Question about Harman Kardon AVR 225 Receiver

1 Answer

Harman kardon just went dead

I have a harmon kardon 225 receiver and it just went dead when i was listening to it any solution? The front panel is still lit and all functions seem to be working but no sound. We have tried another speaker and still not working.

Posted by on

  • 1 more comment 
  • Anonymous Sep 21, 2008

    This happened now for the 2nd time to me. I sent it out the first time for repair and they replaced 4 parts in total.
    Quantity 2 = 27-.47 1 Watt
    Quantity 1 = 140-100v9-104z Capacitor
    Quantity 1 = 100-100 Taxble chemtec


  • chinch dawg Nov 16, 2008

    goes on protect mode turns off plays at times for 15 minutes yet at times will play all night

  • Anonymous Mar 22, 2014

    battery fine not work

    remote not functioning with fresh batteries

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 105 Answers

You may have overloaded it. Let it rest and cool down. Check the resistance on the speaker to make sure it is in spec with your amp.

Make sure someone didn't accidentally mute it or bump the audio in source wiring.

Make sure your speaker choice (A or B or both or none for headphones only) is correct.

Posted on Apr 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to troubleshooting


prob with the audio amph on the motherboard

Dec 04, 2013 | Harmon Kardon Harman Kardon Harman/kardon...

1 Answer

Cant turn receiver on or off with remote


follow this steps and fix it. God bless you
The batteries are dead.
Replace the batteries.
There is something blocking the receptor on the main unit.
Remove any obstructions and clean the area in front of the receptor.
If the problem persist, open the r.control and clean the keypad from humidity, oxide, dirty, with contacts cleaner. and try again.
Otherwise you must go to repair shop.

God bless you

Oct 09, 2013 | Harmon Kardon Harman Kardon Reciever Avr...

1 Answer

Need manual for harmon kardon avr 325


Contact Harman Kardon for a manual. Note spelling

Apr 18, 2013 | Harmon Kardon Harman Kardon Avr 325 7.1...

1 Answer

I have the Harman Kardon AVR 254. Just recently it stopped responding. It will cut on and the volume dial will respond but none of the front panel buttons will. Any suggestions on a fix?


There should be two fuses on the secondary board of the main power transformer. They don't look like regular fuses - they are small round can fuses. These are probably open. HK under-valued these fuses originally, and they need to be replaced with 3.15 amp.

Jan 17, 2013 | Harmon Kardon Harman Kardon Avr 254 7.1...

1 Answer

We are hooking up our harman kardon avr 2600. does the pvr & dvd player go in to the receiver then out to the tv?


only if the harmon kardon has video in (yellow) and video out. otherwise just the audio should go into the harmon

Mar 13, 2011 | Harman Kardon Audio & Video Receivers

1 Answer

Humming noise


Usually Humming noises come from frequency interferance.  In this case it is being caused by your input sources.  A smiply solution is to replace the cables and or seperate the source cables away from any electircal cords or sources.

Jan 07, 2009 | Harman Kardon AVR 225 Receiver

1 Answer

Was using the harmon kardon avr 225 receiver and the front panel went out. .... screen display of the channel number, volume, or menu item does not work. ...


Try hooking up a yellow video wire from the back of the AVR 225 Monitor out. Should be at the end of the 7 or 8 yellow video ports on the back of the stereo. Next plug the other end into a yellow video in on a t.v. Get your remote, (Harmon/Kardon) and make sure the t.v. is on the correct video input and hit the OSD(on screen display) button on your harmon remote. There should be a setting in there that says VFD under ADVANCED menu option that allows for turning the front of your stereo lights on and off and dimming them half way also. OFF/HALF/FULL are the 3 options I believe.

If this doesnt solve it your display may have crapped out on you.

Jan 22, 2008 | Harman Kardon AVR 225 Receiver

1 Answer

HK AVR 225 front display not working


thats not good power transformers in it went bad do u have it on a nice power strip or direct to wall

Jan 19, 2008 | Harman Kardon AVR 225 Receiver

2 Answers

Harmon Kardon avr 225


i'm the last person that posted wanted to add that we heard a pop in the speakers when the system went out. We'll be taking the box apart soon to see if we can diagnose it...(fuse?)

Jan 01, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Harman Kardon AVR 225 Receiver Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harman Kardon Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you a Harman Kardon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...