Question about Televison & Video

2 Answers

Shadows/convergence w/ picture after being on for aout an hour

Posted by on

  • 3 more comments 
  • gargoyl3 Apr 11, 2008

    Hi, I have the same problem with the very similar Samsung SP52Q7HEX/XSA. In the service convergence menu the red gun can only be adjusted in the left and right direction. It does not move in the up and down directions and is stuck at the "no convergence" position resulting in the red colours being out of sync. Are you able to provide the part numbers and where to get them with instructions if this is a convergence board problem? Thanks.

  • davell Apr 20, 2008

    i have something like a 3d picture with a slight bow in it.




  • peles Aug 17, 2008

    I have the same problem with my Samsung SP52Q7HEX. The blue gun will not adjust horizontal and vertical convergence. Can you please post the part that needs replacement and povide the links of where to buy one? I have a quote from a Samsung technician which is atorcious you are better off buying a new set.



    Eagleburn

  • Kevin Ingham Apr 11, 2009

    Hi

    I have same model with same problem a bowing on the left upper showing purple and green distorted figures

    Caqn you help

    Email kingham@bigpond.net.au

    thks
    kev

  • Kevin Ingham Apr 11, 2009

    Hi

    I have same model with same problem a bowing on the left upper showing purple and green distorted figures

    Caqn you help

    Email kingham@bigpond.net.au

    thks
    kev

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,617 Answers

You will need to replace the convergence ICs. Post your model number and I will post the part numbers along with a link where you can order them and get free step by step installation instructions with pictures so you can do the repair yourself and save about 350.00

Posted on Apr 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 52inch samsung sp52q7 has different colours when i am playing my dvd player only.I tested other dvd players with the wires but still the same problem. but tv programmes n other functions does give good quality picture.Pliz let mi know is there any adjustments that i do need to do or its faulty?

Posted on Oct 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv works it looks Like the picture is three inches to the right. It has a right shadow.


The tv have a problems known as a convergence pictures problems.Tv have any colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board it is dead to causes this problems.The tv convergence board must have be fixed.The tv convergence board must have it parts replaced like 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence picture problems.The tvs shops will cost u like $300-350 for parts and labors.

Aug 24, 2011 | Sony KP-57WS510 57" Rear Projection HDTV

1 Answer

There is a blue shadow (especially around on screen graphics, lettering etc.) when in HD mode. I attempted to align the colors through the color convergence but the blue alignment did not work. I also...


No.This tv have a convergence problems,it dead.The tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board,must be repaired by repacling 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board,to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Feb 14, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Color distortion, hazy snowy screen with thin red lines, suddenly happened had perfect pic 24 hours ago


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board is dead.The tv convergence board require replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 01, 2011 | Mitsubishi VS-50705 50" Rear Projection...

1 Answer

How can that blue shadow be fixed in the picture.


This tv have a convergence problems,it dead.Tv have colors lines R,G,B mis alingment anywhere in the picture,having colors shadow pictures or 3D pictures look alike?The tv convergence board is dead,the 2 STK convergence ICS and some or all of it resistors are dead too.These parts on the tv convergence board,must be replaced to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Dec 15, 2010 | Hitachi 50GX30B 50". Rear Projection...

3 Answers

I have red and green shadows. I tried using the Converge Red/Blue and Multipoint Red/Blue functions as described in the manual but neither worked


The tv 100% have convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv have a dead convergence board,the 2 STK convergence ICS and some or all of it resistors are dead too.These parts on the tv convergence board,must be change to fix the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Dec 10, 2010 | Philips Televison & Video

1 Answer

Blue screen for about a half hour and then still blueish color


Tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D look pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the tv convergence board to solved the tv convergencce picture problems.The shop,will cost u $300-350 for parts and labors.

Oct 20, 2010 | Sony KP-65WV700 65" Rear Projection HDTV

1 Answer

Shadow effect on picture. Picture is fine but there is a red shadow tint to everything (basically everything is written twice, but not in the same spot)


Tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look like.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 19, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Picture shadow


Tv have a problems known as a convergence problems,it dead.Tv colors lines R,G,B mis alignment,have colors pictures shadows or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 12, 2010 | Mitsubishi WT-42413 42" Rear Projection...

1 Answer

I have a LG RT-39NZ40RB and i pressed the Auto Convergence button. Every since there has been a red shadowing around the picture, how can i turn off auto convergence or fix this problem


I suggest waiting an hour then do the auto convergence agian, if this fails then it means there is an issue on the convergence board.

Jan 05, 2010 | LG Televison & Video

1 Answer

Sony KP-61HS10 Rear projection TV blurry /shadows at first start


Sounds like the convergence ic's need to be replaced or resoldered. Sometimes it can be a microfuse if you are lucky. But my question is if you hit the focus button up front does it make it thru the auto convergence? Let me know. Have a good one.

Feb 09, 2008 | Sony KP-61HS10 61" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...