is defective due to water exposure. The driver that controls the PC launch up, may not have been exposed to it as much. You could try opening your MP3 player (if it can be opened) and try to drain all the water out of it, then put it back together and try to turn it on again. If that doesn't work, plug your device into the computer and go to the device manager on your PC. If your computer recognizes the device, go to its properties and click the driver tab. Click "Update Driver" to see if a driver update is needed. If the driver is up-to-date, try uninstalling the driver, then reinstalling it again. If your device is not working properly after this. Then the battery, driver or other electronic circuitry inside of your MP3 player is defective. You can try to replace the battery, if it can be, to see if that makes the difference, but I'm pretty sure your MP3 player is defective now. I'm sorry for the inconvenience, but thanks for choosing FixYa to assist you with your problem. Have a good morning, afternoon, evening or night; whatever time of day you are viewing this solution post.

May 23, 2011 | Audio Players & Recorders

1 Answer

I just got my Coby Mp3, and i plugged the USB into my computer and the autoplay screen that is supposed to come on my computer, hasnt.


Does you computer detect a new device when you plugged the Coby MP3 player?
If Coby MP3 player has cd driver, better to install it to your pc. Some computer/laptop doesn't detect autoplay when new USB device plug-in

May 07, 2011 | Coby MP828 MP3 Player

2 Answers

How do you recharge the battery on the mp3


good day,

your mp3 player must come out of the package complete with its accessories and, of course, a battery charger. just plug the charger on its appropriate socket in your mp3 player and plug it on your wall socket.

just follow the suggested number of hours for its initial charging and after that you can just check if it indicates "battery full."

i hope this helps

Oct 12, 2008 | Audio Players & Recorders

1 Answer

Sansa c200


turn it on before you plug it into the computer

Dec 26, 2007 | SanDisk Sansa c200 MP3 Player

2 Answers

I have Sanso m250 2.0gb mobel. Logo screen is appearing when i power on after that i am unable to play the mp3 songs or play FM Radio etc..


Try doing a hard reset on a Sansa m250:
  1. Turn off the Sansa. Just pull the battery out for a second.
  2. Plug the Sansa into a computer4.gif, and open "My Documents" in the computer.
  3. Open the Sansa file as if it were a drive, then go to the "MUSIC4.gif Specific storage" file.
  4. Right click the "MUSIC Specific storage" file, and press "Format."
This should hard reset the Sansa m250. I do not know if this will work on other Sansa m200 type .mp3 players. You can start over with your playlists. This has worked for me.

Dec 23, 2007 | SanDisk Sansa m250 MP3 Player

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98608 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69570 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...