Question about Sharp AL-1655CS Copier

1 Answer

Sharp 1655cs- replace the drum cartridge

I have replaced the drum cartridge but this warning still won't clear. Thanks for the help in advance.

Posted by on

  • Anonymous Apr 30, 2008

    We have a Sharp Copier AL-1655CS. It showed we needed a new cartride. We replaced the old one with a new one but we still got the indicator still blinked but would print. We did this for a few weeks but now it will not print at all with the indicator still blinking. What do I do.



    You can call me at 623-936-6362.



    Bob Alexander, Pastor

    Westridge Baptist Church

    Phoeix, Az 85043

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

There is a set of gears in the front of that drum cartridge with a flag on one of the gears, It has to be in the up position to swipe the drum replacement sensor. Most likely the flag had dropped in shipping.
You can take the green front off the drum and try and get that flag up and to the right. Or take the drum cartridge for a return and a new cartridge.
If that flag has dropped in shipping, it will not reset the drum count.

Posted on Apr 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sharp AL-1655CS and when i make copies, the copies are really dark. For example, the white areas come out gray and dark. How can I fix this problem?


I would try a different toner cartridge or possibly a drum cartridge. Have you had the machine serviced at all? When?

Feb 14, 2011 | Sharp AL-1655CS Laser Printer

1 Answer

Sharp AL-1655CS ''Replace the drum cartridge'' error message


Have you replaced with a new drum cartridge? If so, does it still display error message? You have to simulate 24 sub 7 to reset drum .

Nov 04, 2009 | Sharp Office Equipment & Supplies

2 Answers

My Sharp AL-1655CS copier has new drum and toner. Leaves blank banding lines verticaly down the page in at least three areas.


This is a good one you may need to get it serviced.
The toner is held to the drum by static which rolls the toner onto the paper and seals the deal you may have a bunk drum, Validate your warranty and check for a service center.

Oct 19, 2009 | Sharp AL-1655CS Laser Printer

2 Answers

My sharp al 1655 says replace td cartridge. what is this?


It means that you should replace the toner and developer cartridge.

Jun 03, 2009 | Sharp AL-1655CS Laser Printer

2 Answers

Drum replacement


simulation 24 7 will clear the drum counter

Sep 25, 2008 | Sharp AL-1530CS All-In-One Laser Printer

1 Answer

Sharp AL-1655CS


  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display1.gif should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies1.gif.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Jan 07, 2008 | Sharp AL-1655CS Laser Printer

1 Answer

Replace td warning


I went into the user menu and RESET FACTORY setting and the error went away

Dec 11, 2007 | Sharp AL-1655CS Laser Printer

Not finding what you are looking for?
Sharp AL-1655CS Copier Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

98829 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...