Lostn all my setings and the recovery disc will not laod up

most common reason for this is a dirty or bad Optical Pickup unit in the player.

Hi,


Welcome to FixYa! I believe you're having problem with the Operating System on your computer. Unfortunately, Lenovo will not provide a product key for the Operating System since the an OEM version. What you can do is reinstall the Operating System using the One Key Recovery Sofware or the Recovery Disc that came with the computer. Follow these steps for you to be able to reinstall the Operating System using the One Key Recovery.


1. Turn off the computer.


2. Press the little button near the power button, it usually do have a drawing of an icon that looks like a horse shoe or a headset.


3. There will be a window that will appear which do have three option, One Key Antivirus, One Key Recovery and System Setup. Choose One key Recovery.


4. There will be another window that will appear which do have two option, Restore from initial backup and Restore from user backup,Choose Restore from initial back up


5. It will asked you if you want to continue, Just click on OK or YES.


6. Once done, Reboot the computer.


For Recovery Disc,


1. Insert the disc inside the drive.


2. Turn off the computer then turn it back on and keep on tapping F12


3. There will a window that will appear which do have three options, HDD,ODD/DVD/CD, and NAT, choose ODD/DVD/CD


4. It will asked you to press any key immediately, you will need to press any key immediately so that it will boot from ODD.


5. It will asked you to choose a partition, choose Disc 0 partition 1


6. Reboot computer once done.


I hope this information will be helpful. Thank you for using FixYa...

Fully erase the hard drive and start again? Usually press F11 at boot time (HP screen) to go into recovery mode, and follow instructions. Otherwise, you need the recovery CDs or DVDs.

Set your 1st boot to CD/DVD from your Bios Setting or use the hp Boot utility when you restart your computer.

Insert your Recovery disc into the CD/DVD Rom and reboot your computer. Just follow the installation wizard to install your system back to default/original settings. All of your data will be lost.

**Note
When you use the Recovery disc all the setings will be reverted back to the original settings. Back up or save your data before you use the Recovery disc.

Hope it helps.

please refer to this link for your printer driver http://tinyurl.com/y89zv7h


If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

If you still have original set up disc, advise you reload. New drivers don't always kickin. Backup then try reloading?

WHEN YOU SAY YOU CANT INSTALL WHEN YOU START YOUR COMPUTER UP AND IT STARTS TO BOOT RPESS THE DELETE KEY THIS WILL GET YOU INTO THE BIOS SETINGS GO TO THE BOOT SETTINGS AND DEVICE PRIORITY SELECT YOUR DVD/CD DRIVE WITH THE WINDOWS DISC IN THEN F10 TO SVE THE SETTINGS AND EXIT WHEN YOU R COMP RESTARTS IT WILL BOOT TO THE DISC DRIVE AND WINDOWS SHOULD START UP.. IF IT DOESNT GO THROUGH THE PROCEEDURE AGAIN AND JUST MAKE SURE THE BOOT SETINGS ARE SET TO THE DISC DRIVE FIRST SETTING.. GOOD LUCK

Check here : How to install a Lexmark printer when the... -

Press the <ALT><F10> keys at boot up to enter the e-Recovery management console.

Enter your e-recovery management password if you do not have one the default password is six zero's (000000)

select Recovery Actions,restore Factory Default

Load main image failed refers to a bad firmware file on the device. You can download and run this recovery tool from the SanDisk website. http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe Best of Luck.