I've just replaced the PG40 cartridge in my Canon JX200 fax machine with a remanufactured cartridge. However the fax continues to display the "Recomend New Cartridge" warning. Is there any way to disable the ink monitor on this model to allow for using re-filled / remanufactured cartridges.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Movement of the ink cartridge holder is blocked. There may be a scrap of paper, or staple, or paper clip binding the cartridge from moving. Check for foreign objects. Press and hold the on / off button to power down the fax. Unplug it from the wall outlet for 5 minutes. Plug it back in and power up. Also, check to make sure the cartridge is installed correctly by removing and reinstalling it. If the same error occurs, contact Canon service rep.
Reference page 62 in Users Guide.
Canon use chipped cartridges, if you use a generic or a refilled one that uses the old chip (you have to move the chip yourself) then it will report it as empty, unless you re-set the chip with a chip re-setter that is made for those particular chips.