Hi, Was given a Motorola Handie-Talkie Tanpapa: PMUD1481A Model: AAH25KDH9AA6ANFD In good working order, BUT I need an owners manuel to reset and operate. HELP! Thanx, Bob

This is a discontinued radio from Motorola. programming requires a cable to connect to a computer, there is no direct programming available.
While this is not really an answer, the programming software is specific to Motorola and you need to buy both the software and the cables from Motorola.
you would be better served, to determine what frequencies you want and then pay a certified Motorola dealer who has the software to do the work for you.

Kerri

The kebt-650 appears to be a replacement batter for the Motorola Solutions MU and MT Talkabout walkie talkie series.

Contact Motorola Solutions Get Support

Mark
Motorola Mobility Support

You may download the manual from here: http://www.repeater-builder.com/motorola/gp68/pdfs/gp68-um.pdf

You might try http://wirelesspro.com, we have found them to carry most TalkAbout accessories and batteries. Before ordering battery packs, you might try switching your existing good battery to the other radio and see if it solves the problem. This would assure you that it is indeed a battery problem.

One of your buttons would need to be programmed to Scan. This is done using Motorola proprietary software, a cable, and a radio interface box (RIB). Your local dealer should be able to assist you with programming.

More info at http://n1su.com/900.html

Best regards.

http://www.repeater-builder.com/motorola/gtx/gtx-index.html

Welcome to fixya!

In order for anyone to help you, you must supply the make and model of whatever it is you are trying to get help with. Please also provide information on what the problem is.

Please reply back with that information.

Thanks,

Handie Andie

Here is a link to a user guide for the US version of the radio: http://www.connectingyou.com/media/HT1250.pdf

Scanning Channels
Use scanning to monitor channels for transmissions or to find someone
in your group who has accidentally changed channels.
1. Short press MENU until the "Z" appears. The current setting
On/Off will flash.
2. Press either + or – to turn On or Off.
3. Press the PTT to confirm or MENU to continue set up.

Here is a link to the manual http://www.motorola.com/mdirect/manuals/FV200_userguide.pdf

Mostly of this features need to be able by the programing software, this mean that if you dont find it with your menu botton, mean that the radio has disable this features, also depends on the system that provide the service to have this features working, on your profile as customer, ETC Check this link can help you http://www.motorola.com/governmentandenterprise/id_2011i/en-sg/public/functions/browseproduct/productdetailpage.aspx?navigationpath=id_801i/id_1388i/id_1152i/id_188i/id_1363i