Question about Remote Controls

1 Answer

Web need help

How to setup the jumbo remote.

Posted by on

  • Anonymous Apr 04, 2008

    how to set jumbo innovage remote for a tv

  • Anonymous Apr 04, 2008

    how to program innovage jumbo remote ofr a tv

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Posted on May 05, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hello,





    This thread has gone 14 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to program a QuantumFX REM-1114 Jumbo remote to a panasonic VCR


If you wish to get more codes and other details check:
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/
Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

Jan 08, 2014 | Innovage Jumbo Remote Control

1 Answer

I need code for new large remote disabled person


To which device do you want setup codes with Jumbo universal remote control? Brand name? If you wish to get setup code list to jumbo remote control, check this link.

Mar 03, 2013 | Remote Controls

1 Answer

What button do I use for a cablebox


You have to setup the remote control to cablebox. If you wish to get more details about the setup proceedings to jumbo universal remote control, check this link. Setup proceedings to some popular model remote controls, including jumbo remote control is given in detail. Pull up older posts there.

Feb 28, 2013 | Innovage Jumbo Remote Control

3 Answers

I have a jumbo universal remote and i need the code to connect it to my sanyo t.v...how can i get it


Hello
Setup codes for Sanyo TV with Innovage Jumbo remote control are:
004/013/049/108

OK.

Aug 26, 2011 | Innovage Jumbo Remote Control

1 Answer

Need instructions for codes for jumbo remote for symphonic tv with vcr


Hello
Setup code for Symphonic TV/VCR with Jumbo remote control is: [002].
There is no setup codes for TV/VCR combo with RCA RCU600M remote control. OK.

Aug 14, 2011 | RCA RCU600M Remote Control

1 Answer

I need to know how to program a QuantumFx REM-115 Jumbo Universal Remote to a Sanyo television


Hello
Setup codes for Sanyo TV with Innovage Jumbo remote control are:
004/013/049/108/110/180/209
Ok.

Jul 28, 2011 | Innovage Jumbo Remote Control

1 Answer

I have a Sharp TV and cant find my remote control. I have a Jumbo remote control that I would like to program but don't have the codes and instructions on how to program it. Can you help me?


Yes, I can help you...and I'm sorry you had to wait so long for an answer. You will need to go to the website that is the name on the jumbo remote. Example: www.jumbobrandname.com . If you are having trouble locating a web site for this particular remote, you can go to www.universalremote.com for a complete list of "codes" and "programming instructions". But try to get to the web site that coordinates with your remote first. When you get to your chosen site, you will either click onto "codes" or type "codes" in the search box. Make sure you jot these codes down as you will need to try different ones. You will see several codes for every brand of televisions. After you've jotted these down, next you need to go to "programming instructions". Print this page out as you will need it in front of you while you are programming your remote. Follow the easy, step-by-step instructions and I'm confident you'll be operating with your jumbo in no time! Enjoy your day!

Jan 28, 2011 | Innovage Jumbo Remote Control

2 Answers

The sharper image jumbo touch panel remote control, can program every appliance (tv, dvd,etc.) except my directv hd receiver. no codes listed in booklet for the hd receiver, tried the codes for regular...


The instructions that came with my remote were COMPLETELY incorrect. I made note in pen in my jumbo remote manual. After hours of searching the web and piecing together various blogs, I wrote these easy-to-use instructions:
  1. Place the jumbo remote and your old remote on a flat surface, head to head, with a 1" to 2" space in between (the remotes should be aiming at eachother).
  2. Press and HOLD the device button on the jumbo remote (eg. TV) until the jumbo remote's small indicator light turns solid red.
  3. Press the LEARN button once on the jumbo remote. The light will blink rapidly.
  4. On the jumbo remote, press the button that you want to perform the learned action (eg. If you want the jumbo remote to turn your TV on and off, press the POWER button on the jumbo remote).
  5. Press the same button on your old remote (eg. POWER button on my old tv remote control). When the jumbo remote's light changes from rapid flashing to slower flashing, press ENTER on the jumbo remote.
  6. You're done! Try the jumbo remote out (eg. Aim the jumbo remote at your TV, press the jumbo remote's TV button, then press the jumbo remote's POWER button). Your television should turn on or off with your jumbo remote.
You can program any jumbo remote button this way (eg. MENU, EXIT, MUTE). Just make sure you press the same button on each remote in steps 4 and 5 (eg. MENU on jumbo remote, MENU or LIST on old remote).

Jan 04, 2009 | One For All URC-9910 LCD Remote Control

4 Answers

Innovage Jumbo Silver Remote


Hello , I need the code for olevia 32" lcd tv and viewsat sat reciver , thank you , ray

Aug 29, 2007 | Remote Controls

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...