Question about LG Projection Televisions

Open Question

LG 42LB9DF TV and LG HR902TA DVD and SH92TA-s surround speakers I cant get sound from the computer on the TV or surround sound....(only get picture using HD cable What do I do as the shop Harvey Norman people are usless and TV is in another section and Ran seperatley 2 the Laptops Plesae help

Posted by on

5 Suggested Answers

MrBob84
  • 90 Answers

SOURCE: No Picture from Component Input #1 or #2 but do have audio via Surrond Sound

Simplest thing would be that your component cables are not HU'd correctly. Having them reversed would do this.


Mr Bob

Posted on Feb 13, 2008

De Engineer
  • 247 Answers

SOURCE: how to connect surround sound

In order of picture and sound quality -- from best to worst:

1. The best way to connect, assuming your TV and A/V Receiver and/or Cable Box have the jacks, is to use a HDMI cable ( this cable is for both sound and video).

2. Use Component Video out to input (3 RCA plugs, Red, Blue & Green) along with RCA Audio out to input (2 RCA plugs for stereo - 1 for mono).

3. Use S-Video out to input (1 din plug) along with RCA Audio out to input (2 RCA plugs for stereo - 1 for mono).

4. Use Video out to input (1 RCA plug, yellow) along with RCA Audio out to input (2 RCA plugs for stereo - 1 for mono).

Be sure to select the correct inputs on your TV and Audio/Video receiver when you are watching TV. For example if you have connected your TV to HDMI 1 and DVD to HDMI 2, you will not see or hear anything if you don't select the correct input on your TV and A/V receiver for the input you want to see and hear.

Detailed connection instructions will be found in your owners' manuals.

Hope this helped you. :)

Posted on Mar 31, 2008

  • 927 Answers

SOURCE: using surround sound

Good Day;
Connect HDMI cable to TV then audio cable back to "SS".
Good Luck, big IRISH.

Posted on Sep 08, 2008

SOURCE: I just purchased a Sherwood

Hi! I will be more than glad to assist you. I f you are going to hook up your cable box - motorola to the sherwood receiver, connect an hdmi cable to the back of the motorola cable box, there is only 1 hdmi output there, then connect the other end to the sherwood receiver on the hdmi input, then connect another hdmi cable to the hdmi output and the other end goes to your rca hd tv.

for the sony dvp, you have only one hdmi out, connect an hdmi cable to the back of the sony dvp if u have another spare. connect it to the hdmi input of the sherwood receiver. there is only 1 hdmi output at the sherwood, so u need to use a component cable to be connected at the back of the sherwood receiver component output then the other end goes to the component input of the hd tv.

if you dont have anymore hdmi cable to hook up your sony dvp, u can use component cable, the connection will goes like this, connect a component cable on the output of the sony dvp and the other end goes to the sherwood component input then connect another component cable to the component output of the sherwood and the other end goes to the rca hd tv on the component input.

I hope this will solve your concern, if you have any question, u can get in touch..

Posted on Aug 21, 2009

  • 55 Answers

SOURCE: NO SOUND FOR TV BUT I HAVE SOUND ON DVD

the bose has to be hooked up to the cable box output and video 1 on the bose. This is the only way it will work

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a picture but no sound, it is hooked up to our surround system and the dvd and radio work and we have sound coming out of the speakers but no tv sound....help


Try switching the external/internal speaker switch on the back of the tv to internal. This way you should at least get sound (from the TV not the sound system) when you change the volume of the TV itself.
Explain your set up if you need more help. By that I mean what do you have hooked to the TV and sound system, Satellite or digital cable box DVD ?
Make a note of where all the inputs to the sound system come from.

Dec 04, 2009 | RCA P56830BL 56" Rear Projection...

1 Answer

Cant get sound surround out of tv


Have you tried looking at the sound set up menu on the TV? Some sets will only output sound via certain sockets which have to be switched on. Others will only output sound via internal speakers till they are switched off etc.

Nov 24, 2009 | Projection Televisions

1 Answer

I cant get my surround sound to work on my new tv.


depending on the outlets, you need to adapt it, just buy the right dvd player, or connect it to a computer. i'm sure you could buy a converter for it but most are built into either or both the amplifer or dvd players.
coxial to fibre convertor are availble from jay-car.

Jun 09, 2009 | Projection Televisions

1 Answer

I have an LG LCD TV (LG 37LG5000 37IN). I also have an older DVD Home Theatre System (SONY DAV-DZ100). It seems that the surround system works well with DVDs but I cannot get the sound to work with DIGITAL...


It works fine if you plug the surround system SCART lead into the AV2 input. I believe this is a 'smart' scart plug (same as SONY but it is not mentioned as in the literature). The AV1 is only good for inputs NOT outputs as well.

Oct 04, 2008 | Projection Televisions

1 Answer

Connect to dvd player


On the back panel of your tv you will see two audio inputs labeled AUDIO TO HI-FI. Plug your surround sound audio jacks, ( red and white ) into that. Plug your video jack ( yellow ) into what ever number input you are going to use for dvd, if needed. This will allow you to watch tv and hear it in your surround sound. You should also go to menu- then- audio option and turn off your tv internal speakers, this will allow your tv remote to control your volume of surround sound. Hope this helped.

Sep 07, 2008 | Hitachi 51F59 51" HDTV Projection...

1 Answer

Surround sound will not come on with the tv but will with the dvd player on


Check to see if your speakers hook up to your dvd player. If so then your your dvd is sourround only.
if not then your tv having a problem.

Aug 18, 2008 | Projection Televisions

1 Answer

Problem with Surround Sound when watching TV


No wonder you havent gotten no reply your listed under wrong tv

May 06, 2008 | RCA D52W19 52" Rear Projection Television

1 Answer

Surround sound works with ht-x30 dvd player when playing a dvd but cannot get surround sound with tv only


Is the surround sound integral to the dvd player and not connected to the tv. if it is connected to the tv either by scart or phono leads. do you have to select another input from the surround sound. such as aux or tv

Mar 23, 2008 | Projection Televisions

2 Answers

No Picture from Component Input #1 or #2 but do have audio via Surrond Sound


Simplest thing would be that your component cables are not HU'd correctly. Having them reversed would do this.


Mr Bob

Feb 10, 2008 | Mitsubishi WS-65809 65" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Projection Televisions Experts

Lawrence Oravetz

Level 3 Expert

7565 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2608 Answers

Are you a LG Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...