From what I can remember you need to shut off the stereo by holding down the source button and then hold down the function button until the settings come up. The keep hitting function until the time setting appears
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here's a link to the wiring color code for the Mazda 626. This link is to downlaod a copy of the DEH-P4700MP owners manual. The wiring diagram is on page 50. You can simply connect the wires by function to the vehicle wiring. But a better solution to avoid cutting or tapping into the vehicle wiring is to purchase an aftermarket wiring harness. The Metra part number 70-7901 appears to be the correct harness for your vehicle and is available from Crutchfield for $12.99.
you will need to hold down the source button till the unit shuts off
once the unit is off look for a Button with a F (Function) hold this button down till the LCD display turns on it should only take a few seconds.
once the F (Function is active on LCD) press the F Button (i think its X2) till you see the clock
once your are at the flashing clock use the skip buttons on unit to switch numbers after the hr time is set press F Button again to adjust the minutes.............
when this is done press the source button to turn the unit back on and the clock should be set.....
hope this helped
Did you use a harness to connect the wires?
Could be the power line (red) is connect to the ACC (Accessory) orange line, so every time you switch off the vehicle the power to the stereo is interrupted.
With your key on, press and hold the Source button until the unit turns off. Then press and hold the FUNC button to enter the settings menu. Press and release the FUNC button again until you get to the clock display. Then use the deck's left and right control buttons to select whether you're adjusting hours or minutes, and use the up and down buttons to make the adjustments. When you're done press Source again.