Question about Pace Type 30-0060 1121-0369 D1 .060 D2 .188

3 Answers

Hi i have a pace sky digibox, it keeps saying no satellite signal, when it does get a signal and you go to another channel it freezes do you think the box is broken

Posted by on

  • Anonymous Jun 06, 2008

    sky pace box had it for ten yrs no probs lived here with it in tenerife 12 mnths no probs . juast got back from uk after 2 mths. box keeps saying no signal, eve



    n though frequecy shows 80% frequency set at 11740 v 27.5 2/3

    email kenlalley@hotmail.co.uk

  • worldspan May 01, 2009

    Pace 2600C some channel nogo, 105, 501, 146, 515 etc. Box OK otherwise. RWR

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i reset this on the remote as i dont have my manual anymore,could u put me thru pls

Posted on Sep 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this same problem and was at the end of my tether trying to resolve it, I tried everything suggested on the net, but to no avail so I tried another box and it was fine.I just thought the old box was a lost cause. I turned the old box off for 3 days, I just turned it on to try the above suggestion, but it was working again! Strange but true.

Posted on Sep 10, 2016

You need to reset your default transponder to :
12219 V 27.5 2/3

Posted on Jun 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have got a new sky+box and remote. can i use a previous sky remote with my new sky+box and if so, how do i sync it? thanks.


you can only use a previous remote if it is a sky+ remote, original sky remotes will not work with the sky+ box. vice versa

Nov 13, 2009 | Pace Type 30-0060 1121-0369 D1 .060 D2...

1 Answer

Virginmedia v+ HD chipped box


Yes, you can get it working, if it to undergo repairs. Talk to a qualified technician.

Sep 21, 2009 | Pace Type 30-0060 1121-0369 D1 .060 D2...

1 Answer

Sky plus freezing when attempting live rewind/ff/pause


Not sure if this is 100% but it just worked for me.
Disconnect from the mains, leave for a minute or two, reconnect.
Simple, think it must reboot the box or check for update or something.
Hope it works for you guy's too.

Jan 29, 2009 | Pace Type 30-0060 1121-0369 D1 .060 D2...

1 Answer

No remote for a 2500b pace sky box


The simple answer is no, you need a replacement remote

Jan 19, 2009 | Pace Type 30-0060 1121-0369 D1 .060 D2...

1 Answer

Pace Sky plus box


You have 2 choices, software reset or hardware reset. It's up to you what you try, but please read the advice in full before starting - if you break your box, please don't blame me!

SOFTWARE RESET
The following is copied from http://www.ecademy.com/node.php?id=73309

This is useful if your disk usage percentage doesn't go down even after clearing programmesfilms off.

The following is offered on an ADVICE only basis, take care when making changes:

WARNING following this advice is totally at your discretion and anything which happens to your digibox as a result is your responsibility, not mine. You will lose all recorded programmes from your Sky+ Planner.

Sky tech support can talk you through performing a system restore over the phone. To do this yourself, press 'services' on your Sky plus remote, then select option 4. Next press 0, 1, select - you should now see the engineer's menu. Choose option 8, 'Full System Reset'. The box will now take a few minutes to reset itself

Try pausing or recording again, and if the problem persists disconnect the digibox from the mains power. Press and hold the 'left' and 'right' navigation buttons on the front of the digibox whilst you reconnect the mains power. Continue holding the buttons in for about 20 seconds, and when the ring of light on the front comes on, press the 'select' button on the front of the digibox (between the left and right buttons you were holding). The Sky+ recording logo lights will spin backwards and, according to the Sky engineer, this will "clear the hard drive".

Once this is done, disconnect the digibox from the mains power again and this time press and hold the 'back up' button whilst you reconnect the mains power. Continue holding it for about 15 seconds until 3 lights on the front of the box come on and you get a full-screen message saying "Updating system software. Do not disconnect mains supply or satellite dish."

Leave the digibox doing its thing for about 10 minutes and it should be fixed! Try pausing and recording things again... hopefully you've just saved yourself £65

If you've not been so lucky, you'll have to get Sky to fix it for you. Some people report that if you ask to cancel your subscription Sky sometimes offer a free callout to fix the problem - you're more valuable to them as a paying customer than the cost of an engineer callout

Sky customer service's (seemingly unpublished) freephone number. You need to dial 0800 731 6965, then option 2, option 4 March 9, Sky have closed this Freephone number
HARDWARE RESET
Copied from http://www.digitalspy.co.uk/forums/showthread.php?t=484098

Full System Reset via front panel:
  1. Remove power at mains.
  2. Hold LEFT+RIGHT.
  3. Apply power, wait for ring to light.
  4. Release LEFT+RIGHT, press SELECT.
  5. Ring cycles backwards while disk is quick formatted.
  6. If format sucessful PLAY lights up, if not RECORD lights up.
  7. Box goes into standby - wait 30 seconds are wake it up.

Warning: Full System Reset deletes all your recordings and planner entries.

Good luck!

Aug 07, 2008 | Pace Type 30-0060 1121-0369 D1 .060 D2...

1 Answer

Pace i.3.33


get a multimeter and connect the black probe to the metal part of the closed box, connect the red probe to the middle pin hole of the sattalite input connector and tune into a channel

You shold be getting around 13v +/- 2v
OR
+18v +/- 2v

If you are not getting this your tuner has failed.

Jun 07, 2008 | Pace Type 30-0060 1121-0369 D1 .060 D2...

3 Answers

Sky plus stays on red all the time


you need to buy a security torx screw driver,

(diamond head with a hold in the middle)

I think it uses a T8 or T9

Apr 27, 2008 | Pace Type 30-0060 1121-0369 D1 .060 D2...

1 Answer

Sky plus


You can activate it online instead of calling - here is the link; https://mysky.sky.com/portal/site/skycom/support/contactusguest?setaction=reinstateSky Hope this helps :)

Mar 19, 2007 | Pace Type 30-0060 1121-0369 D1 .060 D2...

Not finding what you are looking for?
Blank Media Logo

657 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pace Blank Media Experts

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

sonny shoeria
sonny shoeria

Level 1 Expert

40 Answers

Are you a Pace Blank Media Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...