Question about Hitachi UltraVision CineForm 55VG825 55" HDTV

2 Answers

Tv screen stays black with the blue light and two red lights blinking

When attempting to turn on the television, the screen will stay black and you can hear the fan going. The blue light will flash on and off and the two red lights will blink, there is also a clicking or ticking sound.

Posted by on

  • 2waytangO May 07, 2008

    The set shut its self off. The lamp and temp lights flash red when I try to turn the set on. The lamp light is steady red when the set is off. I tried unpluging the set to reset it with no luck. I looked for a reset button on the back.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

My tv had similar problems, except, the screen went black and there was a ticking sound coming from it. I took it to a tv repair man and what it needed was a "high voltage transformer." After that I had no other problems.

Posted on Jun 05, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem, if anyone has a solution PLEASE mail me at [email protected]

Posted on May 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't it turn on?


There could be an open internal fuse or power supply failure.

Aug 19, 2015 | RCA Televison & Video

1 Answer

My Westinghouse LTV-30W2 when i turn it on the screen comes on and go's black my power blue light still stays on with sound what is wrong with it?


Thats usually an inverter board issue. Replacing the inverter should solve the issue in most cases. You can get the replacement inverter board from www.tvcircuitboards.com

Dec 12, 2012 | Westinghouse LTV-30W2 Television

1 Answer

I have a Olevia lt37hvs, When i plug it in the blue(olevia)light comes on then goes off and the screen will be blue for 5-6 second then go black for 1-2 seconds then screen goes blue again and it just...


tried to connect again the supply for main board and disconnect the supply for the inverter board of back light. and turn on the tv, if the indicator stay the inventer board was the cause of voltage drop at the power supply board.

Sep 08, 2012 | Olevia LT37HVS 37 in. LCD HDTV

1 Answer

Dell Inspiron 1525 laptop, no power light, battery light flash orange, wifi light flash blue and orange I bought the Dell Inspiron 1525 laptop in 2008. I use the laptop as a desktop, so I never plugged...


Since it sounds like an issue with the Power first try to release flea power.Disconnect the charger,remove battery,press and hold down the power button for 30 seconds.Reconnect the battery and charger.Turn on system and check if it turns on. For further help please check Dell Inspiron 1525 Manual. Also confirm if the light on the charger stays on,when connected to the system.

Mar 06, 2017 | Dell Inspiron 1525 Notebook

1 Answer

Flm-3201


my polaroid model #3200  does'nt come on!  the light goes from red to blue and nothing,the picture stays black with no flashing or flickering

Apr 01, 2008 | Polaroid FLM-3201 Television

1 Answer

Blue screen with Green Star-burst image in center?


Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.

For example, 3 flashes, then 7 flashes = 37.


Here are the error codes, and the corresponding problem:

12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected

Jan 19, 2008 | Mitsubishi WD-52725 52". Rear Projection...

2 Answers

Red light stays on


First before a reset the set must turn on, if the set just sits there with the red LED on you have further problems, so does the set display anything?

Oct 08, 2007 | Mitsubishi WD-62525 62" Rear Projection...

Not finding what you are looking for?
Hitachi UltraVision CineForm 55VG825 55" HDTV Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...