Question about Computers & Internet

1 Answer

I have built a computer useing a foxconn mother board No 945g7ma-8ks2h. My Windows Vista Home Premium (bought boxed and new from comets store) will only part load the freeze, Will this board support this program. thank you Bertie Doy

Posted by on

  • Hollyecho Montgomery
    Hollyecho Montgomery May 11, 2010

    There are so many things that could be happening.



    1. Is there at least one gig of memory?

    2. Is the processor at least a 2.6g = or a dual core?

    3. Your video card at least a 256mg ?



    These are needed for vista.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 44 Answers

You might not have enough RAM, (Random Access Memory) RAM is memory that the computer temporarily stores for future commands, and I know Vista takes about 1-2 GB of RAM to run, if it can't handle it, I'd suggest using windows XP.

Posted on Apr 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a chip set for windows vista home premium 32 bit. When I bought my computer I had Vista installed on it and my computer constantly crashed. I had a guy fix my computer, said there was no chipsets...


The chipset (nForce 500) is soldered on the motherboard, it can't be changed. The problems you encountered were probably caused by bad drivers. If you choose to reinstall Vista don't use the driver's disk that came with the pc, get the latest ones from here
http://www.nvidia.com/Download/index5.aspx?lang=en-us
But if you have the money you should buy Windows 7 , it's much better than Vista.

Apr 16, 2010 | ASUS M2N-E SLI (M2N-E SLI GREEN)...

2 Answers

Start up failure;


try to start in safe mode using F5 at the time of window booting

Mar 23, 2009 | Microsoft Windows Vista Home Premium with...

3 Answers

Startup fault


Software Error Or Corrupted windows File files

Jul 15, 2008 | Foxconn (945G7MA-8KS2) Motherboard

1 Answer

Foxconn x38 motherboard support


Please give me the full model number of you're Foxconn mother board. If you no longer have the box the number will be on the motherboard.
Example of other Foxconn model numbers. (Foxconn 865A01-PE-6EKRS), (Foxconn 760GXK8MC), (Foxconn 661MX) & (Foxconn P9657AA-8KS2H).
Type the correct model number into the window to the left of Search. http://www.foxconnchannel.com/EN-US/product/Motherboards/detail_overview.aspx?ID=en-gb0000242

If you still need help just let me know!
Good Luck!

Mike

Jul 06, 2008 | Computers & Internet

3 Answers

Foxconn945G7MA-8KS2h sound problems


Check in the Bios and make sure the onboard sound is actually enabled. Should tell you in the manual how.

Mar 08, 2008 | Foxconn (945G7MA-8KS2) Motherboard

1 Answer

Foxconn 945G7MA-8KS2H IDE BIOS problems


Are you using a 80 pin super ata cable or a old 40 pin?. Have you tried different jumpers on the drive`s slave/mater/cable select?. Have you made sure that all the channels are turned on in the bios?. Make sure they are all set to auto. I know you probable checked all these things already. But just wanted to make sure that you didn't over look some thing simple.

Mar 02, 2008 | Foxconn (945G7MA-8KS2) Motherboard

1 Answer

VIDEO CARD


ur mother board dosnt support the AGP card

Nov 27, 2007 | Foxconn P4M800P7MA-RS2 Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...