Question about Tappan TMS062E1 Microwave Oven

2 Answers

Tappan Microwave All of a sudden my buttons stopped beeping when I touch them.

Posted by on

  • Anonymous Mar 18, 2014

    no sound when you push the buttons

×

2 Answers

Sorry but I gave you a slightly incorrect answer.

The manual link is right, but I meant to say that you should unplug it a few minutes, then try it again.

Sorry I got my wires crossed there!

Posted on Apr 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Tappan Master
  • 8,820 Answers

According to the Q&A in the manual, that's the way they should work.

If you don't have your owner's manual, you may be able to download it here: http://www.frigidaire.com/support/manuals.asp

We're happy to help and we appreciate your thoughtful rating of our answer.

Posted on Apr 08, 2008

  • William Miller
    William Miller Apr 08, 2008

    Sorry but I gave you a slightly incorrect answer.



    The manual link is right, but I meant to say that you should unplug it a few
    minutes, then try it again.




    Sorry I got my wires crossed there!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My start button of microwave suddenly stopped working only its stop button works.What can I do?


You could have a defective door switch. Or, a bad membrane switch on the touch pad. Or, the ribbon cable (if so equipped) between the touch pad and circuit board might not be making connections on all of its wires.

Sep 14, 2016 | Microwave Ovens

1 Answer

How do I get the microwave to stop beeping.It"s beeping and locking the controls by itself.


The touch pad sounds like it is trying to tell you it has a stuck pad. The touch pad will need replacing.

Oct 01, 2014 | GE Microwave Ovens

1 Answer

Panasonic genius 1200w


You may have a failed keypad or moisture or grease on the keypad innards or on the control circuit board itself.
You can find a video here that shows you how to remove the grille & controller in about 5 minutes if it's an over the range model.
You can order Panasonic parts from Encompass here http://tinyurl.com/7qy85y or you can call them toll-free at 866-779-5835.

May 02, 2013 | Panasonic NN-H764 Microwave Oven

1 Answer

My TAPPAN Microwave Oven Model Type: TM5430 B only shows S1 in the display and it doesen't react if i push any othetr buttons. What can i do ???


Unplug the unit, let it sit for a minute to clear power from the control board then plug it back in. If the display still shows S1, that could indicate a bad touch switch on the front panel, a bad connection between the touch panel and the control or a failure in the control. Unless you can get parts cheap and fix it your self, it's not worth paying for the repair.

Jul 08, 2011 | Tappan Microwave Ovens

1 Answer

MICROWAVE BUTTONS WILL NOT RESPOND TO ANY ACTION. IS THE MICROWAVE LOCKED.


Hi and welcome to Fixya, I am Kelly. This is usually from the Child lock being activated: 1. Touch STOP/CLEAR.

2. Touch and hold START/ENTER more than 4 seconds.

LOCKED will disappear and two beeps will sound.

Thanks for choosing FixYa, Kelly

Mar 26, 2011 | LG LMVM2055 Convection/Microwave Oven

1 Answer

Works fine, except the beeps suddenly went silent. Examples: 1. When food is finished cooking, no beep any longer. 2. When pressing any key to set for cooking, no beeps any longer. Never thought that...


On page 21 of the owner's manual (online here), that's covered under "AUDIBLE SIGNAL ELIMINATION":

If you wish to have the oven operate with no audible signals, touch CUSTOM HELP, the number 2 and STOP/CLEAR.

To cancel and restore the audible signal, touch CUSTOM HELP, the number 2 and START/MINUTE PLUS.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Feb 16, 2011 | Sharp R-1520LW 1000 Watts Microwave Oven

2 Answers

Buttons dont work on danby microwave


The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If that doesn't work, leave it unplugged for maybe an hour.

If it still isn;t working I would contact Danby Customer Service US / Canada.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jan 08, 2009 | Danby DMW1146SS Microwave Oven

1 Answer

Tappan microwave


I think the membrane/button for the number 4 is stuck or broken. Due to the nature of a microwave my advice would be to entrust the work to a competant technician. Hope this helps.

Oct 01, 2008 | Tappan Microwave Ovens

1 Answer

It's displaying "lock" and The keypad is not responding.


1. Touch the "CANCEL" pad. 2. Touch and hold the "0" (zero) pad until the word "LOCK" disappears from the display and a single beep is heard. The microwave is locked the same way. You can download a manual similar to your model here: http://tinyurl.com/vpxss

Nov 03, 2006 | Tappan TMT104E1 Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tappan Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Paul

Level 2 Expert

223 Answers

Are you a Tappan Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...