Question about Washing Machines

1 Answer

Whirlpool washer machine will not spin when the rinse cycle is activated, I hear the switch moving as soon as it starts to move it cuts out...

Posted by on

  • mariowedge Apr 02, 2008

    this machine was working one til the next water will not come out , machine will not spin it attemps to but cuts out as soon as it starts (whirlpool)

  • mariowedge Apr 02, 2008

    I hear the timer clicking and the water fills up and as soon as the machine starts to move the the switch is silent and the machine stops

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Washing Mach... Master
  • 2,651 Answers

Spund slike a lid switc issue, try opening and closing the lid a few times and as you do listen for a distinctive "click " noise rigth before the lid closes, if you dont hear tha tthe machine is not recognizeing that the lid is down as for safety reasons will not advance to drain/ spin mode. if this is the case youlkl need to replace the lid switch assy

Posted on Apr 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Whirpool Estate washer will not rinse spin or drain


The motor turns in one direction to wash and the other to spin. If it will not spin I feel sure it's a bad motor.
Please rate solution

Sep 04, 2009 | Whirlpool Washing Machines

1 Answer

Washer stopped after wash cycle


The lid switch is the culprit. Push down on the lid it should start. It needs to be adjusted . the tab on the lid is not activating the switch. Try triming the door bumpers.

Apr 10, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

The tub will not spin in the rinse cycle


This sounds like a timer problem if it will spin in other cycles. If you hear a motor running but no spin it is the motor couple.

Mar 12, 2009 | Whirlpool Washing Machines

1 Answer

Whirlpool top load washer gets stuck on spin and stops


your lid switch is most likely bad.you can che.ck this by taking two screws from face of machine and flip face back.you will see a disconnect plug on machine that goes to your lid switch.unplug machine and unplug disconnect at top of washer under the face,you will need a jumper wire to put in 1st and 3rd hole in your disconnected.plug machine back in and see if it will go into spin.you can also put your finger on lid switch and push in on it and if you dont hear it clicking or if you dont see the finger to push in then it is definately lid switch.

Mar 06, 2009 | Whirlpool Washing Machines

1 Answer

Washer will not Spin during SPIN CYCLES


Thanks for the question If your washer sorta spins and washes ok, your problem is with the transmissionTHanks for your question THe Appliance doc

Jul 29, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...