Question about Fax Machines

1 Answer

We have a samsung er 4900 the registar is locked up with an error code pp 000, what can we do?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 82 Answers

That sounds a drive problem, check to see if there is anything keeping the gears and rollers from turning, like a piece of paper that was not totally remover after a jam.

Thank You,

Mikey

Posted on Apr 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does control panel error code mean #02-000 mean ?


Dear
The code mentioned for thermal related problem at fusser assy.
When the temp. achieved in fusser is bellow the defined temp.(normally 180'c) within 20 sec. this code display. This may be the defect due to the low voltage supply (bellow the rated voltage) or may loosen/open thermistor or may be main board(rare case).

thanks.

Nov 19, 2014 | Samsung CLP670ND - CLP-670ND Color Laser...

2 Answers

If problem persist contact dealer or service rep turn the main power on e301-0001


This is a fuser error, the fuser replacement for this machine is best done by a technician as there is moderate disassembly involved..

Your local canon warranty agent will be a good place to start.

This same printer engine is used in a few HP printers and multifunctions and the fuser is available from HP as well. Though HP are usually slightly dearer.

If you want to have a go yourself the part number is one of the following, depending on your electrical grid voltage un your part of the world
Canon imageCLASS MF4450 Fuser (Fixing) Unit - 120 Volt
RM1-7576-000
or
Canon imageCLASS MF4450 Fuser (Fixing) Unit - 230 Volt
RM1-7577-000

Oct 26, 2013 | Canon ImageCLASS MF4450

1 Answer

Samsung scx 5635 has error code 02-000 is this a fuser problem and how do you reset.


I have a samsung scx-5635 Fn and im getting an error message of 02-0000. what does this code mean?

Sep 12, 2011 | Samsung Fax Machines

1 Answer

I purchased a new Sentry Safe, Model CSW 4747 yesterday. When I unboxed the safe, the safe was open, the lock handle was down, cyclinders were a little pertruding, and the lock cyclinder was popped out. ...


(1) sounds like the interior lock activation screw is still installed. it's the long screw on the inside of the door with the yellow tag; (2) when entering the code, make sure the key is turned to the right; (3) after entering the code, make sure you next press the program button. enter the code wrong three times and it locks up for two minutes.

Sep 11, 2010 | Fax Machines

1 Answer

Z report


a Z report is a Function list report , of how the fax machine is functioning. try initalizing the fax machine and have it print out all functions.

Jul 09, 2009 | Fax Machines

1 Answer

I can't find a manual for the samsung er-2715 electronic cash register. I do not know how to use this product and just got it today.


http://userguides.50webs.com/
They carry cash register manuals, atm manuals,
and POS manuals for automated machines

Jul 13, 2008 | Samsung Fax Machines

1 Answer

My Samsung ER-650 Cash Register lost power due to a lightning storm. It will not turn on.


under the cover of the register there are two fuses. I would start there and cross my fingers

May 31, 2008 | Samsung Fax Machines

1 Answer

Need to reset prevented maintenance code on Panasonic 7735 copier


okay, you need to press these three keys simultaniously
"user preset, ledger, and the number 3" you will enter the service F mode, then press 7 then the print button, then enter 22 then print then press 000 print, 000 print again and a wrench will lite up which means you just reset the maintenance counter. you then must press user preset and clear/stop key simultaniously to exit.


Thank You,

Mikey

Apr 04, 2008 | Fax Machines

1 Answer

Error Code 406


"XMT/RCV password does not match. Last 4 digits of TSI does not match with the last 4 digits of the ONE TOUCH, ABBR Telephone number." This is straight from the Panasonic service manual. I would suggest looking in the User's manual uner "passwords" and try to either reset or clear out the password info.

Dec 17, 2007 | Panasonic Panafax UF-595 Plain Paper Laser...

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fax Machines Experts

CheckitRight
CheckitRight

Level 3 Expert

1349 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

Are you a Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...