Question about Cnet CWA-854 (CWA854) 802.11b/g Wireless Access Point

1 Answer

It didn`t work with updating the firmware

Hi,
It seemed stable for a while, but it came sneeking back. The accesspoint has IP http://192.168.1.253/ The router I couldnt find an update for. It has the IP http://192.168.1.120.  I cant even download a trailer from apple.com it loads for a while, and then it stops..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Try moving the access point to another spot in the house.

Also you should try changing the channel that you are on and see if that helps.

Try the below order again even if you tried it once.

Update your OS first, if not already done. Search for a firmware update for your specific brand and model of wireless router. And see if your computer's wireless equipment might have a firmware update available. Sometimes these will address and fix similar problems. (Tip: Never update router firmware over a wireless connection.) I don't know what you're using for network security, but if applicable, try changing the router's wireless frequency/channel to something other than default. Experiment a bit. See if distance from router to computer has any impact on a dropped connection. Move the router itself to a different location in the house, if possible. Wireless connections seem to be prone to dropping their signal. I don't know if this is any better with the newer routers coming to market in the near future.

Please post any further comments and keep me updated and I will try to figure this out if the above doesn't work

Posted on Apr 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost my cd setup, where do I get the driver?


Look at this web page and you will get what you need.
http://support.linksys.com/en-us/support/accesspoints/WAP610N
But if you already have it setup, you really don't need it. Plus if you know the IP of your WAP you can open a webpage and put the IP in the address/url location and then you can get into that WAP without the setup software. In reality you really don't need the setup software if you know the default IP to get into he unit.

Apr 17, 2014 | Linksys by Cisco WAP610N Wireless-N Access...

2 Answers

I have a Engenius 3220, can't access on 192.168.1.1, I was change the firmware and can't connect now... are another IP to access, I try whit DDRT tool but not can see the IP.-


Try the program Belarc Advisor. It worked for me. I had the same problem when I updated the firmware of my EnGenius ERB9250 Extender. Once Belarc has displayed everything it has discovered about your computer, scroll down to the area labeled Network Map. There you will find your EnGenius 3220's IP.

Aug 22, 2011 | EnGenius EOC-3220 (EOC3220)

2 Answers

Pleas help me , i can't connect to router becuose cant have ip gatewy i connect by ethernet to router bout cant access to it.


Router's default IP is usually written on its case, check user manual as well.

If you did not change anything in your network settings in your pc/laptop you should have dhcp turn on so press CTRL+SHIFT+ESC and task manager window should appear. Then File->Run.. and type 'cmd' and press ENTER. Black "dos" window should appear. Then type 'ipconfig /all' and press ENTER again and among lots of data you see you should find IP of your gateway.

May 08, 2011 | Cnet CWA-854 (CWA854) 802.11b/g Wireless...

2 Answers

I forgot ip address of my EOC 8610. how do i


Try address 192.168.1.1 in most cases this is default IP for the routers.

Sep 23, 2009 | EnGenius / EOC-8610 EXT / 54Mbps /...

1 Answer

I cant reset my senao eoc3610


1 ) Check if IP address is the correct address of your Gateway.
Check if you can ping.
Be sure you have your Java enabled
Some router requires a specific Browser (IE6 or IE7) and cannot respond to different browser.
Be sure to remove any Java protection from your Browser.
Check with user manual if IP address requires also a specific port number ( 8080 or other).
Be sure to Connect Router using Lan cable
2) Change your PC IP setting to same subnet as your router
Control Panel / Network settings / properties of TCP/IP define an IP address and a subnet mask compatible with Router as gateway.
3) If you are not sure of Router IP address use reset button on router back to factory default; use this to configure router.

Dec 27, 2008 | EnGenius EOC-3220 (EOC3220)

2 Answers

D-link dwl 2000AP


To reset, simply press the reset button with a pin/pencil. This will revert the IP address to 192.168.0.50, sub net 255.255.255.0

It will also set the admin name back to admin and password to blank

I can't answer other questions however.

May 29, 2008 | D-Link AirPlus Xtreme G DWL-2100AP...

1 Answer

Connection Problem


update the firmware of the all device

Feb 23, 2008 | SMC EZ Connect g SMCWEBT-G

Not finding what you are looking for?
Cnet CWA-854 (CWA854) 802.11b/g Wireless Access Point Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cnet Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

noti13

Level 1 Expert

15 Answers

Mike

Level 3 Expert

4331 Answers

Are you a Cnet Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...