Question about Dryers

2 Answers



Posted by on

  • Anonymous May 12, 2008

    Admiral dryer has a vibration when runing?

  • henryce Jan 03, 2009

    My dryer just clicks when I push the start button.  


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

The belt may be broken or may have come off the idler. If not, it could be a bad motor.

Posted on Apr 04, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Actually if nothing turns on than it is probably a bad thermostat. There are three. Two in the front and one deep in the back behind the drum. You can check a thermostat with an ohm meter. You should get continuity at room temperature. If you don't , than the thermo is bad and will not let the dryer turn on.. Two of the thermo's act as kill switches.

Posted on Apr 01, 2010

3 Suggested Answers

  • 43501 Answers

SOURCE: Does the dryer have a pilot light & if so,

The newer dryers have an ignitor that lights the burner...
There is a cover on the bottom front and the igniotr is usually on the right hand front will be a flat black almost glassy like thing...

Here is a tip that I wrote about the ignitor and dryers...


Posted on Apr 08, 2010

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Admiral designer series heavy duty giant capacity 20 lb dryer

two possible problems
the air blower is not running properly
too many clothes being dried restricting air flow

Nov 24, 2016 | Admiral Dryers

1 Answer

Need part number for the blower wheel

We Need the full model number to look it up.

Mar 23, 2015 | Admiral Dryers

1 Answer


Sounds like the drum rollers have gone bad. There are 2 of them inside the back that support the bottom of the drum. The model # seems be off a little since the the websites I checked for parts are not coming up with that #.

To fix it, you will need to pull the drum out. Once you have done that, you will see the rollers. Spin the rollers fast with your hand and if they do not spin smoothly, they should be replaced. You can also check them by by moving the up and down and sideways for any play. Note they will move forward and backwards a little bit. This is normal.

Always unplug your appliance before servicing.

Good luck

Nov 16, 2010 | Dryers

1 Answer

My admiral designer series dryer just stoped working in the middle of a drying cycle what can it be?

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


Sep 08, 2010 | Dryers

1 Answer

My admiral designer series electric dryer is not heating up

Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat


Jun 24, 2010 | Dryers

1 Answer

My admiral designer series stove is showing a F 1

f-1 usuqally meens a stuck key pad.sometimes if you unplug it for a wile it may reset other than that you need to replace the clock/touchpad.

Mar 08, 2010 | Maytag Admiral LER3330AAW / LER3330AAZ /...

1 Answer

Dryer will not work. Makes buzzing sound when

locked up dryer motor,replace-mike

Jul 17, 2009 | Dryers

1 Answer

Dryer stumbles to get started spinning

probably need the wheels and idler inspected

Dec 31, 2008 | Amana NDE2335AY Electric Dryer

1 Answer

Admiral Designer Series

Nov 21, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

873 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers


Level 3 Expert

70374 Answers

Brad Brown

Level 3 Expert

15119 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides