Question about Cell Phones

3 Answers

Saanyo Spc 3200,When using the voice tag, It works one day and drop them the next day

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi, alot of people have problems using the voice tag and ive give up trying on all the phones ive had over the years the problem is it can be good to use but it has never been relible what i found is that my partner could use the voice tag with her voice but when i tried it it just dont work its a big problem and theirs not much you can do.

Have you tried setting the voice tags in a quiet room as this can help but any slight change in your voice can throw the phone out and causing the problem your having.
When you put voice tag on hold phone about 1 foot away from mouth and then say the tag as if you was talking to someone then give it a try then get back to me ok

Posted on Apr 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 563 Answers

Hi there

It might not necessarily be a problem on the phone. The problem with this is the tone of one's voice. They tend to drop the name if it is not said almost exactly the way it was recorded.

Try talking a bit slower - this sort of clears the voice and it makes it easier for the phone to recognize.

Posted on Apr 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cell Phones Master
  • 19,396 Answers

Does not depend on the phone, is the phone company that provides voice message service.

Posted on Apr 02, 2008

  • Ginko
    Ginko Apr 02, 2008

    If I undertood , you receive the voice message the next day after they have been sent.
    If this is the case, you shoud contact the phone company and mention the problem (Vodaphone, orange etc.).
    If you give me your location and phone company I can find the contact.

    Regards

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to activate voice dial phone feature


Touchscreen phones simplify the wireless world, especially when combined with voice activation. Although making calls using voice commands was an option before touchscreens became available, the method used to set up this feature is different than it is for non-touchscreen units. It can take time to master the set of procedures that will get the feature working.
Step 1
Create a voice tag. Touch "Contacts" on the today screen. This opens the list of contacts on your phone. From here, do one of three things: you can hold your finger on the desired contact and then tap the "Add Voice Tag," you can select the desired contact, tap on "Menu" and then "Add Voice Tag," or you can tap the desired contact to open their personal screen and then hit "Menu" followed by "Add Voice Tag."
Step 2
Record the voice tag on your phone. Touch the phone number to which you wish to add a voice tag then touch the "Record" button. Record your voice tag for that contact. An icon will be displayed to the right of the number when the voice tag is complete. You can listen to your voice tag by touching the "Play" button on the screen or you can delete it to record a new one.
Step 3
Make a voice tag for a program. Tap the "Start" button on the phone. Go to "Settings" and then the "Personal" tab followed by "Voice Speed Dial." Choose the program for the voice tag and record the voice tag in the same manner as you did for the contact. To open the program with the voice tag, tap "Start," "Programs" and then "Voice Speed Dial."
Step 4
Launch a program or make a call. Make a call by tapping "Start" followed by "Programs" and then "Voice Speed Dial." You will hear a beep. Say the voice tag you recorded for the person you wish to call. You can open a program via the same procedure (by speaking the voice tag created for the program).
Step 5
Check the voice tags you created. Tap on "Start," "Settings," "Personal" tab and then "Voice Speed Dial." A voice tag tab appears and displays a list of your voice tags.

Jun 20, 2016 | Cell Phones

1 Answer

Cannot store voice tags


Delete some SMS and you will have more free memory to add a tag to a contact that you must save on the telephone and not on the SIM

May 20, 2014 | Nokia 6275i 6101 6102 6102i 6103 6133 6126...

1 Answer

Want to download audio drivers


Hello,
This laptop is made by TriGem. You can access drivers from this link: http://www.trigem.com/us/support/drivers.asp
Select Notebooks in the category drop down and then 3200 seres in the model drop down. Next click the Averatec 3200 series link just below the model drop down box. The webpage will then populate with available drivers for windows XP and windows 2000. They do not supply drivers for Vista or Windows 7.
Regards, Chris

May 26, 2011 | Averatec 3200 Notebook

1 Answer

Incoming voice is clear but outgoing voice is not working


Check the voice settings.

Click on start and then choose control panel.
Double Click on sounds and audio devices and then use tag for voice or click on voice.

Now click on harware test and then speak and click on next and once again speak and then click on next and end to finish.

You audio harware visit will complete and your device will work properly now. You voice will work for input and ouput.


Good Luck

Dec 07, 2009 | IBM LENOVO VIDEO ADAPTER-G450 32MB 22P6640...

1 Answer

Voice tag


The answer is to turn off the virus checker which stops the voice tag fundtion working. This can be found in start >i btmobile securty. Click on the virus check icon and turn it off - you will then find the voice tag function works. You have to leave the virus checker off which isn't idea and I implore HTC to find a fix for this asap.

Oct 15, 2008 | HTC S710 Smartphone

1 Answer

Voice stopped working


This may be a cold solder connection or mechanicaly defective component on the circuit board. There are many parts in that unit that can cause the described fault.

Jerry G.

May 29, 2008 | Garmin StreetPilot C330 GPS Receiver

1 Answer

What is voice tag of H350 headset?


Voice tag is what enables you to call by speaking. So say you have a contact named Bob on your phone. You press the button and the phone beeps and you say "Bob" to call him. If you say it clearly, the phone will display Bob (and possibly any other contact that is close in name to Bob). If you don't do anything within a few seconds, it will start dialing Bob. That is the voice tag. My guess is your phone does not support voice tag or you dont have any voice tags assigned to your contacts. You will have to call from the handset, not the headset.

Dec 26, 2007 | Motorola Mobility Bluetooth Hands Free...

1 Answer

Nokia N95 Voice tags


i need to say u should save the voice tags in a silent place with keepin the phone at a smalll distance from mouth . say the words cleraly as u are u can repeat the word in the same clarity

Dec 04, 2007 | Nokia N95 Cellular Phone

2 Answers

Sanyo spc 3200 cell phone. setting for unavailable or blocked calls


In the settings menu you can go to "security" then "others" then "limit use" then "Incoming calls" then "phonebook only". This will allow your phone to receive only calls from numbers in your phonebook.

Nov 13, 2007 | Sanyo SCP-3100 Cellular Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

yadayada
yadayada

Level 3 Expert

67912 Answers

William Alequin

Level 3 Expert

856 Answers

meteshadow

Level 3 Expert

489 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...