Good info I will try this evening, but I have some questions : what is the HOT ? is it the HOT area on PSCB A ? I know that the 135V is not there on power up like the other voltages, how can I check IC1751 ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Standby light on Sony TVs blinks 16 times is abnormal I thiks. It may come up to 8 blinks or so. You jsut switch off the set by AC mains switch at the front panel, switch it again with it and count the exact numbers. Never switch it On_Off by remote hanset.
If it happens even after this process, you just do the following
Press the following button on your remote control as stated "Display"_"Channel"_"5"_"Vol Minus" [not plus] then "Power".
You may get "OVP" "OCP" "V STOP" etc displayed on the screen.
Just report the result to me through Fixya. Ok.
Blinking light* 7 times, Diagnosis: Horizontal deflection stopped. Possible cause: Q8035, 8038 is shorted. (D board), you need to replace or get it serviced by the company if under warranty or get it done tv repair personal ,if like to perform DIY then I would recommend going to the following link and getting the service manual so you can see first hand dis assembly instructions and testing proceedures. Its only 10.99 and they email it to you shortly after purchase. The manual is a valuable resource as it will have part numbers in case you do need a newD board. heres the link. http://servicemanuals.vstore.ca/
The standby light should be blinking in a repeated pattern. Pleawe count the blinks and report that number here. That count indicates the circuit that is having a problem. Also, please confirm that the set is model number KV-32FS100.
5 blinks is an IK balance problem. it means your picture tube is not drawing the correct current on 1 of the 3 cathodes (IK). there is a good chance the tube is bad. if you reported it while under warranty you should call the warranty company and pursue it.