Question about Washing Machines

1 Answer

Spin cycle is not working - Washing Machines

Posted by on

  • 1 more comment 
  • waynster Oct 07, 2008

    macine will go throughall the cycles then when it is time for it to spin it will jst stop at 7 min left. I have replaced the control board and with no change. Any help would e muchappreciated

  • mzaustin Nov 01, 2008

    I have a GLTF2940ESO with the same problem, only with a code E-47 which is a door lock switch? My local appliance dealer tells me that if the switch was faulty it wouldn't do any thing.They advised me the motor control was bad,$170.00 later. I still have the same thing, washes normal, forward and reverse tumble while it pumps out,it never speeds up to high spin.

  • keegs2340 Mar 10, 2009

    I have a whirlpool 5 cycle heavy duty super capacity washing machine tat will not forward to the spin cycle unless I manually turn the dial to spin.

    The part # on the back of the machine says 3953191
    stolle.

    Can you assist me in trouble shooting this problem?


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Macine will go through all the cycles then when it is time for it to spin it will just stop at 7 min left. I have replaced the control board and with no change. Any help would e much appreciated

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Spin Cycle does not work


Suspect that the Timer module is faulty as it does not move automatically to the SPIN mode.
You need to try with another program cycle to confirm or otherwise replacement is the only option. check on cost and options..

Jan 16, 2013 | Washing Machines

2 Answers

This is for a Whirlpool washer and dryer thin stack. All four of the wash cycles work AND all four of the spin cycles work, but the rinse cycles do not work. I have to manually skip it forward past the...


Hello,

I would suspect the water inlet valve as being the problem,if it drains the water and spins the lid switch is going to be good.The thing exclusive to rinse cycles is that they only fill with cold water,and that is what i suspect the problem being is that it's not filling with cold water on the rinse cycle because of a bad water inlet valve.


GENE

Sep 12, 2011 | Washing Machines

1 Answer

My Haier waching machine has a slow spin cycle


I have the same problem with the same washer

Jan 26, 2010 | Haier Washing Machines

1 Answer

Kenmore washing machine didn't spin @ end of cycle


If you tried a different cycle and it worked this means that the timer is probably bad on the main cycle that you use. If the machine does not spin on all cycles, then please check out the LID SWITCH.

Nov 12, 2009 | Washing Machines

1 Answer

Spin cycle doesn,t work


Hi. this is a failed timer device. simply replacing the timer control module will eliminate these issues you are having.

May 27, 2009 | Roper RAX7244KQ Top Load Washer

1 Answer

Doesn't change cycles, first spin and rince cycle doesn't work at all


Sounds like you have a bad timer Does it spin on final cycle? (Spin Cycle)

May 11, 2009 | Washing Machines

2 Answers

Washer will fill fill with water but doesn't start wash cycle


it will fill but won,t spin, will throw out water as if it washed, then it take water to rinse but won,t spin ,then will throw out water as if it did , but clothes are soaked

Feb 21, 2009 | Roper RAS8445KQ Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

880 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...