Question about BenQ PE8700 Multimedia Projector

1 Answer

BenQ 8700 projector solution

I contacted Benq and asked about the firmware update. They said there is no such update for this model 9PE 8700) and said that it is probably something to do with the cable signal.
They also suggested using the component but I don't want to do that since I use that for my DVD player.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 563 Answers

Hi Rick

The upgrade is the same one used for the BenQ PE8720

Whoever told you this obviously did'nt know this.

You'll be needing Flashloader and the RS232 cable that came with the Projector.

It is absolutely cheeky of them to suggest that you should just use the Component input for all your applications on this Projector.

Make sure they understand that this was a top of the range Projector when you bought it and that it is not a good enough answer.

Posted on Apr 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Benq w600+ projector the menue will not allow you to enable 3d mode via hdmi using a pc


First check that your computer and HDMI cable are 3D capable, if it still does not work contact Benq support.

Mar 04, 2011 | BenQ W600 DPL Projector 2600 Ansi Lumens...

2 Answers

I need a dmd chip for a BenQ MP515 DLP PROJECTOR out of warrenty... where can i get one


You wll need to contact the local benq service centre in your region. Check out www.benq.com.
Samir

Jan 22, 2011 | BenQ Office Equipment & Supplies

1 Answer

To whom it may concern I am writing this letter on behalf of the Elim Seventh Day Adventist Church, George, South Africa. We have the BENQ MP610 Digital Projector. We are running a series of...


You have to contact BENQ with the required code numbers to get an unlock code. No one else can issue an unlock code.

Contact BENQ in your local country by going to their web pages.

Nov 19, 2010 | BenQ MP610 Multimedia Projector

1 Answer

BenQ MP610 Multimedia Projector


You have to contact BENQ with the required code numbers to get an unlock code. No one else can issue an unlock code. If the projector was stolen, you will not get a code but will probably get a cop at your door instead.

Contact BENQ in your local country by going to their web pages.

Sep 07, 2008 | BenQ MP610 Multimedia Projector

1 Answer

RAGO


Hi rgomez

I've requested the info from BenQ HQ and will give you feedback as soon as I get an answer.

I'm an Authorised BenQ Service Provider , so this is quite easy for me to find out.

Speak to you soon !

May 07, 2008 | BenQ PB6100 Multimedia Projector

1 Answer

BenQ PE8700 DVI problem


Hi guys

All that needs to be done is a firmware upgrade.

This can however only be done by a BenQ Approved Service Provider because if the person doing this makes a balls-up the Projector will be dead as a doornail.

Mar 27, 2008 | BenQ PE8700 Multimedia Projector

1 Answer

BenQ 8700


I had a similar problem with my Benq 8700+. The aspect ratio would show in the R low corner on changinbg resolutions, and would close down to a single line ("anamorphic" for example) which would remain on the screen. I checked the manual (useless) and went through all the set up screens (again useless). In despiration, I decided to try to unplug the projector and did so for 30 seconds to allow the charge to drain from the circuits powering the chips in the 8700+. Upon returning power and restarting, the screen resolution appears/disappears properly once again. Give thjis a try.

Sep 29, 2007 | BenQ PE8700 Multimedia Projector

2 Answers

Problem in logic card of the projector


BenQ has support in India: http://www.benq.co.in/ India India Customer Help Desk 1800-22-0808 (Mon to Fri 0830-1730hrs) Service ID service-In@BenQ.com Sales ID SalesEnquiryIn@BenQ.com (Lunch time : 1:00-2:00hrs PM) But this model is out of production so you may have trouble getting parts.

Sep 28, 2007 | BenQ PB6110 Multimedia Projector

Not finding what you are looking for?
BenQ PE8700 Multimedia Projector Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Office Equipment & Supplies Experts

Tom Chichester

Level 3 Expert

26149 Answers

Teet Bergmann

Level 3 Expert

565 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

Are you a BenQ Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...