Question about Projection Televisions

1 Answer

Lost picture while watching tv the picture went suddenly off color and multi dimentional or blurry if thats better describes it for a few seconds and then went black, sound remained on but no picture, the red indicator light on the tv which stays on when the tv is on is now blinking, any ideas? it is a Hitachi 53FDX20B projection tv about 6 years old.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Sounds like video card failure mode, 101..you a technically adroit person?

Posted on Apr 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find a guide for my enzer TV ?


There are many types of distortion. Each with its own cause. Please describe the type of distortion. Are there vertical lines? Are the images wavy? Are they off-color? Are they blurry? A better description will yeild a better response.

Dec 16, 2014 | Projection Televisions

1 Answer

TV makes humming noise, lamp light is blinking, does not turn on


Your color wheel needs to be changed. Mine just did the same thing. I changed mine, and the buzzing sound went away, however now my picture washes out with light or yellow colors. The darks look green and purple also.

Mar 28, 2009 | Samsung HL-R6167W 61" HDTV

3 Answers

Hitachi 57F500 blurry picture


its the convergence problem in your tv.the ic needs replacement.to fix the problem.its worth getting it fixed.get it repaired.
the cost will be negligible.

Mar 21, 2009 | Hitachi 57F500 57" Rear Projection...

1 Answer

Picture is blurry


remove front panel and check the 6 control knobs adjust the intensity of each color as well as the focus of the picture with those colors.be sure to mark the knobs so you can return them to there original position if the set shuts off. Good luck

Jan 28, 2009 | Hitachi 51F500 51" Rear Projection...

1 Answer

Sony rear projestion TV has blurry picture.


sounds as if your convergence needs to be set. either through the menu on the tv or remote you need to get to the convergence set screen and you need to line up the crosshairs. this usually happens when the tv is moved or bumped.

Dec 31, 2008 | Projection Televisions

1 Answer

RCA D52W23 breakdown in projection focus


First check capacitors cp150 2200uf 16v and cp114,cp120 220uf 35v If cp150 is puffed up on top it is bad , then there is a fuse FL231 on right side of flyback transfomer it will be the middle fuse if open you will lose convergence on picture .

Dec 30, 2008 | RCA D61W20 61" Rear Projection Television

1 Answer

Blurry, Multi-Color, Multi-Line


covergence problems and its not adjustable you need work done on the convergence board or a new board and realignment which can be timely.

Nov 01, 2008 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

Blurry picture


If the power to the tv was on when the power came back on it may have caused a power surge through the tv and could have knocked the allinment of the colour tubes out a bit you could try to reallin them via small screws on the colour tubes but you need the tv on an it can be difficult.

Jul 14, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Picture distorted and blurry with color


bad convergence amp ic
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Sony Convergence
http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/
http://www.techlore.com/article/19631/Sony-Convergence-Procedure/

Jan 28, 2008 | Mitsubishi WT-46809 46" Rear Projection...

1 Answer

Screen


What you may have needed to do was adjust the green & blue crt screens to match the red. Go into your picture menu adjust, turn color all the way down to a black & white px. Now adjust each crt screen so that you end up with a true black & white px. Then adjust each focus control to get a sharp px, have your tv on a channel like the home shopping network so you can adjust each crt focus one at a time for clarity by cover the other 2 up. Then go back into picure adjust & turn color ahlf way up, you should see a better px.

Jul 01, 2007 | Philips 60P8341 60" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...