Question about Projection Televisions

1 Answer

Trying to get settings for digivox - Projection Televisions

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I by accident reset everything on my Mitsubishi WT-42313.There is no picture only grey screen.Pls help!!!!!

Posted on Sep 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung sp50l2hx trying to set up hd antenna. I


Go into the menu and select antenna and do auto programm.

Mar 25, 2010 | Projection Televisions

1 Answer

Hi I have a digivox-t and have lost all the channels except rte 1 , really need help to get the channels back .


When (date) did you loose the channels?
Do you have it hooked up to an off air TV antenna or a cable TV box or coaxial cable from your local Cable TV supplier?
Blessings always,
A/V Media Tech Guy

Dec 01, 2009 | Projection Televisions

1 Answer

Tv will only power up for a short time before going into standby mode


Try checking the settings of the TV. Check the sleep timer. If you want, you can set your TV to default to reset all timers (and everything else) to factory settings. Also, try connecting it directly to the power outlet.

Nov 08, 2009 | Projection Televisions

1 Answer

Left side and right side are blury.


With projection sets, there is typically several settings for which you can display an output. You probably have a "wide" or "stretch" as a setting for the tv. What you want is normal, or some setting which doesn't result in a stretch. Widescreen projection tv's try to stretch 4:3 output into the widescreen setting, but usually this just results in the middle being in focus, and the outer 20% to be stretched on each side, bluring the edges.

Try to manipulate as many "tv settings" as possible. For most sets this is only available with the original remote. If you don't have the original remote, changing these settings could prove difficult.

Apr 05, 2009 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

I have A Pioneer SDT50W1 rear projection TV which is about 11 years old. It is in A1 condition but recently I have had a problem when turning on the set. When I press the on off switch on the front of the...


The most likey cause of this is poor solder connections either in the power suply area or the convergence circuit area. If you can solder and are comfortable working inside the set where there are potetially dangerous high voltages (even when unplugged), you maight be able to resolve this yourself. Try resoldering any connections on the boards that appear grainy or have rings. Update this with your results.

Thanks,
Dan

Feb 18, 2009 | Pioneer Projection Televisions

1 Answer

Lost the controller for Pioneer rear projection TV


Try pressing the "Input" button the front of the set. That should allow you to change between the different inputs. The return button usually returns you to the previous channel you were watching - don't think it works for the input though. Also, depending on the model of the set you have, try downloading the PDF user or owners manual - it will tell you how to use the remote.

Jul 25, 2008 | Pioneer SD-533HD5 53" Rear Projection HDTV

1 Answer

This set was working yesterday


your screens are not set properly. Try turning up the green and red slightly to see if the set will restore raster. If not try turning thr blue down slightly. Screen controls have to be adjusted by taking voltage measurements while adjusting the G2 (screens)
let me know if you need additional help

Apr 04, 2008 | Sony KP-53S35 53" Rear Projection...

1 Answer

RCA Projection TV


ok lets begin... shut off? ...is the set staying off. NO POwer at all.. does the set try to come on. does the set have a blinking led on front. have you tried unpluging then waiting 30 min then trying to turn it on again.. this set has a processor and when it detectect any fault will shut the set down

Mar 03, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Picture black and white , no color


try resetting the tv back to factory settings under within the tv's menu setting you should find a setting to reset the tv, most likely all the color and contract settings may have been tunred down,

Sep 08, 2007 | Sony KP-61V90 61" Rear Projection...

1 Answer

Can not reset tv


These sets have a common problem with the front panel buttons sticking and not allowing the set to turn on. Unplugging the control panel and using the remote to turn the set on normally diagnoses that problem (If you try this, remember that once the set is origionally plugged in, it takes about a minute and half before the set can be turned back on. Another problem could be in the convergence circuit. If you hit the power button and the indicator light comes on and shuts off then that is the circuit that is most suspect. The -24 volt line fusible link as well as the 24 volt line will open up if the convergence IC shorts out. There is a way to diagnose this set by pushing in and holding the menu and device button on the set at the same time until the indicator light starts flashing. There are two sets of flashes, such as, 2 flashes and then 3 flashes. Hope this helps.

Jun 03, 2007 | Mitsubishi WS-55513 55" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...