Question about Kenwood KM800 Major Classic Stand Mixer

6 Answers

Smoking Kenwood Chef A901

When I was running my Chef A901 on speed setting 2, creaming oil and sugar for a cake, it started smoking. This is a 220V unit purchased in 1983 and has had only light use.

The visible wires do not look old or cracked and the unit was still running smoothly although it smelled like something was burning when it was smoking.

I know that nothing could have splashed out of the bowl onto the motor. Any suggestions? Also, do you have any repair manuals (PDF) for this model? My old owners book doesn't show how to get into the motor to check wiring.

Thanks

Posted by on

  • hanell Apr 25, 2008

    Hi smokin Kenny

    I have only a couple of days ago had the some problem.

    It's probly not just the resistor that has gone, mine has got so hot the ID coulors are unreadable, you'll find the smoke came from the capacitor, a 0.1uF, that sits next to it. Best left for a techi to fix. More likely better to replace the board for a new one.

  • hayden456 Nov 25, 2008

    I have the same problem with the A901 model. Can anyone tell me how to take it apart to get to the capacitors?

×

6 Answers

  • Level 1:

    An expert who has achieved level 1.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Just bought all the necessary bits from:
http://www.torreelectrics.co.uk

Posted on Mar 01, 2010

  • Level 1:

    An expert who has achieved level 1.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have just had the exact sme problem.
It is caused by a 1 watt resistor on the board.
You will also find that very possibly the large capacitor, a 0.1uF, has aso burnt out. This capacitor would have cracked open down the side and that is where the smoke came from.
parts can be replaced by a repair man and possibly a better solution is to have the board replaced, They are availiable still.

Posted on Apr 25, 2008

Jim Poole
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem, got a repair kit from eBay, then soldered the bits in myself (learnt how from YouTube) now works like a dream #smug!

Posted on Oct 24, 2012

The resistor is 56 ohm to the 47 nf capasitor and the other is 220 ohm to the 150 nf capasitor. I replaced them all and upgraded the capasitors to 5 watt with ceramic.

Posted on Jul 01, 2008

  • varactor May 23, 2011

    To maintain safety be sure to use class X capacitors. They will be marked 'X' or 'Class X'.

×

Did somebody know the size of the resistor?

the capacitor (0.047uF) and resistor has burn out (I cant read the the size anymore)

Posted on Jun 26, 2008

The resistor will get hot on slow speed (slower the hotter) inspect this closely ,you say "visible wires" ? need to look under the motor cover for the speed control components

Posted on Apr 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

6ya.com

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I service an A901 kenwood mixer, need to get top plate off.
the speed control on my kenwood chef A901 is not working
how do i fix this.

Oct 16, 2012 | Kenwood Chef Major A701 A901 Cm170 Km201...

1 Answer

Black and Decker Spatula Smart Hand Mixer
1990? Dump it and purchase a new one

Mar 17, 2017 | Food Mixers

1 Answer

Kenwood Chef A901 Service Manual
Hi there I am trying to get hold of a copy of the service manual for the A701A mixer.
Would someone be able to send me a copy please....
email is simon@locom.co.uk
thank you to anyone that can help.

Jan 15, 2012 | Food Mixers

1 Answer

I was making a standard cake with my kitchenaid and in the middle of creaming butter and sugar together, it stopped working. Turned it off, switched plugs, let it cool down, etc - it won't turn on now and...
either the electrical motor brushes are worn down on the motors commutator and can no longer contact the motors commutator bands,or if its a newer style mixer the triac that controls the speeds on the unit could have opened up and can no longer supply variable or even high speeds

Aug 01, 2010 | KitchenAid Food Mixers

2 Answers

Service manual needed for kenwood chef a901
Could you send me a service manual for an a901 please? Just inherited one from my nan, and serviced it but stupidly cant remember which order the lower bearings go on the motor :/
gileswjones@hotmail.com

Jul 14, 2010 | Kenwood KM800 Major Classic Stand Mixer

2 Answers

A901 has stopped working
Hello.

first press the boton green inside of the machine, when up the head.
if not working .
then is problems the capacitors and resistors.

Regards
Kenwood Chef Restore

Jan 06, 2009 | Kenwood KM800 Major Classic Stand Mixer

1 Answer

Kenwood chef A901, not working
Found a kit on ebay for 9.99 which fixes the speed cntrol problem on 901 chefs do a search for kenwood motor repair comes with instructions you would need to be ok with a soldering iron

Dec 14, 2008 | Kenwood KM800 Major Classic Stand Mixer

1 Answer

Kenwood Chef model A901 smoke & burning electric smell from motor
there is a kit on ebay for both 701 and 901 kenwoods requires use of soldering iron do a search for Kenwood motor repair it is unlikely to be the motor usually the speed contoller components

Dec 03, 2008 | Kenwood KM800 Major Classic Stand Mixer

2 Answers

Difference Kenwood Chef A701 and Kenwood A901
Hello.

the difference between A701A and A901 is :

high speed outlet
slow speed outlet

planetary hub is similar . A701A, A901 and KM series

A701 Different planetary hub and fit different tools.

is not same A720 and A920 A7 = A701/A
A9 = A901 and KM

In our web site Kenwood Chef Restore in Downloads section.
you can download the compatibility of the models A700, A701 , A900 and KM series .

Regards

Oct 02, 2008 | Kenwood KM400 / KM410 Chef Classic Stand...

3 Answers

Kenwood Chef A701 Variable speed controller malfunction. Appliance only operates on maximum speed.
the solution its change the capacitor or triac, normaly problems in models A701 or A901 old motors

regards
kenwoodchefrestore.co.uk

Aug 07, 2008 | Kenwood KM300 Chef Stand Mixer

Not finding what you are looking for?

View Most Popular

KM800 Major Classic Stand Mixer

  • Food Mixers

Related Question

How can I service an A901 kenwood mixer, need to get top plate off.

  • Kenwood Chef Major A701 A901 Cm170 Km201 Food Mixer Foot Feet X 5 Kw656354

Open Questions:

0 Answers

it only mixes on slow speed it did not come on when i turned the knob ,so we opened it ,when we put it on before mounting it back it was very powerful when we mount it it was very slow

Mar 10, 2016 | Kenwood KM800 Major Classic Stand Mixer

0 Answers

I am in NY, USA. Where can I get my mixer fixed? I also need a downloadable user manual. While mixing cookie dough the other night, the top popped up and the speed dial popped out. Pushed it in but, won't stay and only goes super sonic fast speed. Not good.

Nov 05, 2015 | Kenwood KM800 Major Classic Stand Mixer

0 Answers

how to open kenwood major gear assembly

Aug 06, 2014 | Kenwood KM800 Major Classic Stand Mixer

0 Answers

kenwood chef when it works , the bolt comes out

May 31, 2014 | Kenwood KM800 Major Classic Stand Mixer

See all Kenwood KM800 Major Classic Stand Mixer Questions

Related Topics

Kenwood KM800 Major Classic Stand Mixer Logo

3,439 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Kenwood Food Mixers

Kenwood KM400 / KM410 Chef...

Kenwood KM400 / KM410 Chef...

Kenwood Food Mixers

Kenwood KM800 Major Classic...

Top Kenwood Food Mixers Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Treefrog15
Treefrog15

Level 2 Expert

127 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Are you a Kenwood Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...