Does the Canon MP510 have a power reset button Power will not turn on? I have unplugged and then plugged back in several times. Still will not power up.

turn power switch off so green light is extinguished.

First hold down resume button and then hold down power button so both are held down at same time

When green light comes on, continue holding down power button and let resume button go, then press resume button twice. Then let power button go.

Then press resume button four times, power button should be releasedbefore doing this.

Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on. This normally solves the error problem - if not go through same procedure again.

Welcome to Fixya.

Please try the following steps to resolve this problem - this same procedure worked for my colleague :

• Power off printer
• Hold down STOP/RESET button then Press and Hold down Power button
• Keep Power button down and Release STOP/RESET button
• Push STOP/RESET button twice
• let go of power button
• Wait 20-30 seconds - my display shows "canon Idle"
• Then Push STOP/RESET button four times
• Push Power button twice
• Power off (shut printer down)
• Wait for at least 5 seconds and power it back on

This should do the trick and will get you printing again in no time.

Thanks for using Fixya.

Try to power cycle/reset the printer. Hold the ON/OFF button for on second or until the screen goes off. Wait at least 10 seconds and turn the printer back on. This should reset the device. Also, you can try unplugging it for 15-20 seconds while it is off to help with the reset.

E24 = Purge unit error. You may need to also clean out you waste ink. try this below..Resetting Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970 1. turn off the canon printer 2. resistant "resume button" (red triangles) + key "power" at the same time. 3. tetep hold the "power", release the button "resume Button" 4. without releasing the button "Power", double click the "resume", then then release both keys. 5. click the "resume" four times fast 6. press one time the "power" to confirm "reset counter absorber." 7. to function "disable the printer" press the "power" once again.
Below is your user manual.

http://www.retrevo.com/support/Canon-MP140-Multifunction-Printers-manual/id/3124ci174/t/2/

E16 -E19 = Failed to scan head alignment sheet
www.youtube.com/watch?v=XyT6JsD0o88
Resetting Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970 procedure:

• Turn off the canon printer
• Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
• Hold the Power Button, release the Resume Button.
• Not releasing the Power Button, double click “Resume” and release Both Buttons.
• Click “Resume” for Four times
• Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

http://thamrindsa.wordpress.com/

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Reset Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

I had a similar problem. What worked for me was to remove the power pack, which is secured by two clips. Slide a knife or similar to release the power pack. It will slide out to reveal a mini-plug with five red wires. Disconnect this.

This where it gets a bit uncertain. I plugged in the power pack and put a meter across the outputs. They seemed to be working (ie I was getting voltage). I had a quick look at the indide of the MP510 and decided there was nothing further I could do. I then reassembled everything and, just out of curiosity, pressed the power button again. And it came back to life!

I suspect that in your and my cases, the MP510 had "crashed" and I performed a hard reset by removing and then reconnecting the power pack. But who knows? Best of luck

why error 6502..........?????
Help me pls.........!!!!!!!!!!!